Compaq 245161-B22 HP Ground Bonding Rack Option Kit Installation Guide
Compaq 245161-B22 - 10642 42U Rack Shock Pallet Manual
 |
UPC - 720591208066
View all Compaq 245161-B22 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 245161-B22 manual content summary:
- Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 1
HP Ground Bonding Rack Option Kit Installation Guide August 2006 (Second Edition) Part Number 391313-002 - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 3
Kit In this section About this device...3 Installing the ground bonding rack option kit on HP 10000 G2 Series Racks 4 Installing the ground bonding rack option kit on HP 10000 Series Racks 13 About this device The HP Ground Bonding Rack Option Kit can be used to reduce the level of electromagnetic - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 4
a time. A rack may become unstable if more than one component is extended for any reason. Installing the ground bonding rack option kit on HP 10000 G2 Series Racks Attach the appropriate grounding straps to the following locations: From the system chassis to the front door (without a grounding lug - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 5
: 1. Insert a T-25 Torx screw through the end of a 36.83-cm (14.5-in) grounding strap, and secure it to the system chassis rail. Installing the HP Ground Bonding Rack Option Kit 5 - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 6
left rear door and tighten. 3. Place the other end of the same grounding strap over the grounding lug on the cable access panel. Installing the HP Ground Bonding Rack Option Kit 6 - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 7
on the rack top and tighten. 3. Place the other end of the same grounding strap over the grounding lug on the perforated panel. Installing the HP Ground Bonding Rack Option Kit 7 - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 8
slot. 4. Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the egress slot and tighten. Installing the HP Ground Bonding Rack Option Kit 8 - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 9
) M8 hex nut M8 Belleville toothed washer Facility ground (not included with this kit) M8 x 20 bolt Installing the ground bonding rack option kit on HP 10000 G2 Series Rack side panels From the middle system chassis rail to the bottom side panel: 1. Connect a 36.83-cm (14.5-in) and a 15 - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 10
system chassis rail. 3. Place the end of the 15.24-cm (6-in) grounding strap over the grounding lug on the top side panel. Installing the HP Ground Bonding Rack Option Kit 10 - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 11
lug on the top side panel and tighten. 5. Repeat steps 1 through 4 for the other top side panel. Installing the ground bonding rack option kit on HP 10000 G2 Series Rack fan kits From the grounding lug on the rack top to the grounding lug on the fan kit: 1. Place one end - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 12
lock washer and an M8 hex nut over the grounding lug on the egress slot and tighten. Installing the ground bonding rack option kit on HP 10000 G2 Series Rack extension kits 1. Insert a T-25 Torx screw through one end of a 15.24-cm (6-in) grounding strap, and secure it to the - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 13
Installing the ground bonding rack option kit on HP 10000 Series Racks Attach the appropriate grounding straps to the following locations: From the system chassis rail to of the same grounding strap over the grounding lug on the right rear door. Installing the HP Ground Bonding Rack Option Kit 13 - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 14
left rear door and tighten. 3. Place the other end of the same grounding strap over the grounding lug on the cable access panel. Installing the HP Ground Bonding Rack Option Kit 14 - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 15
on the rack top and tighten. 3. Place the other end of the same grounding strap over the grounding lug on the perforated panel. Installing the HP Ground Bonding Rack Option Kit 15 - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 16
slot. 4. Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the egress slot and tighten. Installing the HP Ground Bonding Rack Option Kit 16 - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 17
) M8 hex nut M8 Belleville toothed washer Facility ground (not included with this kit) M8 x 20 bolt Installing the ground bonding rack option kit on HP 10000 Series Rack side panels From the system chassis rail to the side panel: 1. Connect a 36.83-cm (14.5-in) and a 15.24-cm (6-in - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 18
steps 1 through 4 for the other side panel. Installing the ground bonding rack option kit on HP 10000 Series Rack fan kits From the grounding lug on the rack top to the grounding lug on M8 hex nut over the grounding lug on the fan kit and tighten. Installing the HP Ground Bonding Rack Option Kit 18 - Compaq 245161-B22 | HP Ground Bonding Rack Option Kit Installation Guide - Page 19
3. Place the other end of the same grounding strap over the grounding lug on the egress slot. 4. Place an M8 internal serrated lock washer and an M8 hex nut over the grounding lug on the egress slot and tighten. Installing the HP Ground Bonding Rack Option Kit 19
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
 |
 |
HP Ground Bonding Rack Option Kit
Installation Guide
August 2006 (Second Edition)
Part Number 391313-002