Cobra Cobra JumPack Cobra JumPack

CPP 7500

User Manual

Portable Power - Anytime, Anywhere!

Thank for purchasing the Cobra CPP 7500 JumPack

™

jump

starter portable PowerPack. Before using this product, please

read these instructions carefully to learn about the features

and capabilities of the JumPack and how you can get the

best out of it.

Note:

Please charge your CPP 7500 JumPack completely

prior to using it for the first time.

©2014 Cobra Electronics Corp.

Part No. 480-936-P

Printed in China

Version B

Charge the JumPack fully prior to use.

WARNING:

Keep the unit clear of fire and water.

WARNING: Shock Hazard.

Keep away from children. Do not

insert foreign objects into the jumper cables port/jack, the USB

output port, or the DC input jack. Do not expose this product to

water, rain, snow, condensation, or spray. Do not open the

JumPack to replace the internal battery. No user replaceable

parts are inside the JumPack.

WARNING: Explosion Hazard.

Do not use this product where

there are flammable fumes or gases, such as in the bilge of a

gasoline-powered boat, or near propane tanks. Do not use this

product in an enclosure containing automotive-type lead-acid

batteries.

The jump start cable clamps must be connected positive to

positive (red clip to battery

(+)) and negative to negative (black

clip to battery (-)).

A reverse polarity connection (positive to

negative) may cause damage to the JumPack and/or create a

sparking/explosion hazard.

WARNING: Fire Hazard

Do not crush or puncture the JumPack. Never allow the jump start

cables’ red and black clamps’ metal contacts to touch each other or

another common metal conductor.

This could cause damage to the

unit and/or create a

fire hazard. Always disconnect the jump start

cables from the JumPack after each use and store separately. The

jump start feature is designed for short term operation only.

Turn the ignition key for

no more than

3 seconds

at a time.

Operating the jump start feature for more than

3 seconds

may

cause damage to the unit.

Allow the JumPack to cool down for at

least

1 minute

after each jump start attempt.

IMPORTANT SAFETY INSTRUCTIONS

Caution: Operating temperature

Do not expose the JumPack to temperatures over +113° F (+45° C) or

under -14° F (-10° C).

Using the JumPack at high or low temperatures

may reduce the internal battery capacity and shorten the battery life.

Note:

In extreme cold weather conditions, please bring the JumPack

indoors for best results.

Precautions when working with batteries

WARNING: Explosion and fire hazard

1.

Follow all instructions published by the battery manufacturer and the

manufacturer of the equipment in which the battery is installed.

2.

Make sure the area around the battery is well-ventilated.

3.

Never smoke or allow a spark or flame in the vicinity of the engine

or batteries.

4.

Be careful not to drop a metal object on the battery or allow a

metal tool to simultaneously touch the positive and negative cable

ends or battery terminals.

5.

Remove personal metal items such as rings, bracelets, necklaces,

and watches when working with batteries. Batteries produce a

short-circuit current high enough to weld a ring or other similar

objects to metal, causing a severe burn.

6

.

If you need to remove a battery, always remove the negative

terminal from the battery first. Make sure all accessories are

off so you don’t cause an arc.

7.

Someone should be within range of your voice, or close enough to

come to your aid when you work near batteries.

8.

Have plenty of fresh water, soap and a supply of baking soda on

hand in the area of the batteries in case of contact with battery acid.

Baking soda neutralizes lead acid battery electrolyte.

9.

The JumPack is supplied with a rechargeable Li-Cobalt battery.

This battery is self-contained and not consumer replaceable. Battery

must be disposed of properly when it no longer holds a charge. Proper

charging practices will increase the life of the batteries.

For information

on battery recycling call toll free 800-822-8837.

Product:

Jumper cable with clamps

Battery Status Indicator LEDs

Jump Starter Cable Input

12V DC Charge Input

USB 5V/2.1 Amp Output

LED Flashlight/Strobe

Light/ S.O.S Light

Power/Flashlight/Battery

Capacity Button

Home adaptor

Car adaptor

Recharging the JumPack:

The CPP 7500 JumPack can be recharged with the supplied 120V AC

wall charger connected to an AC home outlet or with the supplied 13.8V

DC vehicle charger.

When the CPP 7500 is charging; the LEDs will show the current battery

life. The last LED that is lit will blink to show that the JumPack is charging.

When the JumPack is fully charged the LEDs will turn off automatically.

For best battery performance the JumPack should be fully recharged

every 3 months.

Operation:

Check Battery Capacity:

To check the battery capacity of the JumPack press the

Power/Flashlight button on the top of the unit with no device

connected. The blue LEDs will show the remaining battery capacity:

1

LED on: 10%-40% charge

2

LEDs on: 40%-65% charge

3


4


Note:

When charging a device the number of lit LEDs may

decrease while the JumPack is in use. The battery capacity

indicator cannot accurately measure the capacity during rapid

charging. To confirm the real battery capacity, disconnect the

device being charged and press the power/flashlight/capacity button.

Battery Status Indicator LEDs

.1.

.2.

.3.

.4.

Cobra Cobra JumPack Cobra JumPack

Cobra Cobra JumPack Manual

Cobra Cobra JumPack manual content summary: