Cobra SLR 500 Operating Instructions

2. Standby Screen

Compass Heading (SLR 600 Only):

See reverse side of this manual for information on how to calibrate

your compass.

City/Highway Indicator:

Shows curent filtering mode. See reverse side of this manual for

more information.

Vehicle Battery Voltage:

Displays your car battery voltage and automatically warns you if

this drops below 11.9V.

IntelliMute Indicator:

See reverse of this manual.

Operating Instructions

b. Dash Mounting

For dash mounting, use the enclosed hook & loop fastener

with double-sided tape.

Simply attach it to the bottom of the

unit with display in flip-up position.

Touch-Point Controls

Appropriate touch-point icons will light up automatically to

show you available options.

Touch the touch-point icons to

activate corresponding function.

Touching

Volume

touch-point while receiving an alert

will mute the audible alert. Touching

Display Brightness

touch-point will turn off the display.

Models SLR 500/600

Supercharged Long-Range

Radar/Laser Detectors

Printed in China

Part No. 480-767-P Version A

NOTE:

These devices complies with part 15 of FCC rules: Operation is subject

to the following two conditions: (1) These devices may not cause harmful

interference, and (2) These devices must accept any interference received

including interference that may cause undesired operation.

CAUTION:

Modifications or parts not approved by Cobra Electronics

Corporation may violate FCC Rules and void authority to operate this equipment.

Types of Screens

1. Menu/Settings Screen

User Settings:

For customizing settings for IntelliMute, Auto Mute, Voice/Tone

Alerts, Color Themes (SLR 600), Smart Power, Compass (SLR 600)

and Reset to Factory Default.

Alert Settings:

For customizing settings to turn on/off certain individual radar

bands and Low Car Battery Warning.

Navigate through

Settings

using the

scroll touch-point.

Press

Select

to confirm and

Menu

to save and exit.

3. Radar/Laser Alert Screen

Radar bands consist of X-band, K-band, Ka-band, and Ku-band.

With Radar signals, the signal strength meter shows signal strength

of the radar gun as well as relative proximity to the source.

With

Ka-band, you will also be notified of the actual Ka-band radar gun

frequency being used.

With Laser signals, you will always receive full alert and pulse rate

(PPS) of the corresponding laser gun being used.

Laser PPS cur-

rently in use are: 100, 125, 130, 200, 238 and 340.

Ka Band Alert

Signal

Strength

Frequency

Laser

Pulse

Rate

User

Settings

Alert Settings

Volume

Display

Brightness

Right

Scroll

Left

Scroll

City/Highway

Mode

Menu/Save

& Exit

Select

Thank you for purchasing Cobra

®

Vedetta

™

Series, Model

SLR 500/

SLR 600

Radar/Laser Detector. Please familiarize yourself with the

capabilities your new detector can provide by reading this manual.

Also, please be careful when using your new detector while driving.

Powering Unit On/Off & Mounting Unit

Plug in the detector using the included cigarette lighter power cord.

Press the

Power

button momentarily to turn the unit

On

(or

Off

).

Note:

To change display orientation, press and hold the

Power

button for 2 seconds.

a. Windshield Mount

Lift lever on suction cup base before attaching to the windshield.

Once attached, push against windshield and lock the lever down.

Use the ball-joint adjustment and make sure the detector unit is

aligned level and pointing straight ahead.

The display can be in

flip-up or flip-down position to suit preferred mounting location,

and rotated to face directly toward you. Renew suction cup with

a damp cloth or by rinsing under tap water.

Insert bracket

here

Attach to windshield

Power Jack

Power Button

SLR 600

SLR 500

SLR 500 standby screen shown

City/Highway

Indicator

Vehicle

Battery

Voltage

IntelliMute

Indicator

Compass

Heading

SLR 600 standby screen shown

Cobra SLR 500 Operating Instructions

Cobra SLR 500 Manual

Cobra SLR 500 manual content summary: