Compaq 245161-B22 cable management d-ring rack option kit installation instruc

HP CONFIDENTIAL Writer: Amy L. Laffitte Codename:Ridgeback Part Number: 313468-021 Last Saved On: 10/10/02 1:48 PM

hp cable

management d-ring

rack option kit

installation instructions

Read instructions completely before beginning

installation procedure.

Hewlett-Packard Company shall not be liable for technical or editorial errors or

omissions contained herein. The information in this document is provided “as is”

without warranty of any kind and is subject to change without notice. The warranties

for HP products are set forth in the express limited warranty statements

accompanying such products. Nothing herein should be construed as constituting an

additional warranty.

hp cable management d-ring rack option kit installation instructions

First Edition (December 2002)

Part Number 313468-021

313468- 021

About This Device

The HP Cable Management D-Ring Rack Option Kit is designed

for use with all HP Series racks to assist with cable management.

Kit Contents

The items and quantities required for installation include:

•

Cable management d-ring (10)

•

Cable management clip (10)

•

5.5-mm (.22 inches) thread-forming screw (10)

This kit may contain extra pieces of hardware for your

convenience.

Tool Required

You will need a Phillips screwdriver.

Additional Hardware

You will need the following components from the original rack

hardware kit:

•

M-6 screws

•

M-6 cage nuts

•

Cage nut insertion tool

Rack Considerations

Before beginning these procedures, be sure you understand and

follow these precautions:

WARNING:

To reduce the risk of personal injury or damage to

the equipment be sure that:

•

The leveling jacks are extended to the floor.

•

The full weight of the rack rests on the leveling jacks.

•

The stabilizing feet are attached to the rack if it is a

single-rack installation.

•

The racks are coupled in multiple-rack installations.

•

Only one component is extended at a time. A rack may

become unstable if more than one component is extended

for any reason.