Cobra COBRA JUMPACK - CPP 7510 CPP7510 Manual

CHARGE

INPUT

OUTPUT

CHARGE

INPUT

OUTPUT

5V

CHARGE

INPUT

OUTPUT

5V

Customer Support & Trademarks:

Customer Support

Should there be any problems with this product or further information

needed on its features please visit www.cobra.com for support, frequently

asked questions, Declarations of Conformity, and the electronic manual.

Waste Electrical and Electronic Equipment Information

This product has required the extraction and use of natural resources for

its production. It may contain hazardous substances that could impact

health and the environment, if not properly disposed. In order to avoid

the dissemination of those substances in our environment and to

diminish the pressure on the natural resources, we encourage you to use

the appropriate take-back systems for product disposal. Those systems

will reuse or recycle most of the materials of the product you are disposing

in a sound way.

The crossed out wheeled bin symbol informs you that the product

should not be disposed of along with municipal waste and invites you

to use the appropriate separate take-back systems for product disposal.

If you need more information on the collection, reuse and recycling

systems, please contact your local or regional waste administration.

You may also contact your supplier for more information on the

environmental performances of this product.

The product label is located on the bottom of the unit.

Trademark Statement

Cobra, JumPack and the snake design are proprietary trademarks of

Cobra Electronics Corporation, USA.

CPP7510

User Manual

Portable Power - Anytime, Anywhere!

Thank you for purchasing the Cobra CPP7510 JumPack

™

portable jump starter PowerPack. Before using this

product, please read these instructions carefully to learn

about the features and capabilities of the JumPack and

how to get the best performance.

Note: Please charge your CPP7510 JumPack completely

prior to using it for the ﬁrst time.

©2016 Cobra Electronics Corp.

Part No. 480-1075-P

Printed in China

Version A

2

3

Charge the JumPack fully prior to use.

Precautions when working with the JumPack:

WARNING:

Keep the unit clear of fire and water.

WARNING: Shock Hazard.

Keep away from children. Do not

insert foreign objects into the Jump Start Cable Input, the

USB Output Port, or the Charge Adapter Input Jack. Do not

expose this product to water, rain, snow, condensation, or

spray. Do not open the JumPack to replace the internal

battery. No user replaceable parts are inside the JumPack.

WARNING: Explosion Hazard.

Do not use this product where

there are flammable fumes or gases, such as an inadequately

vented bilge of a boat, or near propane tanks. Do not use this

product in an enclosure containing automotive-type lead-acid

batteries.

The Jump Start Cable clamps must be connected positive to

positive (red clamp to battery [+]) and negative to negative

(black clamp to battery [-]).

WARNING: Fire Hazard

Do not crush or puncture the JumPack. Never allow the Jump

Start Cable’s red and black clamps’ metal contacts to touch each

other or another common metal conductor.

This could cause

damage to the unit and/or create a

fire hazard. The jump start

feature is designed only for starting vehicles, and Jump Start

Cables must be disconnected from the vehicle's battery and from

the JumPack once the vehicle starts.

When jump starting a vehicle with the JumPack, turn the ignition

key for

no more than

3 seconds

at a time.

IMPORTANT SAFETY INSTRUCTIONS

Caution: Operating temperature

Do not expose the JumPack to temperatures over +113° F (+45° C) or

under -14° F (-10° C). Using the JumPack at high or low temperatures

may reduce the internal battery capacity and shorten the battery life.

Note:

In extreme cold weather conditions, please store the

JumPack indoors for best results.

The JumPack is supplied with a rechargeable Li-Cobalt battery.

This battery is self-contained and not consumer replaceable. Battery must

be disposed of properly when it no longer holds a charge. Proper

charging practices will increase the life of the batteries.

For information

on battery recycling call toll free 800-822-8837.

Precautions when working with vehicle batteries:

WARNING: Explosion and fire hazard

1.

Follow all instructions published by the battery manufacturer and the

manufacturer of the equipment in which the battery is installed.

2.

Make sure the area around the battery is well-ventilated.

3.

Never smoke or allow a spark or flame in the vicinity of the

engine or batteries.

4.

Be careful not to drop a metal object on the battery or allow a

metal tool to simultaneously touch the positive and negative

cable ends or battery terminals.

5.

Remove personal metal items such as rings, bracelets,

necklaces, and watches when working with batteries. Batteries

produce a short-circuit current high enough to weld a ring or

other similar objects to metal, causing a severe burn.

6

. If you need to remove a battery, always remove the negative

terminal from the battery first. Make sure all accessories are

off to prevent causing a spark.

7.

Someone should be within range of your voice, or close enough

to come to your aid when you work near batteries.

8.

Have plenty of fresh water, soap and a supply of baking soda on

hand in the area of the batteries in case of contact with battery

acid. Baking soda neutralizes lead acid battery electrolyte.

4

5

Product:

Battery Status Indicator

Light Bar

Jump Start

Cable Input

USB 5V

3A

Amp Output

LED Flashlight

Flashlight/Battery

Charge Level Button

Car Adapter

Recharging the JumPack:

The CPP7510 JumPack can be recharged with the supplied Car

Adapter or with the supplied AC Adapter.

When the CPP7510 is charging, the light bar will show the current

battery charge level. The last section of the light bar that is lit will blink

to show that the JumPack is charging. When the JumPack is fully

charged the light bar will turn off automatically.

For best battery performance the JumPack should be fully

recharged every 3 months.

Operation:

Check Battery Charge Level:

To check the battery charge level of the JumPack press the

button on the top of the unit with no device connected.

The green light bar will show the remaining battery charge level:

1st Section on

: 10%-40% charge

2nd Section on

: 40%-65% charge

3rd Section on

: 65%-85% charge

4th Section on

: 85%-100% charge

Note:

When charging a device the section light may decrease

because the JumPack cannot accurately measure the capacity

during rapid charging. To confirm the actual battery charge level,

disconnect the device being charged and press the

Flashlight/Battery Charge Level Button.

Charge Adapter

Input Jack

Jump Start Cable

with Clamps

AC Adapter

6

7

8

9

10

11

Starting a Vehicle:

1

.

Make sure the JumPack is fully charged.

2.

Turn off all the accessories on the vehicle.

3.

Connect the RED clamp to the POSITIVE post of the battery.

4.

Connect the BLACK clamp to the NEGATIVE post of the battery.

5.

Connect the Jump Start Cable into the Jump Start Cable Input.

Be sure that the plug is firmly pressed into the JumPack.

6.

Turn the ignition key to start the vehicle. Do not crank the

ignition for more than

3 SECONDS

at a time.

7.

If the vehicle does not start on the first try,

WAIT FOR

1 MINUTE

before trying to start the vehicle again

.

NOTE:

If your vehicle does not start after 3 attempts, consult

with a mechanic.

If the engine starts:

8.

Immediately disconnect the Jump Start Cable from the

JumPack, then from the battery posts.

9.

Leave the engine running for at least twenty minutes to

allow the vehicle’s battery to recharge.

START

This device complies with part 15 of the FCC Rules.

Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Note:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television technician

for help.

WARNING:

Any modifications made to this device that are not expressly

approved by party responsible for compliance could void the user’s

authority to operate this device.

Cobra

®

and the snake design are registered trademarks of

Cobra Electronics Corporation, USA.

Cobra Electronics Corporation™ is a trademark of Cobra

Electronics Corporation, USA.

PROPOSITION 65 WARNING: This product contains a chemical known to

the State of California to cause cancer and birth defects or other

reproductive harm.

FCC Statement:

Charging a 5V USB Device:

• Lithium Cobalt rechargeable battery.

• 200 Amp Starting Current / 400 Amp Peak Current.

• 5V/3 Amp USB Output for rapid charging of portable devices.

• High Intensity work LED light, strobe and SOS.

•

Rechargeable by car adapter, or 120 VAC Wall Adapter.

Product Features:

LED Flashlight:

Press the Flashlight/Battery/Charge Level Button for

3 seconds

to

turn on the LED flashlight. Press again to activate the strobe

function. Press again to activate the SOS function. Press again to

turn Off.

Product Specification:

•

Li-Cobalt rechargeable battery: 11.1V/28Wh

•

Size:

5.03” x 2.87” x 0.98”

(128mm x 73mm x 25mm)

•

Weight:

10.58 oz. (300g.)

•

Recharge times:

car or home - 4 hours

•

Starting/Peak Current:

200 Amps/400 Amps

•

USB Output:

5V

3 Amps

Limited 1-Year Warranty:

For Products Purchased in the U.S.A.

Cobra Electronics Corporation warrants that its Cobra CPP7510

JumPack Charger, and the component parts thereof, will be free of defects

in workmanship and materials for a period of one year from the date of first

consumer purchase. This warranty may be enforced by the first consumer

purchaser, provided that the product is utilized within the U.S.A.

Cobra will, without charge, repair or replace, at its option, defective

products or component parts within the warranty period upon delivery to

the Cobra Factory Service Department, accompanied by proof of the date

of first consumer purchase, such as a duplicated copy of a sales receipt.

You must pay any initial shipping charges required to ship the product

for warranty service, but the return charges will be at Cobra’s expense,

if the product is repaired, this warranty gives you specific rights, and

you may also have other rights which vary from state to state.

Exclusions:

This limited warranty does not apply:

1.

To any product damaged by accident.

2.

In the event of misuse or abuse of the product, or as a result of

unauthorized alterations or repairs.

3.

If the serial number has been altered, defaced or removed.

4.

If the owner of the product resides outside the U.S.A.

All implied warranties, including warranties of merchantability and

fitness for a particular purpose are limited in duration to the length of

this warranty.

Cobra shall not be liable for any incidental, consequential or other

damages; including, without limitation, damages resulting from loss of

use or cost of installation.

Some states do not allow limitations on how long an implied warranty

lasts and/or do not allow the exclusion or limitation of incidental or

consequential damages, so the above limitations may not apply to you.

For Products Purchased Outside The U.S.A.

Please contact your local dealer for warranty information.

Product Service:

For any questions about operating or installing this new Cobra

product, or if parts are missing…

PLEASE CALL COBRA

FIRST

…do not return this product to the store. If this product

should require factory service, please call Cobra before sending the

product. This will ensure the fastest turn-around time on any repair.

If Cobra asks that the product be sent to its factory, the following

must be furnished to have the product serviced and returned:

1.

For Warranty Repair include some form of proof-of-purchase,

such as a mechanical reproduction or carbon of a sales receipt.

Make sure the date of purchase and product model number are

clearly readable. If the originals are sent, they cannot be returned;

2.

Send the entire product;

3.

Enclose a description of what is happening with the product.

Include a typed or clearly printed name and address of where

the product is to be returned, with phone number (required

for shipment);

4.

Pack product securely to prevent damage in transit. If possible,

use the original packing material;

5.

Ship prepaid and insured by way of a traceable carrier such as

United Parcel Service (UPS) or Priority Mail with delivery

confirmation to avoid loss in transit to: Cobra Factory Service,

Cobra Electronics Corporation, 6500 West Cortland Street,

Chicago, Illinois 60707 U.S.A.;

6.

If the product is in warranty, upon receipt of the product it will

either be repaired or exchanged depending on the model.

Please allow approximately 3 – 4 weeks before contacting Cobra

for status. If the product is out of warranty, a letter will

automatically be sent with information as to the repair charge or

replacement charge.

For any questions, please call 773-889-3087 for assistance or visit

us online at: www.cobra.com

OR

12

13

Starting a Vehicle continued:

NOTES:

The JumPack is designed for gasoline powered

passenger cars in good working order and with batteries that are

not damaged but require assistance commonly due to leaving

lights on, cold temperature, or sitting unused for limited periods

of time.

The JumPack jump starter uses a special high current battery

to provide up to 400 peak amps to start your engine. It can

provide 200 amps starting current to jump start up to 3 cars on

one charge. After this, the unit must be recharged.

The JumPack is intended to jump start a vehicle with a

battery that is not completely discharged.

To charge a 5V USB device, connect the device’s cable to the

JumPack’s USB output.

The JumPack will turn on and start charging the device

automatically. The green light bar will indicate the device

is charging.

Once the device reaches its charge capacity and ceases charging,

the light bar will turn off.

The Cobra line of quality products includes:

CB Radios

Dash Cams

Radar Detectors

Marine VHF Radios

Power Inverters

Accessories

www.cobra.com

NOTES

Checking the Fuse:

The Jump Start Cables are designed with an in-line fuse to protect

the Jumpack in the event of an over-load condition. The Jump Start

Cables include a clear case to that the in-line fuse is intact:

Fuse Intact

CAUTION:

Do not use the Jump Start Cables if the fuse appears

to opened or damaged. For any questions, please call 773-889-3087

for assistance or visit us online at: www.cobra.com

Open or Damaged Fuse

NOTES

Battery Status Indicator

Light Bar

CHARGE

INPUT

OUTPUT

5V

Cobra COBRA JUMPACK - CPP 7510 CPP7510 Manual

Cobra COBRA JUMPACK - CPP 7510 Manual

Cobra COBRA JUMPACK - CPP 7510 manual content summary: