Cisco WIP310-G1 Quick Installation Guide
Cisco WIP310-G1 Manual
 |
View all Cisco WIP310-G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Cisco WIP310-G1 manual content summary:
- Cisco WIP310-G1 | Quick Installation Guide - Page 1
QUICK INSTALLATION GUIDE Wireless-G IP Phone Model: WIP310 Package Contents • Handset • Phone Charger • Power Adapter • Li-ion Battery • USB Cable • Quick Installation Guide • Read Me First Card - Cisco WIP310-G1 | Quick Installation Guide - Page 2
only fit one way. Do not force. B. Plug the power adapter into the charger and then plug the adapter into a wall outlet Battery Placement C. Charge the phone by placing the handset into the charger. The phone will display a charging icon on the screen. Charger Power Adapter Plug NOTE: The - Cisco WIP310-G1 | Quick Installation Guide - Page 3
the phone is not configured to connect to a network. To connect your phone to your wireless network, you must first configure the phone by setting up a Wi-Fi Profile. There are two ways to configure the Wi-Fi Profile: Automatically via Wi-Fi Protected Setup and Manually. NOTE: The handset should - Cisco WIP310-G1 | Quick Installation Guide - Page 4
router supports this feature, consult your User Guide. Wi-Fi Protected Setup button A. Press the Power/End Call button to power on the phone. Power/End Call button B. When the standby screen displays, press the select button to display the Settings menu. Navigate to the Wireless Setup menu - Cisco WIP310-G1 | Quick Installation Guide - Page 5
. Manual Configuration Use this method to connect to your network if your router does not support the Wi-Fi Protected Setup feature. A. Press the Power/End Call button to power on the phone. Power/End Call button B. When the standby screen displays, press the select button to display the Settings - Cisco WIP310-G1 | Quick Installation Guide - Page 6
you will call these network settings) SSID (the network name that you want to connect to) Wi-Fi Security (None, WEP, or WPA/WPA2 Personal) * Another method of automatically connecting your phone to your nework is by using the Wi-Fi Protected Setup PIN method. See your User Guide for more detailed - Cisco WIP310-G1 | Quick Installation Guide - Page 7
placed near or over a radiator or heat register. •• This product should be operated only from BATTERIES •• Use only the battery type listed in the instruction manual. Do not use lithium batteries or non-rechargeable batteries that may damage the handset and charger. •• Do not dispose of the battery - Cisco WIP310-G1 | Quick Installation Guide - Page 8
battery cells. SAVE THESE INSTRUCTIONS Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA For additional information or troubleshooting help, please contact your Service Provider or visit the WIP310 website at www.linksys.com/wip310. CCDE, CCENT, Cisco Eos
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
QUICK INSTALLATION GUIDE
Wireless-G IP
Phone
Model:
WIP310
Package Contents
Handset
•
Phone Charger
•
Power Adapter
•
Li-ion Battery
•
USB Cable
•
Quick Installation Guide
•
Read Me First Card
•