Compaq 230050-001 Installation Guide for the b3000 v1 - Technical White Paper
Compaq 230050-001 - StorageWorks NAS B3000 Model N900 Server Manual
 |
UPC - 720591699352
View all Compaq 230050-001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 230050-001 manual content summary:
- Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 1
b3000 v1. This guide uses Quick Restore version 2.12 for the b3000. The purpose of this document is to guide customers and field engineers in the procedures required to install NAS distribution software and then update the system with current service and Cluster aware file share resources. Creating - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 2
[Enter your Document Title] [Document Restriction Notice] Creating a Virtual Server with Terminal Services 26 Creating Cluster File Share Resources with the WEBUI 27 Creating Cluster File Share Resources with Terminal Services 27 2 - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 3
in the Administration guides for the respective products. The NAS b3000 v1 Quick Restore CD second CD, insert the second CD. If the b3000 being installed is part of a cluster, save time by placing CD 1 are available and supported by the NAS device if used. To initialize the NAS b3000 using the - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 4
You may refresh the device list manually by selecting the Refresh button. instructions on the screen to input the correct information. Verify that your information is correct when the configuration review screen is displayed. 11. Click the Online icon to save the network information to the NAS b3000 - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 5
h18006.www1.hp.com/support/files/server/us/download/14994.html Download and install the Compaq StorageWorks NAS Services For Unix version 2.3 StorageWorks NAS Data Copy fix for uninstall problem from the following link: http://h18006.www1.hp.com/support/files/server/us/download/17535.html Install SP3 - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 6
[Enter your Document Title] [Document Restriction Notice] NOTE: Make sure to run the Rapid Startup Utility on both nodes before continuing 5 - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 7
. If the b3000 is to be clustered skip to the next section entitled "Installing Cluster Services". The only patch required is the Compaq SANworks Virtual Replicator Update. (SoftPaq 2829) http://h18006.www1.hp.com/support/files/server/us/download/16247.html Installation Instructions for stand-alone - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 8
VRRegMon.exe to VRRegMon.exe.bak. 17. Copy the file "C:\CP002829\Sdapi.dll to the directory "C:\Program Files\Compaq\SANWorks Virtual Replicator 2.5." 18. Copy the file "C:\CP002829\VRRegMon.exe to the directory "C:\Program Files\Compaq\SANWorks Virtual Replicator 2.5." 19. Restart the system. 7 - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 9
services. If the b3000 is not to be part of a cluster, skip this section. It is possible to configure cluster services side labeled Cluster Setup Tool. Follow the instructions in the Cluster Setup Tool to configure the times during this installation, print this guide, or copy it elsewhere and view - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 10
let the shared disk be accessed by both nodes at the same time until Cluster Services has been installed on at least one node. • All shared disks must be Table 1. Power Sequencing for Cluster Installation To configure the Cluster service on the StorageWorks NAS server, the login account must have - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 11
Services\Tcpip\Parameters o Value Name: DisableDHCPMediaSense o Data Type: Reg_Dword o Data: 1 WARNING : Using Registry Editor incorrectly can cause serious problems in Windows 2000, see Microsoft Knowledge Base Article Q322755: http://support.microsoft.com/default.aspx?scid=kb;EN-US;q322755 Note: If - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 12
(http://support.microsoft.com/support/kb/articles/Q242/4/30.ASP) should be followed and the node rebooted prior to installing the Cluster service. If quorum disk is used to store cluster configuration database checkpoints and log files that help manage the cluster. The quorum disk must be a shared - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 13
Next. 5. When prompted for files on the Windows Powered OS CD or the Windows 2000 SP3 cd, browse to the directory C:\Compaq\Windows Components\i386. 6. The window shown in Figure 7 below appears. Click I Understand to accept the condition that the Cluster service is supported on hardware from the - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 14
[Enter your Document Title] [Document Restriction Notice] Figure 7. Hardware Configuration Certification Screen 7. Because this is the first node in the cluster, the cluster must be created. Select the first node in the cluster, as shown in Figure 8 below and then click Next. 13 - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 15
the Managed Disks list. 11. The Add or Remove Managed Disks dialog box shown in Figure 9 specifies which shared disks will be used by Cluster service. Add or remove disks as necessary and then click Next. Figure 9. Add or Remove Managed Disks The first partition of the first disk is selected - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 16
nodes and other connections through a public network. If you have more than one private network, make sure that each uses a different subnet, as Cluster service recognizes only one network interface per subnet. This document is built on the assumption that only two networks are in use. It shows how - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 17
[Enter your Document Title] [Document Restriction Notice] Figure 10. Public Network Connection 17. The next dialog box shown in Figure 11 configures the private network. Make sure that the network name and IP address correspond to the network interface used for the private network. 18. Check the - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 18
top of the list. In normal operation this connection will be used for cluster communication. In case of the Private Cluster Connection failure, cluster service will automatically switch to the next network on the list-in this case Public Cluster Connection. Make sure the first connection in the list - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 19
process for the first node by copying the files needed to complete the installation of Cluster service. After the files are copied, the Cluster service registry entries are created, the log files on the quorum resource are created, and the Cluster service is started on the first node. A dialog box - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 20
as for the first node. During installation of the second node, the first node must be running. Follow the same procedures used for installing Cluster service on the first node, with the following differences: 1. In the Create or Join a Cluster dialog box, select The second or next node in the - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 21
Enter the password for the account (if there is one) and click Next. 5. At the next dialog box, click Finish to complete configuration. 6. The Cluster service will start. Click OK. 7. Close Add/Remove Programs. Verify Installation There are several ways to verify a successful installation of Cluster - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 22
[Enter your Document Title] [Document Restriction Notice] Congratulations. You have completed the installation of Cluster service on both nodes. The server cluster is fully operational. 21 - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 23
and SFU to be cluster aware [Document Restriction Notice] For cluster configurations, the Virtual Replicator and Services For UNIX software must be updated. If the b3000 is not being installed as part of a b3000 cluster, please skip this section. If the Cluster Setup Tool was not used for cluster - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 24
• Open services and confirm that the Virtual Replicator Registry Cleanup Tool Service is installed and started. • If this service is not installed Compaq SANworks Virtual Replicator Update. (SoftPaq 2829) http://h18006.www1.hp.com/support/files/server/us/download/16247.html Installation Instructions - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 25
Document Title] Files\Compaq\SANWorks Virtual Replicator 2.5." 20. Shutdown and restart the system. 21. Repeat steps 1-20 on the second node [Document Restriction Notice] Note: Do not install the SWVR patch 1, SWVR patch 2 or the Compaq StorageWorks Virtual Replicator Service Patch 116B. They - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 26
SWVR can be located in the Administration Guide for the respective product. Creating a SWVR . This can not be accomplished through terminal services; it must be done locally at the • An IP Address resource. • The physical disks and file shares to be accessed by the clients of the virtual server - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 27
the parameters and select FINISH to create the resource. Creating a Virtual Server with Terminal Services Open Cluster administrator. Cluster administrator can be opened by selecting Start->Run>cluadmin • Select FILE->NEW->GROUP • Type the name for the new group and enter a description if desired - Compaq 230050-001 | Installation Guide for the b3000 v1 - Technical White Paper - Page 28
hosts them. Select NEXT. • Specify the parameters for the file share and select NEXT. • Verify the parameters and select FINISH to create the resource. Creating Cluster File Share Resources with Terminal Services In a cluster configuration file shares must be created in cluster administrator to be
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
Installation guide for the b3000 v1
This guide will provide the steps necessary to install and configure a StorageWorks NAS
b3000 v1. This guide uses Quick Restore version 2.12 for the b3000. The purpose of this
document is to guide customers and field engineers in the procedures required to install
NAS distribution software and then update the system with current service packs, hotfixes,
and SoftPaqs relevant to the StorageWorks NAS products.
This guide is for new
installations only, and does not contain steps for migrating data from an existing
installation.
table of contents
March, 2003
hp storage
technical
white paper
Introduction
2
Quick Restore
2
Rapid Launch
2
Configuring and Updating the System
4
Rapid Startup
4
SAN Connection Tool
6
Connecting to MSA1000
6
Patching SWVR in a non-clustered architecture
6
Installing Cluster Services
8
Checklists for Cluster Server Installation
8
Shared Disk Requirements:
8
Installation Overview
9
Setting up Networks
9
Configure the Public Network Adapter
11
Install Cluster Service Software
12
Configuring the First Node
12
Validating the Cluster Installation
18
Configuring the Second Node
19
Verify Installation
20
Upgrading SWVR and SFU to be cluster aware
22
Creating Pools and Virtual Disks
25
Creating a SWVR Pool through the WEBUI
25
Creating Cluster Virtual Servers and Cluster aware file share resources.
25
Creating a Virtual Server with the WEBUI
26
1