Cisco SPA525G Administration Guide - Page 26
Installing the Firmware (SPA525G), Firmware Upgrade, Firmware Upgrade Window, Submit - rebooting
UPC - 882658261688
View all Cisco SPA525G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2 Getting Started Upgrading Firmware STEP 3 Enter the IP address of your phone. STEP 4 Follow the on-screen directions. Installing the Firmware (SPA525G) STEP 1 Log in to the web interface. STEP 2 Choose the Firmware Upgrade tab. STEP 3 Click Firmware Upgrade Window. STEP 4 Browse to select the firmware file from your PC. Click Submit. The firmware is installed and your phone reboots. Installing the Firmware (WIP310) NOTE: Your computer must be on the same sub-network as the phone you are upgrading. STEP 1 Turn off your WIP310 and connect it to your computer by using the USB cable. STEP 2 Double-click the executable file for the firmware upgrade (for example, doubleclick wip310-5-0-11.exe). STEP 3 Follow the on-screen instructions. STEP 4 When the upgrade is complete, disconnect the phone from your PC and power it on. 24 Cisco SPA and Wireless IP Phone Administration Guide