Compaq 2210b HP Compaq 2210b Notebook PC - Maintenance and Service Guide
Compaq 2210b - Notebook PC Manual
View all Compaq 2210b manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 2210b manual content summary:
- Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 1
HP Compaq 2210b Notebook PC Maintenance and Service Guide - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 2
Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 3
! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 4
iv Safety warning notice - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 5
Display components ...5 Top components ...6 Pointing devices ...6 Buttons and fingerprint reader 7 Keys ...8 Lights ...9 Front components ...11 Left- procedures Preliminary replacement requirements 29 Tools required ...29 Service considerations 29 Plastic parts 29 Cables and connectors 30 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 6
feet ...36 Battery ...37 Hard drive ...38 Memory module ...40 WLAN module ...42 Optical drive ...45 Keyboard ...47 Switch cover ...49 Display assembly ...51 Top cover ...55 RTC battery ...58 Front LED board ...60 Bluetooth module ...61 Speaker assembly 62 Microphone ...64 System board ...65 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 7
Windows Vista 111 Creating recovery discs 111 Backing up your information 111 When to back up 112 Backup suggestions 112 Backing up specific a recovery in Windows 116 Initiating a recovery from the hard drive recovery partition 116 Backup and recovery in Windows XP 117 Creating recovery - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 8
10 Power cord set requirements Requirements for all countries and regions 129 Requirements for specific countries and regions 130 11 Recycling Battery ...131 Display ...131 Index ...137 viii - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 9
Memory Description HP Compaq 2210b Notebook PC wireless local area network (WLAN) antennae 2 customer-accessible/upgradable memory module slots Supports dual-channel memory Supports up to 4 GB of system RAM PC2-5300, 667-MHz, DDR2 Supports the following configurations: ● 4096-MB total system memory - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 10
Hard drives Optical drives Diskette drive Microphone Audio Modem Ethernet Wireless Description ● 1024-MB total system memory (512 × 2, dual-channel) ● 1024-MB total system memory (1024 × 1) ● 512-MB total system memory (512 × 1) Supports 9.5-mm, 2.5-inch hard drives Customer-accessible Serial ATA - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 11
1-way scroll Taps enabled as default Windows Vista® Hardware Start Button Power requirements 65-W AC adapter with localized and pointing stick cable plug support (3-wire plug with ground pin, supports 3-pin DC connector) 8-cell, 2.55-Ah (73-Wh) Li-ion battery 4-cell, 2.25-Ah (37-Wh) Li-ion - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 12
Category Serviceability Description Windows® XP Professional FreeDOS (India and Thailand) FreeDOS (Thailand) Restore Media: Windows Vista Business 32 Windows Vista Home Basic 32 Windows XP Professional DRDVD XP DRDVD Vista End-user replaceable parts: AC adapter Battery (system) Hard drive Memory - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 13
component identification Display components Component Function Wireless antennae (2)* Send and receive wireless signals to communicate with WLANs. the areas immediately around the antennae free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 14
TouchPad Moves the pointer and selects or activates items on the screen. (2) Left TouchPad button Functions like the left button on settings. View or change pointing device preferences as follows: ● In Windows Vista, select Start > Control Panel > Hardware and Sound > Mouse. ● In Windows XP, - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 15
and fingerprint reader Item (1) Component Power button (2) Info button (3) Presentation button (4) Wireless button settings, follow these steps: ● In Windows Vista, select Start > Control Panel > System and Maintenance > Power Options. ● In Windows XP, select Start > Control Panel > System - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 16
Item (6) Component Volume scroll zone (7) HP Fingerprint Sensor (fingerprint reader) Keys Function Adjusts speaker volume. Slide your finger to the left to decrease volume and to the right to increase volume. Allows a fingerprint logon to Windows, instead of a password logon. Item (1) - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 17
is in the Sleep state (Windows Vista) or in Standby (Windows XP). ● Blinking rapidly: An AC adapter with a higher power rating should be connected. ● Off: The computer is off or in Hibernation. ● Amber: A battery is charging. ● Green: A battery is close to full charge capacity. ● Blinking amber - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 18
on the front of the computer is visible whether the computer is open or closed. †The 2 wireless lights display the same information. The light on the wireless button is visible only when the computer is open. The wireless light on the front of the computer is visible whether the computer is open or - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 19
is in the Sleep state (Windows Vista) or in Standby (Windows XP). ● Blinking rapidly: An AC adapter with a higher power rating should be connected. ● Off: The computer is off or in Hibernation. ● Amber: A battery is charging. ● Green: A battery is close to full charge capacity. ● Blinking amber - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 20
RJ-11 (modem) jack (5) Optical drive (6) Optical drive light Function Connects an AC adapter. Connect optional USB devices. Connects a network cable. NOTE: The RJ-45 (network) jack provides Gigabit Ethernet functionality. Connects a modem cable. Reads optical discs and, on select models, also - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 21
port (7) Vent (8) Security cable slot Function Supports optional ExpressCard/54 cards. Supports the following optional digital card formats: MultiMedia Card (MMC) and Secure Digital (SD) Memory Card. Connects an optional USB device. Connects an optional S-Video device such as a television, VCR - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 22
. Contains a memory module slot. Holds the battery. Contains a WLAN module slot. CAUTION: To prevent an unresponsive system, use only a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you install the module - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 23
3 Illustrated parts catalog Serial number location When ordering parts or requesting information, provide the computer serial number and model number located on the bottom of the computer. Serial number location 15 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 24
Computer major components 16 Chapter 3 Illustrated parts catalog - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 25
Switch cover (includes LED board and cable) 454398-001 454006-001 (3) Keyboards (include keyboard and fingerprint reader board and cable) 453994-001 (5) RTC battery 449137- Memory module compartment cover Hard drive cover Front LED board (includes front LED board cable) 453996-001 System - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 26
001 Base enclosure (includes rubber feet) 453993-001 Batteries 8-cell, 73-WH 454002-001 4-cell, 37-WH 454001-001 WLAN modules Intel 802. , Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 27
, Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, the United States, Uruguay, Venezuela, and Vietnam ● For use in - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 28
, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe ● For use in Japan 441090-291 Intel 802.11b/g WLAN module for use in Thailand 448675-004 Memory modules (PC2-5300, 667-MHz, DDR2) 2048-MB 417506-001 1024-MB 414046-001 512-MB 414045-001 Hard drives (include hard drive bracket) 200 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 29
Cable Kit Item Description Cable Kit: (1) Bluetooth module cable (2) Modem module cable (includes RJ-11 jack) (3) Microphone (includes receiver) Spare part number 454008-001 Cable Kit 21 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 30
Kit Item Description Plastics Kit: (1) ExpressCard slot bezel (2) WLAN module compartment cover (includes one captive screw, secured by a C-clip) (3) Memory module compartment cover (includes one captive screw, secured by a C-clip) (4) Hard drive cover (includes 2 captive screws, secured by C-clips - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 31
Item Description (5) Computer feet (4) (6) Base enclosure screw covers (4 covers, 2 sizes) Mass storage devices Spare part number Item Description (1) Hard drives (include bracket ) 200-GB, 4200-rpm 160-GB, 5400-rpm 120-GB, 5400-rpm 80- - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 32
Miscellaneous parts Description 65-W AC adapter Power cords: For use in Australia For use in Japan For use the United States Screw Kit ● Phillips PM3.0×4.0 screw ● Phillips PM2.5×12.0 captive screw ● - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 33
-W AC adapter 398393-002 Bluetooth module NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is included in the Cables Kit, spare part number 454008-001. See Cable Kit on page 21 for more Cable Kit information. 414045-001 512-MB memory - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 34
Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, 448675-004 Intel 802.11b/g module for use in Thailand 449137-001 RTC battery 449139-001 Modem module for use only in Japan and Asia Pacific countries - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 35
System board cell, 37-WH battery 454002-001 8-cell, 73-WH battery 454004-001 12.1-inch, WXGA, display assembly 454005-001 Switch Keyboard for use in the United States 454017-281 Keyboard for use in Thailand 454017-291 Keyboard for use in Japan 454017-AB1 Keyboard for use in Taiwan 454017-AD1 Keyboard - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 36
, 533-MHz FSB, includes replacement thermal material) 455400-001 Display bezel (includes nameplate) 455585-001 Miscellaneous Display Kit 455586-001 Display Cable Kit 456226-001 Fingerprint reader board 457906-001 Speakers 457907-001 ExpressCard assembly 28 Chapter 3 Illustrated parts catalog - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 37
● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers ● Torx T8 screwdriver Service considerations The following sections include some of the considerations that you must keep in Apply pressure only at the points designated in the maintenance instructions. Preliminary replacement requirements 29 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 38
Cables and connectors CAUTION: When servicing the computer, be sure that cables are placed in is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Before handling a drive, be sure that you are discharged of static electricity. While handling a drive - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 39
normally for a while, then degrade in the internal layers, reducing its life expectancy. CAUTION: To prevent damage to the computer when you are removing or installing internal components, observe these precautions: Keep components in their electrostatic-safe containers until you area ready to - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 40
electric charges. Workstation guidelines Follow these grounding workstation guidelines: ● Cover the workstation with approved static-shielding material. ● Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and equipment. ● Use conductive field service - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 41
grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance or floor mats with hard ties to the ground ● Field service kits ● Static awareness labels ● Material-handling packages ● Nonconductive - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 42
shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 43
, that must be removed, replaced, or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement. Serial number Report the computer serial number to HP when requesting information or ordering spare parts. The serial number is located on the - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 44
Computer feet The computer feet are adhesive-backed rubber pads. The feet are included in the Plastics Kit, spare part number 454010-001. There are 4 rubber feet that attach to the base enclosure in the locations illustrated below. 36 Chapter 4 Removal and replacement procedures - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 45
then unplugging the AC adapter from the computer. Remove the battery: 1. Turn the computer upside down on a flat surface, with the battery bay toward you. 2. Slide the battery release latch (1) to release the battery. 3. Remove the battery (2) from the computer. Install the battery by inserting it - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 46
through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). Remove - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 47
on the hard drive and slide the hard drive (3) to the left to disconnect it from the system board. 6. Remove the hard drive (4) from the hard drive bay. 7. If it is necessary it from the hard drive. Reverse this procedure to reassemble and install the hard drive. Component replacement procedures 39 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 48
system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). Remove the memory module - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 49
5. Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the memory module slot. Reverse this procedure to install a memory module. Component replacement procedures 41 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 50
-001 Canada, the Cayman Islands, Chile, Colombia, Costa Rica, the Dominican Republic, Ecuador, El Salvador, Guam, Guatemala, Haiti, Honduras, Hong Kong, India, Indonesia, Malaysia, Mexico, Panama, Paraguay, Peru, Saudi Arabia, Taiwan, Uruguay, the United States, Venezuela, and Vietnam ● For use in - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 51
, Hungary, Iceland, India, Indonesia, Ireland, system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 52
.) 6. Remove the WLAN module (3) by pulling the module away from the slot at an angle. NOTE: WLAN modules are designed with a notch (4) to prevent incorrect installation. Reverse this procedure to install the WLAN module. 44 Chapter 4 Removal and replacement procedures - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 53
through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). Remove - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 54
7. Remove the optical drive bracket (2). Reverse this procedure to reassemble and install an optical drive. 46 Chapter 4 Removal and replacement procedures - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 55
operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). Remove the keyboard - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 56
from the top cover. 7. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and disconnect the keyboard cable (2) from the system board. 8. Remove the keyboard. Reverse this procedure to install the keyboard. 48 Chapter 4 Removal and replacement procedures - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 57
the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the keyboard (see Keyboard on page 47). Remove the switch cover: 1. Turn the computer upside down, with the rear panel - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 58
5. Disconnect the LED board cable (1) from the system board. 6. Remove the switch cover (2). Reverse this procedure to install the switch cover. 50 Chapter 4 Removal and replacement procedures - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 59
and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 42). 6. Remove the keyboard (see Keyboard on page 47). 7. Remove the switch cover (see Switch cover on page 49 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 60
6. Remove the WLAN antenna cables (2) from the opening in the system board. 7. Remove the four Phillips PM2.5×6.0 screws (1) that secure the display assembly to the computer. 8. Lift the display assembly (2) straight up and remove it. 52 Chapter 4 Removal and replacement procedures - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 61
9. If it is necessary to replace the display bezel or the display assembly internal components, remove the six rubber screw covers (1) and the six Torx T8M2.5×6.0 screws (2) that secure the display bezel to the display enclosure. 10. Flex the inside edges of the left and right sides (1) and the top - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 62
13. Disconnect the backlight cable (2) and the display panel cable (3) from the display inverter. 14. Remove the display inverter from the display enclosure. The display inverter is available using spare part number 454009-001. 15. If it is necessary to replace the display hinges, remove the six - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 63
then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 47) d. Switch cover (see Switch cover on - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 64
.0×3.0 screws. 3. Turn the computer right-side up, with the front toward you. 4. Disconnect the fingerprint reader board cable (1) from the system board. 5. Disconnect the TouchPad cable (2) from the system board. 6. Remove the two Phillips PM2.5×7.0 screws (3) and the two Phillips PM2.5×4.0 screws - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 65
7. Lift the rear edge of the top cover (1) and swing it (2) up and forward until it rests at an angle. 8. Lift the top cover (3) straight up and remove it. Reverse this procedure to install the top cover. Component replacement procedures 57 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 66
then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 47) d. Switch cover (see Switch cover on - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 67
2. Remove the RTC battery (2). Reverse this procedure to install the RTC battery. Component replacement procedures 59 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 68
then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 47) d. Switch cover (see Switch cover on - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 69
then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 47) d. Switch cover (see Switch cover on - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 70
on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 62 Chapter 4 Removal and - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 71
drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 47) d. Switch cover (see Switch cover on page 49) e. Display assembly (see Display assembly on page 51) f. Top cover (see Top cover on page 55) g. Bluetooth module (see Bluetooth module on page 61) Remove the speaker assembly - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 72
then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 47) d. Switch cover (see Switch cover on - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 73
then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 47) d. Switch cover (see Switch cover on - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 74
the captive standoff (2) on the fan that secures the system board to the base enclosure. 3. Flex the left side Use the optical drive connector (1) to lift the left side of the system board (2) until it rests at an angle. 5. Remove the system board (3) from the base enclosure by pulling it away at an - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 75
then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 47) d. Switch cover (see Switch cover on - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 76
PM2.0×6.0 screws that secure the ExpressCard assembly to the system board. 3. Turn the system board right-side up, with the left side toward you. 4. Remove the ExpressCard assembly from the system board. Reverse this procedure to install the ExpressCard assembly. 68 Chapter 4 Removal and replacement - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 77
then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 47) d. Switch cover (see Switch cover on - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 78
3. Disconnect the modem module (2) from the system board by lifting it straight up. 4. Remove the modem module and modem module cable. Reverse this procedure to install the modem module and modem module cable. 70 Chapter 4 Removal and replacement procedures - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 79
then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 47) d. Switch cover (see Switch cover on - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 80
by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 81
then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 47) d. Switch cover (see Switch cover on - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 82
the heat sink is removed. Thermal material is included with all system board, heat sink, and processor spare part kits, and is also available in the Thermal Material Kit, spare part number 445853-001. Reverse this procedure to install the heat sink. 74 Chapter 4 Removal and replacement procedures - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 83
then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 37). 5. Remove the following components: a. Hard drive (see Hard drive on page 38) b. Optical drive (see Optical drive on page 45) c. Keyboard (see Keyboard on page 47) d. Switch cover (see Switch cover on - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 84
locking screw (1) one-half turn counterclockwise until you hear a click. 2. Lift the processor (2) straight up and remove it. NOTE: When you install the processor, the gold triangle (3) on the processor must be aligned with the triangle (4) embossed on the processor slot. Reverse this procedure to - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 85
be used even when the operating system is not working or will not load. NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer. NOTE: Pointing devices are not supported in Computer Setup. You must use the keyboard to navigate and make selections. NOTE - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 86
, and System Configuration menus. 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. Because Computer Setup is not Windows-based, it does not support the TouchPad - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 87
the batteries in the system. ● View specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version. Replace the configuration settings in Computer Setup with the original factory settings. (Password settings and security settings are - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 88
Smart Card security TPM Embedded Security System IDs Disk Sanitizer Diagnostics menu Select Hard Drive Self-Test options Memory Check cards is supported only on computers with optional smart card readers. NOTE: You must have an administrator password to change this setting. Enable/disable support - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 89
off the LAN when not in use. ● Enable/disable SATA Native Mode. ● Enable/disable Dual Core CPU. ● Enable/disable Secondary Battery Fast Charge. ● Choose Bit-shift or LBA assisted HDD Translation Mode. ● Enable/disable Windows direct application launcher. ● Enable/disable HP Lockout. Computer - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 90
Device Radio. ● Enable/disable embedded Bluetooth® Device Radio. ● Enable/disable LAN/WLAN Switching. When enabled, switches to a WLAN when a LAN is either unavailable or disconnected. ● Enable/disable Wake on LAN from Off. ● Enable/disable the ambient light sensor. ● Enable/disable the serial port - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 91
6 Specifications Computer specifications Dimensions Length Width Height (front to rear) Weight Equipped with 8-cell battery and optical drive Equipped with 4-cell battery and optical drive Input power Operating voltage Operating current Temperature Operating (not writing to optical disc) Operating - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 92
thermal limits for plastic surfaces. The computer operates well within this range of temperatures. 12.1-inch, WXGA display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 93
temperature 5°C to 55°C (41°F to 131°F) *1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly. NOTE: Certain restrictions and exclusions apply. Contact technical support for details. Hard drive - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 94
DVD/CD-RW Combo Drive specifications Applicable disc Center hole diameter Disc diameter Standard disc Mini disc Disc thickness Track pitch Access time Random Full stroke Audio output level Cache buffer Data transfer rate 24X CD-ROM 8X DVD 24X CD-R 24X CD-RW Transfer mode Startup time Stop time - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 95
DVD-ROM Drive Applicable disc Center hole diameter Disc diameter Standard disc Mini disc Disc thickness Track pitch Access time Random Full stroke Audio output level Cache buffer Data transfer rate CD-R (24X) CD-RW (10X) CD-ROM (24X) DVD (8X) Multiword DMA mode 2 Startup time Stop - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 96
System DMA specifications Hardware DMA System function DMA0 Not applicable DMA1* Not applicable DMA2* Not applicable DMA3 Not applicable DMA4 Direct memory access controller DMA5* Available for PC Card DMA6 Not assigned DMA7 Not assigned *PC Card controller can use DMA 1, 2, or 5. - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 97
System interrupt specifications Hardware IRQ System function IRQ0 IRQ1 System timer Standard 101-/102-Key or Microsoft® Natural Keyboard IRQ2 Cascaded IRQ3 Intel 82801DB/DBM USB2 Enhanced Host Controller-24CD IRQ4 COM1 IRQ5* Conexant AC-Link Audio Intel 82801DB/DBM SMBus Controller-24C3 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 98
87334 "Super I/O" configuration for CPU Counter/timer registers Unused Keyboard controller Port B Unused Keyboard controller Unused NMI enable/RTC Unused DMA page registers Unused Port A Unused Interrupt controller no. 2 System Function (shipping configuration) Unused DMA controller no. 2 Unused - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 99
FM synthesizer-OPL3 Unused VGA Reserved (parallel port/no EPP support) VGA PC Card controller in CPU Unused Internal modem "A" diskette controller Serial port (COM1/default) PCI configuration index register (PCIDIVO-1) PCI configuration data register (PCIDIVO-1) System I/O address specifications 91 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 100
-00FFFFFF 04800000-07FFFFFF 04800000-07FFFFFF 08000000-080FFFFF 08200000-FFFEFFFF FFFF0000-FFFFFFFF System function Base memory Video memory Video BIOS Unused System BIOS Extended memory Super extended memory Unused Video memory (direct access) Unused System BIOS 92 Chapter 6 Specifications - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 101
7 Screw listing This section provides specification and reference information for the screws used in the computer. All screws listed in this section are available in the Screw Kit, spare part number - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 102
Where used: 4 screws that secure the display hinges to the display panel Where used: 2 screws that secure the Bluetooth module to the system board Where used: 3 screws that secure the fan to the heat sink 94 Chapter 7 Screw listing - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 103
4.5 mm Where used: (1) Four captive screws that secure the hard drive cover to the computer (2) Two captive screws that secures the memory module compartment cover to the computer (3) One captive screw that secures the WLAN module compartment cover to the computer Phillips PM2.0×5.0 captive screw - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 104
Phillips PM2.5×12.0 captive screw Color Silver Quantity 1 Length 12.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: One captive screw that secures the hard drive to the computer 96 Chapter 7 Screw listing - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 105
Phillips PM3.0×4.0 screw Color Silver Quantity 4 Length 4.0 mm Thread 3.0 mm Head diameter 5.0 mm Where used: 4 screws that secure the hard drive bracket to the hard drive Phillips PM3.0×4.0 screw 97 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 106
Phillips PM2.5×4.0 screw Color Black Quantity 6 Length 4.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: 2 screws that secure the WLAN module to the system board 98 Chapter 7 Screw listing - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 107
Where used: 2 screws that secure the top cover to the base enclosure Where used: 2 screws that secure the modem module to the system board Phillips PM2.5×4.0 screw 99 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 108
14 Length 7.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: (1) One screw that secures the optical drive to the computer (2) Three screws that secure the switch cover to the computer (3) One screw that secures the display assembly to the computer 100 Chapter 7 Screw listing - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 109
Where used: 7 screws that secure the top cover to the base enclosure Where used: 2 screws that secure the top cover to the base enclosure Phillips PM2.5×7.0 screw 101 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 110
Phillips PM2.5×7.0 captive screw Color Black Quantity 3 Length 7.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: 3 captive screws that secure the keyboard to the computer 102 Chapter 7 Screw listing - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 111
Phillips PM2.0×3.0 screw Color Silver Quantity 10 Length 3.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used: 5 screws that secure the switch cover to the computer Where used: 3 screws that secure the top cover to the base enclosure Phillips PM2.0×3.0 screw 103 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 112
Where used: 2 screws that secure the front LED board to the base enclosure 104 Chapter 7 Screw listing - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 113
Phillips PM2.5×5.0 screw Color Black Quantity 5 Length 5.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: One screw that secures the display assembly to the computer Phillips PM2.5×5.0 screw 105 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 114
Where used: 4 screws that secure the display assembly to the computer Torx T8M2.5×6.0 screw Color Black Quantity 6 Length 6.0 mm Thread 2.5 mm Heat diameter 5.0 mm Where used: 6 screws that secure the display bezel to the display assembly 106 Chapter 7 Screw listing - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 115
Torx T8M2.5×5.0 screw Color Black Quantity 6 Length 5.0 mm Thread 2.5mm Head diameter 5.0 mm Where used: 6 screws that secure the display panel to the display enclosure Torx T8M2.5×5.0 screw 107 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 116
Phillips PM2.5×6.0 screw Color Black Quantity 3 Length 6.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: 3 screws that secure the system board to the base enclosure 108 Chapter 7 Screw listing - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 117
Phillips PM2.0×6.0 screw Color Silver Quantity 4 Length 6.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used: 4 screws that secure the ExpressCard assembly to the system board Phillips PM2.0×6.0 screw 109 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 118
Phillips PM2.0×6.0 shoulder screw Color Silver Quantity 2 Length 6.0 mm Thread 2.0 mm Head diameter 5.0 mm Where used: 2 shoulder screws that secure the heat sink to the system board 110 Chapter 7 Screw listing - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 119
Follow the on-screen instructions. Backing up your information NOTE: You can only recover files that you have previously backed up. HP recommends that you use HP Backup & Recovery Manager to create an entire drive backup as soon as you set up your computer. Backup and recovery in Windows Vista 111 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 120
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings. The screen shot can Drivers, utilities, and software installed by HP can be copied to a CD or to a DVD using HP Backup & Recovery Manager. Backing up specific files or folders You can back up specific - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 121
and folders, and then click Next. 5. Follow the on-screen instructions. Backing up the entire hard drive When you perform a complete backup of the hard drive, you are saving the full factory image, including the Windows® operating system, software, and all personal files and folders. NOTE: A copy - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 122
click Next. 4. Click Create or manage Recovery Points, and then click Next. 5. Follow the on-screen instructions. Scheduling backups Use HP Backup Scheduler to schedule backups for the entire system, for recovery points, or for specific files and folders. With this tool, you can schedule backups at - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 123
recovery disc into the optical drive and restart the computer. 3. Follow the on-screen instructions. Performing a recovery from the hard drive There are 2 ways to initiate a recovery from the hard drive: ● From within Windows ● From the recovery partition Backup and recovery in Windows Vista 115 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 124
from the hard drive recovery partition, follow these steps: 1. Back up all personal files. 2. Restart the computer, and then press f11 before the Windows operating system loads. 3. Click a recovery option, and then click Next. 4. Follow the on-screen instructions. 116 Chapter 8 Backup and recovery - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 125
create a set of recovery discs: 1. Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery Manager. 2. Click Next. 3. Click Create factory software recovery CDs or DVDs to recover the system (Highly recommended), and then click Next. 4. Follow the on-screen instructions. Backing - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 126
take several minutes, depending on the file size and the speed of the computer. To back up specific files or folders: 1. Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery Manager. 2. Click Next. 3. Click Back up to protect system settings and important data files, and then - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 127
> HP Backup & Recovery > HP Backup and Recovery Manager. 2. Click Next. 3. Click Back up to protect system settings and important data files, and then click Next. 4. Click Back up entire hard drive, and then click Next. 5. Follow the on-screen instructions. Backup and recovery in Windows XP 119 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 128
system settings and important data files, and then click Next. 4. Click Create or manage Recovery Points, and then click Next. 5. Follow the on-screen instructions. Scheduling backups Use HP Backup Scheduler to schedule backups for the entire system, for recovery points, or for specific files - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 129
discs, follow these steps: 1. Back up all personal files. 2. Insert the first recovery disc into the optical drive and restart the computer. 3. Follow the on-screen instructions. Performing a recovery from the hard drive There are 2 ways to initiate a recovery from the hard drive: ● From within - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 130
recovery in Windows, follow these steps: 1. Back up all personal files. 2. Select Start > All Programs > HP Backup & Recovery > HP Backup and Recovery Manager. 3. Click Next. 4. Click Recover important files or the entire system, and then click Next. 5. Follow the on-screen instructions. Initiating - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 131
9 Connector pin assignments Audio-out (headphone) Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3 Ground Audio-in (microphone) Pin Signal 1 Audio signal in 2 Audio signal in 3 Ground Audio-out (headphone) 123 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 132
External monitor Pin Signal 1 Red analog 2 Green analog 3 Blue analog 4 Not connected 5 Ground 6 Ground analog 7 Ground analog 8 Ground analog 9 +5 VDC 10 Ground 11 Monitor detect 12 DDC 2B data 13 Horizontal sync 14 Vertical sync 15 DDC 2B clock 124 Chapter 9 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 133
RJ-11 (modem) Pin Signal 1 Unused 2 Tip 3 Ring 4 Unused 5 Unused 6 Unused RJ-11 (modem) 125 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 134
RJ-45 (network) Pin Signal 1 Transmit + 2 Transmit - 3 Receive + 4 Unused 5 Unused 6 Receive - 7 Unused 8 Unused 126 Chapter 9 Connector pin assignments - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 135
S-Video-out Pin 1 2 3 4 5 6 7 Signal S-VHS color (C) signal Composite video signal S-VHS intensity (Y) signal S-VHS color ground TV-CD S-VHS intensity ground Composite video ground S-Video-out 127 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 136
Universal Serial Bus Pin Signal 1 +5 VDC 2 Data - 3 Data + 4 Ground 128 Chapter 9 Connector pin assignments - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 137
for evaluation in the country or region where the power cord set will be used. ● The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage rating of 125 or 250 V AC, as required by the power system of each country or region. ● The appliance coupler must meet the - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 138
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia 5. The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 139
components, handle them carefully. NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly instructions. Specific details, such as screw sizes, quantities, and locations, and component shapes and sizes, can vary from one computer model to another. Battery - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 140
Perform the following steps to disassemble the display assembly: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. 2. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 141
4. Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). 5. Remove all screws (1) that secure the display panel assembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclosure. 7. Turn the display panel assembly upside - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 142
10. Remove the display panel frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlight cover (2) and swing it outward. 13. Remove the backlight cover. 14. Turn the display panel right-side up. 134 Chapter - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 143
15. Remove the backlight cables (1) from the clip (2) in the display panel. 16. Turn the display panel upside down. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. 17. Remove the - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 144
18. Remove the backlight from the backlight frame. 19. Disconnect the display panel cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display rear panel. 21. Release the LCD panel (3) from the display rear panel. 22. Release the tape (4) that secures the LCD - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 145
mute 7 wireless 7 C Cable Kit contents 21 spare part number 20, 21, 27 cables, service considerations 30 chipset, product description 1 CMOS clearing 34 components bottom 14 buttons 7 display 5 fingerprint reader 7 front 11 keys 8 left-side 12 lights 9 pointing devices 6 right-side 13 switch 7 top - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 146
27, 55 HP Fingerprint Sensor 8 I I/O address specifications 90 info button 7 interrupt specifications 89 inverter removal 53 spare part number 27 J jacks audio-in 11 audio-out 11 headphone 11 microphone 11 modem 12 network 12 RJ-11 12 RJ-45 12 S-Video-out jack 13 K keyboard product description - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 147
12 power cord set requirements 129 Ethernet 2 external media cards 3 graphics 1 hard drives 2 keyboard 3 memory module 1 microphone 2 modem module 2 operating system 3 optical drives 2 pointing devices 3 ports 3 power requirements 3 processors 1 product name 1 security 3 serviceability 4 wireless - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 148
considerations 29 serviceability, product description 4 smart card security 80 speaker assembly removal 62 spare part number 17, 62 speakers spare part number 28 specifications computer 83 display 84 DVD-ROM Drive 87 DVD/CD-RW Combo Drive 86 hard drive 85 I/O addresses 90 interrupts 89 memory map 92 - Compaq 2210b | HP Compaq 2210b Notebook PC - Maintenance and Service Guide - Page 149
HP Compaq 2210b Notebook PC
Maintenance and Service Guide