Cobra JumPack Mini JumPack - CPP 8500 Manual

CPP8500 mini

User Manual

Portable Power - Anytime, Anywhere!

Thank you for purchasing the Cobra JumPack

®

mini

CPP8500 jump starter portable power pack. Before using

this product, please read these instructions carefully to

learn about the features and capabilities of the JumPack

and how you can get the best out of it.

Note:

Please charge your JumPack mini completely prior

to using it for the first time.

©2018 Cobra Electronics Corp.

Part No. 480-1133-P

Printed in China

Version A

IMPORTANT SAFETY INSTRUCTIONS

Product:

Battery Status Indicator Light Bar

Jump Starter Cable Input

5V / 9V Charge Input

Wireless

Charge Pad

Recharging the JumPack:

The CPP8500 can be quickly recharged with the supplied micro USB

to standard USB cable connected to a 5V/9V Quick Charge

™

compatible 2.0 USB source, laptop or USB output AC adaptor (not

included).

When the JumPack is charging, the Battery Status Indicator Light Bar

will show the current battery charge level. The last section of the light

bar that is lit will blink to show that the JumPack is charging. When the

JumPack is fully charged the light bar will turn off automatically.

For best battery performance the JumPack should be fully

recharged every 3 months.

Operation:

Check Battery Capacity:

To check the battery capacity of the JumPack press the

Power/Charge Button on the left side of the unit with no device

connected. The green lightbar will show the remaining

battery capacity.

1st Section on

: 10%-40% charge

2nd Section on

: 40%-65% charge

3rd Section on

: 65%-85% charge

4th Section on

: 85%-100% charge

Note:

When charging a device the section light may decrease.

The battery capacity indicator cannot accurately measure the

capacity during rapid charging. To confirm the real battery

capacity, disconnect the device being charged and press the

Power/Charge Button.

Battery Status Indicator Light Bar

1

2

3

4

Smart Jumper

Cables With

Clamps

Micro USB to

Standard USB

Cable

5

USB 5V / 9V Output

OUTPUT 5V/9V

INPUT 5V/9V

Starting a Vehicle:

1

.

Make sure the JumPack is fully charged.

2.

Turn off all the accessories on the vehicle.

3.

Connect the RED clamp to the POSITIVE post of the battery

and the BLACK clamp to the NEGATIVE post of the battery.

4.

Connect the battery cables into the jump cable port.

Be sure that the plug is firmly pressed into the Jump Starter

Cable Input.

5.

Check the tricolor status LED on the jumper cables. When the

LED is green the JumPack is ready to start the vehicle.

6.

Turn the ignition key to start the vehicle. Do not crank the

ignition for more than

3 SECONDS

.

NOTE:

If your car does not start after 3 attempts, consult with

a mechanic.

If the engine starts;

7.

Disconnect the cables from the JumPack, then from the

battery posts.

8.

Leave the engine running for at least twenty minutes to

allow the vehicle battery to recharge.

9.

If the vehicle does not start on the first try,

WAIT FOR

1 MINUTE

before trying to start the vehicle again

.

START

6

Charging a USB Device:

To charge a USB device, connect the device’s cable to the JumPack’s

USB 5V/9V Output.

The JumPack will turn on and start charging the device automatically.

The green light bar will indicate the device is charging.

Once the device reaches its charge capacity and ceases charging,

the light bar will turn off.

Note:

When charging a device the section lit may decrease because the

JumPack cannot accurately measure the capacity during rapid charging.

To confirm the actual battery charge level, disconnect the device being

charged and press the Power/Charge Level Button.

Note:

Some smartphones and portable devices use Qualcomm

Quick Charge

®

technology that allows fast charging. The JumPack is

compatible with Quick Charge devices. The JumPack can be recharged

with a Quick Charge adapter (not included).

Charging a Device with the Wireless Charge Feature:

Power Charge Button

1

.

Make sure the JumPack is fully charged.

2.

Press and release the Power Charge Button on the side of

the JumPack. (The LED lightbar will show the capacity of the

JumPack).

3.

Place the smartphone on top of the JumPack with the screen

facing up.

4.

The smartphone will begin to charge.

5.

Once the device is fully charged or removed the JumPack will

stop charging and shut down.

LED Lightbar

OR

(AC adapter not included)

Power/

Charge

Button

Power/

Charge

Button

Precautions when working with the CPP8500:

WARNING:

Keep the unit clear of fire and water.

WARNING: Shock Hazard.

Keep away from children. Do not insert

fingers or foreign objects into the Jump Start Cable Input, the USB

Output Port, or the Charge Input Jack. Do not submerge this

product in water, expose to rain, snow, condensation, or spray for

long periods. Do not open the JumPack. The battery is self-con-

tained and there are no user replaceable parts inside the JumPack.

Do not use the JumPack if it is damaged or modified. Damaged or

modified batteries may exhibit unpredictable behavior resulting in

fire, explosion, or risk of injury.

Do not operate the JumPack or accessories with a damaged cord or

plug. To reduce the risk of damage to cords pull from the connector

rather than the cord when unplugging.

Use of an accessory or an attachment not included with or

recommended for the JumPack may result in a risk of fire, electric

shock, or injury.

WARNING: Explosion Hazard.

Do not use this product where there

are flammable fumes or gases, such as an inadequately vented bilge

of a boat or near propane tanks. Do not use this product in an

enclosure containing automotive-type lead-acid batteries.

WARNING: Fire Hazard

Do not crush or puncture.

CAUTION: Operating temperature and environment

Do not expose to temperatures over +113° F (+45° C) or under

-14° F (-10° C). Using at high or low temperatures may reduce the

internal battery capacity and shorten the battery life.

Exposure to

fire or temperatures over +265° F (+130° C) may cause explosion.

Exercise care when using in wet conditions.

Note

: In extreme cold weather conditions, please store indoors for

best results.

Under abusive conditions, liquid may be ejected from the battery; avoid

contact. Liquid ejected from the battery may cause irritation or burns.

Note

: If contact accidentally occurs, flush with water.

If liquid contacts

eyes, additionally seek medical help.

The CPP8500 is supplied with a rechargeable Li-Cobalt battery. When

charging the JumPack work in a well ventilated area and do not restrict

ventilation in any way. Proper charging practices will increase the life of the

batteries. The unit and battery must be disposed of properly when it no

longer holds a charge. Proper charging practices will increase the life of the

batteries. For information on battery recycling call toll free 800-822-8837

.

CAUTION:

This device is not intended for use in a commercial repair facility.

Precautions when working with vehicle batteries:

WARNING: Explosion and fire hazard

1.

Follow all instructions published by the battery manufacturer and the

manufacturer of the equipment in which the battery is installed.

2.

Make sure the area around the battery is well-ventilated.

3.

Never smoke or allow a spark or flame in the vicinity of the engine

or batteries.

4.

Be careful not to drop a metal object on the battery or allow a metal

tool to simultaneously touch the positive and negative cable ends

or battery terminals.

5.

Remove personal metal items such as rings, bracelets, necklaces,

and watches when working with batteries. Batteries produce a

short-circuit current high enough to weld a ring or other similar

objects to metal, causing a severe burn.

6

. If you need to remove a battery, always remove the negative

terminal from the battery first. Make sure all accessories are

off to prevent causing a spark.

7.

Someone should be within range of your voice, or close enough to

come to your aid when you work near batteries.

8.

Have plenty of fresh water, soap and a supply of baking soda on

hand in the area of the batteries in case of contact with battery acid.

Baking soda neutralizes lead acid battery electrolyte.

Laptop

Cobra JumPack Mini JumPack - CPP 8500 Manual

Cobra JumPack Mini Manual

Cobra JumPack Mini manual content summary: