Cisco SPA525G Administration Guide - Page 28
SPA9X2, WIP310, Select, Settings, SPA525G, Misc Settings
UPC - 882658261688
View all Cisco SPA525G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2 Getting Started Using the Web Administration User Interface If you have trouble accessing the web interface, perform the following steps: SPA9X2 STEP 1 Press the Setup button on the phone. STEP 2 Select Network. STEP 3 Scroll to Enable Web Server and make sure that it is set to Yes. If not, press the Edit soft key and press y/n soft key to set it to Yes. STEP 4 Press OK, then press Save. NOTE: If your service provider disabled access to the web UI, you must contact the service provider. WIP310: STEP 1 In the Home screen, press the Select button to choose Settings. STEP 2 Press the Select button again to reach the Settings menu. STEP 3 Scroll to highlight Misc Settings and press the Select button. STEP 4 Press the left arrow to ensure that Enable Web Server is set to On. STEP 5 Press the Select button to save this setting. SPA525G: STEP 1 Press the Setup button. STEP 2 Select Network Configuration. STEP 3 Scroll to Web Server and make sure it is set to On. STEP 4 Press Save. 26 Cisco SPA and Wireless IP Phone Administration Guide