Coby DVD 224 User Manual - Page 11

Unpack the unit. Read through this owner`s manual before installation and use. Load batteries into the remote control unit. Connect the system, make sure the connectons are secured. Connect the power plug to the AC power outlet. Loading batteries to the remote control Remove the battery compartment cover. Load two AAA (UM-4 or R03) batteries into the battery compartment. Make sure that the batteries have been inserted in the correct polarities matching to the symbols+,marked in the battery compartment. Close the battery compartment cover. When replacing batteries, replace both batteries. Do not mix new and used batteries operating together, otherwise, the operation lifetime will be much shorter than normal. Remove the batteries if the unit will not be used for a prolonged period of time. GETTING STARTED Switch on the player Press the main power switch on the DVD player. Power on the TV set, and the amplifier if connected. Set up the system Select the corresponding setting of the TV set (AV1, AV2, S-Video, DVD etc.). For VCR or R F modulator connection, select the corresponding turned channel until the DVD screen appears. If amplifier has been connected, select the corresponding output mode. Load a disc Press OPEN/CLOSE button on the remote control ( or front panel ) to eject the disc tray. Load a disc, label side up, onto the disc tray and press OPEN/CLOSE button. Automatic playback The unit will take a few seconds to load the disc`s initial data, display the disc type logo on the left upper corner on screen, and then start playing back automatically. E Normally, when a MP3 disc is loaded, the player will take longer time to load. If a DVD disc menu appears on screen Press PLAY button on the remote (or on the unit)to start playing. Press the ARROW buttons to select the desired feature in the menu. SELECT And then press SELECT button to confirm a selection in the menu. The remote control transmits a directinal infr ared beam. Be sure to aim the remote control directly at the infrared sensor of the unit during operation. If the sensor has been covered or there is a large object between the remote control and the sensor, the sensor will not respond. The sensor may not able to receive the remote signal when it is exposed to direct sunlight or a strong artificial light (fluorescent or strobe light). In this case, change the direction of the light or reposition the unit to avoid direct lighting. DVD-216 DVD/CD-PLAYER 8 POWER Remote Within approximately sensor 6 meter (20 feet) 30 0 300 123 456 789