Cobra CDR 835 CDR 835 Quick Start Guide - English

Cobra CDR 835 Manual

Cobra CDR 835 manual content summary:

  • Cobra CDR 835 | CDR 835 Quick Start Guide - English - Page 1
    .MOV files and can be played by most video players on both PC and Mac. STORAGE An 8GB MicroSD card comes installed in this dash cam, but it supports cards up to 32GB as long as they are Class IV or higher. For full product manuals, firmware updates and additional language support, visit www.cobra.com
  • 1

CDR 835
QUICK START GUIDE
©2015 Cobra Electronics Corp., Part No.: 480-1049-P, Printed in China, Version A
CONTROLS & CONNECTIONS
INSTALLATION
COMPUTER CONNECTION
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and/or other countries.
MOUNT
Screw the included suction cup
into the mount. Slide the mount
into the camera and press the
lever to secure the unit
to your vehicle’s windshield.
POWER
Plug the unit into your vehicle’s
cigarette lighter plug.
DRIVE!
When power is applied the unit
will automatically turn on and
start recording.
Press
to stop recording and
to start again.
Pressing
at any time will capture a still photo.
Press
to create an
Emergency Recording
.
Emergency Recordings will not be overwritten by Continuous
Loop Recording.
Press
to turn the screen
OFF
.
The dash cam will
continue recording.
Press any button to turn the screen
back
ON
.
1
2
3
For full product manuals, firmware
updates and additional language support,
visit www.cobra.com
Power/Volume
Button
Microphone
Micro SD
Card Slot
Emergency Recording
Button
Micro
USB Port
HDMI
Output
LED
Indicator
Quick Release
Mount
Button 4
Button 1
Button 3
Button 2
Accessory Port
(Not Used)
CONTINUOUS LOOP RECORDING
When the MicroSD Card is full it will overwrite the oldest clips
to make room for new footage.
G-SENSOR
A built-in accelerometer senses sudden accelerations or
collisions and automatically protects footage surrounding the
incident so that it will not be overwritten by Loop Recording.
PARKING MODE
Parking Mode provides security while your vehicle is parked.
If the dash cam doesn’t sense any motion for a set time, the
screen will turn off and recording will stop.
If motion is detected or the G-Sensor is triggered, the camera
will automatically wake up and start recording again.
Note:
Parking Mode is
OFF
by default.
You can turn it
ON
in
the Video Settings Menu.
ACTION CAM MODE
Action Cam Mode can be turned on by entering Video Settings...
Loop Clip Time. In this mode, continuous loop recording and
the G-Sensor are disabled.
The functions of Buttons 1-4
are indicated by the icon directly above
each button and change depending on the state of the unit.
KEY DASH CAM FEATURES
To view videos on a computer connect the dash cam using the
included cable.
Select
Connect to Computer
on the dash cam.
It will mount
as a drive on the computer called
DriveHD
.
Movie clips and photos can be found in the DCIM folder.
Video clips are saved as .MOV files and can be played by
most video players on both PC and Mac.
STORAGE
An 8GB MicroSD card comes installed in this dash cam,
but it supports cards up to 32GB as long as they are
Class IV or higher.