Cisco SPA525G Administration Guide - Page 275

SPA and Wireless IP Phone Field Reference SPA932 Status B For more information, see "Setting Up the SPA932 Attendant Console" section on page 175. Unit 2 See the description for Unit 1 above. Enter a strings that define the extension and other parameters associated with each lighted button on the second SPA932 unit. Keywords and values are case-sensitive. The configuration script is described in "Setting Up the SPA932 Attendant Console" section on page 175. SPA932 Status This page provides two tabs to display the status of up to two SPA932 units that are supported by a single SPA962: • Unit 1-Displays information about the first SPA932 unit. • Unit 2-Displays information about the second SPA932 unit. Each tab provides the read-only fields described in the following table: Parameter Unit Enable Subscribe Expires HW Version Unit Online Subscribe Retry Interval SW Version Key Name Description Displays if the Unit is enabled or disabled. Displays when the current subscription expires. After the subscription expires, the SPA932 automatically requests a new subscription. Displays the version of the hardware. Displays whether the unit is powered on and connected or not. Displays the length of time the SPA932 waits to try again if subscription fails. Displays the version of the software currently running on the unit. Displays the name assigned to each key (1-32) on the SPA932 unit. Cisco SPA and Wireless IP Phone Administration Guide 273