Compaq 245161-B22 110V/220V Light Rack Option Kit Installation Instructions
Compaq 245161-B22 - 10642 42U Rack Shock Pallet Manual
UPC - 720591208066
View all Compaq 245161-B22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 245161-B22 manual content summary:
- Compaq 245161-B22 | 110V/220V Light Rack Option Kit Installation Instructions - Page 1
Instructions © Copyright 2004, 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services this product, read the Important Safety Information guide provided. WARNING: To reduce the risk of - Compaq 245161-B22 | 110V/220V Light Rack Option Kit Installation Instructions - Page 2
Kit 1. Remove the fluorescent lamp cover. 4. Replace the fluorescent lamp cover. 2. Insert two screws, securing the HP 110V/220V Light Rack Option Kit to the rack frame. Operating the HP 110V/220V Light Rack Option Kit Item 3. Insert the fluorescent lamp pins into the light socket (1) and - Compaq 245161-B22 | 110V/220V Light Rack Option Kit Installation Instructions - Page 3
Option Kit WARNING: To reduce the risk of personal injury, fire, or damage to the equipment, do not overload the HP 110V/220V Light Rack Option Kit. HP 110V/220V Light Rack Option Kit Specifications Parameter Height Depth Width Weight Rated input Maximum rated output Illuminant Protection class - Compaq 245161-B22 | 110V/220V Light Rack Option Kit Installation Instructions - Page 4
FD-14/65/1AK E-G13-26/360 n/a not for general lighting purposes * At 50-Hz operation, lamp aged for 100 h. Material disposal This HP product contains the following material that might require special handling at end-of-life: • Mercury in the user replaceable fluorescent lamp. Disposal of mercury
HP 110V/220V Light Rack
Option Kit
Installation Instructions
About this device
The HP 110V/220V Light Rack Option Kit enables you to add a
light to the rack.
Kit Contents
The items required for installation include:
•
110V/220V light unit (with cover)
•
F14W/133-T8 fluorescent lamp
•
Power cord (10 ft), C13-C14
•
Screws
Required Tool
You will need a flat-head screwdriver.
Important Safety Information
Before installing this product, read the
Important
Safety Information
guide provided.
WARNING:
To reduce the risk of personal injury, fire, or
damage to the equipment, do not overload the HP
110V/220V Light Rack Option Kit.
WARNING:
The fluorescent lamp contains mercury.
Therefore, at end-of-life, the fluorescent lamp may require
special handling.
WARNING:
To reduce the risk of personal injury or
damage to the equipment, be sure that:
•
The leveling feet are extended to the floor.
•
The full weight of the rack rests on the leveling feet.
•
The stabilizing feet are attached to the rack if it is a
single-rack installation.
•
The racks are coupled together in multiple-rack
installations.
•
Only one component is extended at a time. A rack
may become unstable if more than one component is
extended for any reason.
© Copyright 2004, 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Part Number 365456-002
August 2007 (Second Edition)