Compaq 230039-001 Installation Guide for the e7000 v1 - Technical White Paper
Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Manual
View all Compaq 230039-001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 230039-001 manual content summary:
- Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 1
configure a StorageWorks NAS e7000 v1. This guide uses Quick Restore version 2.01 for the e7000. The purpose of this document is to guide customers and field engineers in the procedures required to install NAS distribution software and then update the system with current service packs, hotfixes, and - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 2
] Creating a SWVR Pool through the WEBUI 26 Creating Cluster Virtual Servers and Cluster aware file share resources. 26 Creating a Virtual Server with the WEBUI 27 Creating a Virtual Server with Terminal Services 27 Creating Cluster File Share Resources with the WEBUI 28 Creating Cluster - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 3
the NAS e7000. 3. Power on the Windows-based PC and wait until the operating system has completely loaded. 4. Insert the RapidLaunch CD into the CD-ROM drive. 5. The RapidLaunch CD should automatically run. If the program does not startup automatically, the program may be run manually. Click Start - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 4
StorageWorks NAS device. 10. Follow the instructions on the screen to input the correct information. Verify that your information is correct when the configuration review screen is displayed. 11. Click the Online icon to save the network information to the NAS e7000. 12. Click the Finish icon to - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 5
hp.com/support/files/server/us/download/14994.html Download and install the Compaq StorageWorks NAS Services For Unix version 2.3 and WebUI update from the following link: http://h18006.www1.hp.com/support/files uninstall problem from the following link: http://h18006.www1.hp.com/support/files/server - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 6
displayed when the WEBUI is opened. Rapid Startup will allow for the configuration of all network adapters and the Remote Insight . The e7000v1 supports EVA, MA and driver is 54.81a9 and the firmware is 3.82a1 2. Run the SAN Connection Tool and select MA with ACS 8.5 or 8.6 3. Follow the instructions - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 7
HBA driver is 54.81a9 and the firmware is 3.82a1 2. Download and install the Compaq StorageWorks NAS Executor e7000 and Enterprise Virtual Array Integration Kit from the following location. This softpaq will provide support for connecting to an EVA. a. http://h18023.www1.hp.com/support/files/server - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 8
that the HBA driver is 54.81a9 and the firmware is 3.90a7 2. When the StorageWorks NAS v1 software was published, XP array compatibility software was not available Open regedit and navigate to the following key i. Hkey_Local_Machine\Software\Compaq\StorageworksNas ii. Set OCU=1 iii. Set PRSstate=3 - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 9
Cluster Services". It is assumed that Quick Restore v2.01 for the e7000 has been used. The only patch required is the Compaq SANworks Virtual Replicator Update. (SoftPaq 2829) http://h18006.www1.hp.com/support/files/server/us/download/16247.html Installation Instructions for stand-alone systems - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 10
one or more times during this installation, print this guide, or copy it elsewhere and view it on a separate system. Checklists for Cluster Server Installation This checklist assists in preparing for installation. Step-by-step instructions begin after the checklist. Network Requirements: • A unique - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 11
both nodes at the same time until Cluster Services has been installed on at least one node. is not yet protected by the cluster software. Use Table 1 below to determine To configure the Cluster service on the StorageWorks NAS until the Cluster service is installed on at least one - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 12
and add the following Dword value: o HKEY_LOCAL _MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters o Value Name: DisableDHCPMediaSense o Data Type: Reg_Dword o Data: 1 WARNING : Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 13
assigned lease address remains valid even if the DHCP service is temporarily lost. In all cases, set static IP addresses for the private The quorum disk is used to store cluster configuration database checkpoints and log files that help manage the cluster. The quorum disk must be a shared disk - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 14
Next. 5. When prompted for files on the Windows Powered OS CD or the Windows 2000 SP3 cd, browse to the directory C:\Compaq\Windows Components\i386. 6. The window shown in Figure 7 below appears. Click I Understand to accept the condition that the Cluster service is supported on hardware from the - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 15
[Enter your Document Title] [Document Restriction Notice] Figure 7. Hardware Configuration Certification Screen 7. Because this is the first node in the cluster, the cluster must be created. Select the first node in the cluster, as shown in Figure 8 below and then click Next. 14 - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 16
: By default, all SCSI disks not residing on the same bus as the system disk will appear in the Managed Disks list. Therefore, if the node has box shown in Figure 9 specifies which shared disks will be used by Cluster service. Add or remove disks as necessary and then click Next. Figure 9. Add - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 17
networks are in use. It shows how to configure these networks as one mixed and one private network. The order in which the Cluster Service Configuration Wizard presents these networks may vary. In this example, the public network is presented first. 12. Click Next in the Configuring Cluster Networks - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 18
[Enter your Document Title] [Document Restriction Notice] Figure 10. Public Network Connection 17. The next dialog box shown in Figure 11 configures the private network. Make sure that the network name and IP address correspond to the network interface used for the private network. 18. Check the - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 19
operating conditions this connection will be used for cluster communication. In case of a failure in the Private Cluster Connection, the cluster service will automatically switch to the next network on the list-in this case Public Cluster Connection. Make sure the first connection in the list is - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 20
process for the first Node By copying the files needed to complete the installation of Cluster service. After the files are copied, the Cluster service registry entries are created, the log files on the quorum resource are created, and the Cluster service is started on the first node. A dialog box - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 21
begins exactly as it did for Node A. During installation of Node B, Node A must be running. Follow the same procedures used for installing the Cluster service on Node A, with the following differences: 1. In the Create or Join a Cluster dialog box, select The second or next node in the cluster, and - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 22
the next dialog box, click Finish to complete configuration. 6. The Cluster service will start. Click OK. 7. Close Add/Remove Programs. Verify Installation resources will be brought online on the other node. This shift will display on the screen. Close the Cluster Administrator snap-in. 3. If this - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 23
[Enter your Document Title] [Document Restriction Notice] Congratulations. This completes the installation of the Cluster service on both nodes. The server cluster is fully operational. 22 - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 24
Virtual Replicator and Services For UNIX software must be updated. If the e7000 is not being installed as part of a e7000 cluster, please skip the process is complete select NEXT. 12. Depending on the version of the system image an upgrade of StorageWorks NAS Data Copy may also be necessary. Select - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 25
the installation is confirmed download and install the following patch: Compaq SANworks Virtual Replicator Update. (SoftPaq 2829) http://h18006.www1.hp.com/support/files/server/us/download/16247.html Installation Instructions for clustered systems: 1. Migrate all resources to a single node of the - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 26
Title] 20. Shutdown and restart the system. 21. Repeat steps 1-20 on the second node [Document Restriction Notice] Note: Do not install the SWVR patch 1, SWRV patch 2 or the Compaq StorageWorks Virtual Replicator Service Patch 116B. They are all installed with the image. (e7000 v2.01) 25 - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 27
file share resources. [Document Restriction Notice] StorageWorks NAS utilizes a software located in the Administration Guide for the respective product. not be accomplished through terminal services; it must be done locally % is the snapshot reserve. Select the driver letter and specify if it is to - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 28
the parameters and select FINISH to create the resource. Creating a Virtual Server with Terminal Services Open Cluster administrator. Cluster administrator can be opened by selecting Start->Run>cluadmin • Select FILE->NEW->GROUP • Type the name for the new group and enter a description if desired - Compaq 230039-001 | Installation Guide for the e7000 v1 - Technical White Paper - Page 29
hosts them. Select NEXT. • Specify the parameters for the file share and select NEXT. • Verify the parameters and select FINISH to create the resource. Creating Cluster File Share Resources with Terminal Services In a cluster configuration file shares must be created in cluster administrator to be
Installation guide for the e7000 v1
This guide will provide the steps necessary to install and configure a StorageWorks NAS
e7000 v1. This guide uses Quick Restore version 2.01 for the e7000. The purpose of this
document is to guide customers and field engineers in the procedures required to install
NAS distribution software and then update the system with current service packs, hotfixes,
and SoftPaqs relevant to the StorageWorks NAS products.
This guide is for new
installations only, and does not contain steps for migrating data from an existing
installation.
table of contents
March, 2003
hp storage
technical
white paper
Introduction
2
Quick Restore
2
Rapid Launch
2
Configuring and Updating the System
4
Rapid Startup
5
SAN Connection Tool
5
Connecting to MA with ACS 8.5 or 8.6
5
Connecting to a MA with ACS 8.7
5
Connecting to an Enterprise Virtual Array with VCS 1.x
6
Connecting to an EVA with VCS 2.x
6
Connecting to an XP array
7
Patching SWVR in a non-clustered architecture
8
Installing Cluster Services
9
Checklists for Cluster Server Installation
9
Shared Disk Requirements:
9
Installation Overview
10
Setting up Networks
10
Configure the Public Network Adapter
12
Install the Cluster Service Software and Configuring the Node A
13
Validating the Cluster Installation
19
Configuring the Node B
20
Verify Installation
21
Upgrading SWVR and SFU to be cluster aware
23
Creating Pools and Virtual Disks
26
1