Clifford Concept 50x Owners Guide

Clifford Concept 50x Manual

Get Clifford Concept 50x PDF manuals and user guides View all Clifford Concept 50x manuals
Add to My Manuals
Save this manual to your list of manuals

Clifford Concept 50x manual content summary:

  • Clifford Concept 50x | Owners Guide - Page 1
    World-Class Auto SecurityTM co5n0cxept Owner's Manual
  • Clifford Concept 50x | Owners Guide - Page 2
    The Concept 50x is covered by one or more of the following Clifford Electronics U.S.A. patents: 4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215; 5,157,375; 5,467,070 and other patents pending.
  • Clifford Concept 50x | Owners Guide - Page 3
    Table of Contents Standard Features of the Concept 50x 2 Your 4-button/12-channel remote controls 6 How to use your keychain remote AutoLock and AutoUnLock 14 False Alarm Prevention and FACT - False Alarm Control and Test 14 SmartPowerUp II 14 Smart Self-Powered Siren with Digital ComLink 15
  • Clifford Concept 50x | Owners Guide - Page 4
    the Clifford Concept 50x. UltraSecure Coded Valet Mode™ - Ensures that no thief can turn off your Concept 50x like they can all other brands of alarms. Remote Even if a thief were to pull the fuses or cut all the wires, the starter and fuel pump remain immobilized. Failure-Proof Driving Safety -
  • Clifford Concept 50x | Owners Guide - Page 5
    of the Concept 50x (cont.) Remotely Adjustable Dual-Zone Proximity Sensor- Two sensor zones provide full protection: If someone is lurking near your car, the system will sound a warning tone. But if a thief actually leans into the passenger compartment, the system will instantly blast the siren. It
  • Clifford Concept 50x | Owners Guide - Page 6
    light flash sequence will audibly and visually alert you from a distance if an intrusion attempt was foiled while you were away. Your Concept 50x will even identify the specific trigger or sensor that detected the intrusion attempt. Remote Controlled Courtesy Lighting - For your personal safety and
  • Clifford Concept 50x | Owners Guide - Page 7
    , the system will specifically identify the problem, thereby eliminating time-consuming and costly trouble-shooting. Patented Malfunction AutoBypass with Automatic Monitoring - In the unlikely event of a trigger or sensor malfunction, Concept 50x automatically bypasses the malfunction and arms all
  • Clifford Concept 50x | Owners Guide - Page 8
    control button (this works better than holding the button down). The 4-button/12-channel remote control is the key to your system. It has Clifford's Anti-CodeGrabbing (ACG) technology for the ultimate protection against "code-grabbing" devices (see page 8). You will use your remote to arm and disarm
  • Clifford Concept 50x | Owners Guide - Page 9
    the system is disarmed) 3 silently arm or disarm no - 3 4 activate an optional accessory no - 4 5 arm or disarm a Concept 50x on your second vehicle yes once 1 Command a Concept 50x on your second vehicle to 6 optionally turn on a timed device (if the system is armed) AND yes once
  • Clifford Concept 50x | Owners Guide - Page 10
    remote control on page 6) can activate accessories such REGARDLESS OF as the IntelliStart remote engine starter, remote power window ALARM STATE control, Concept 50x systems and accessories on your other vehicles, etc. Anti-CodeGrabbing (ACG) with Random Code Encryption Protects you and your
  • Clifford Concept 50x | Owners Guide - Page 11
    AutoArming will restart from the beginning once all doors are closed. Concept 50x has these additional AutoArming features: AutoArming enable/disable: If you the ignition switch to "ON" then "OFF." You will hear a single siren chirp to confirm that the system will not AutoArm. The system reverts to
  • Clifford Concept 50x | Owners Guide - Page 12
    Valet Mode In seconds, thieves can disable all other alarm brands by hotwiring the ignition and flicking an easy various times, you will need to switch the system off. For instance, when having your car serviced, washed or parked by a valet. Your factory-set valet code is the single digit "2." NOTE
  • Clifford Concept 50x | Owners Guide - Page 13
    . The LED will turn off to confirm that the system is now in its normal operating mode. Setting your own secret valet code Since all Concept Series systems have the same factory-set code, it is highly advisable that you set your own valet code. You may choose any 1-, 2-, or 3-digit
  • Clifford Concept 50x | Owners Guide - Page 14
    's window. 2. Turn the ignition to the "ON" position, enter your valet code, then press and hold the momentary side of the switch until you hear a siren chirp. 3. Flick the switch to the latched position and back to center five times. Pause. You will hear 5 chirps. 4. Tap the momentary side of the
  • Clifford Concept 50x | Owners Guide - Page 15
    activated. Even if a thief were to cut all the wires or even find the Concept 50x control unit and disconnect it, he would still be unable Trunk trigger 6 blinks Hood trigger * If your vehicle has a factory-installed feature that turns off or dims the interior courtesy lights five seconds or
  • Clifford Concept 50x | Owners Guide - Page 16
    the system serviced by your local Authorized Clifford Dealer. If allows your installer to track down Concept 50x, has its sensor sensitivity set too high (see Remote Sensor Adjustments on page 12). Clifford's exclusive FACT feature ensures you'll never experience repeated false alarms. If the siren
  • Clifford Concept 50x | Owners Guide - Page 17
    battery drain. Personalized Siren Sounds: Most alarm sirens have a single "warble" tone. A few offer "six-tone" sirens that cannot be adjusted or require destruction of circuit wires to change the sounds (the change is permanent and cannot be changed again). Your Concept 50x siren is different. As
  • Clifford Concept 50x | Owners Guide - Page 18
    a few settings, you'll find that programming Concept 50x is so easy that you can even do it examples on page 19. Step-by-step programming instructions 1. Refer to the Table of user-selectable features its momentary side for 3 seconds until you hear a siren chirp (the system LED will also turn on to
  • Clifford Concept 50x | Owners Guide - Page 19
    EXAMPLE 1: Turn on AutoArm & Lock When the system AutoArms (see page 9), it does not normally lock the doors to ensure that you cannot accidentally lock the keys inside the vehicle. To enable this feature, you'll note that "AutoArm & Lock" is in column 3, row 2 of the table on pages 19-20. The "off"
  • Clifford Concept 50x | Owners Guide - Page 20
    on your other cars with the same remote control, you can buy additional remote controls from any Clifford Dealer and program them into the system yourself. Each Concept 50x will respond to as many as four 12-channel ACG remote controls. To add a new remote control to the system, use the procedures
  • Clifford Concept 50x | Owners Guide - Page 21
    channel 4 accessory upon remote arming: on/off this feature is for installers only NOT USED D Set accessory timer duration: 1sec - 2min (30sec of each remote that will be used with your Concept 50x). NOTE 6: The accessory timer starts as soon as Clifford Electronics, Inc., 1996 31-106A/C5xHOLOM/896
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
Owner's Manual
World-Class Auto Security
TM
concept
50x