Compaq 2510p External Devices - Windows XP
Compaq 2510p - Notebook PC Manual
View all Compaq 2510p manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 2510p manual content summary:
- Compaq 2510p | External Devices - Windows XP - Page 1
External Devices User Guide - Compaq 2510p | External Devices - Windows XP - Page 2
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: May 2007 Document Part Number: 440552-001 - Compaq 2510p | External Devices - Windows XP - Page 3
Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. ENWW iii - Compaq 2510p | External Devices - Windows XP - Page 4
iv Product notice ENWW - Compaq 2510p | External Devices - Windows XP - Page 5
Table of contents 1 Using a USB device Connecting a USB device ...2 Stopping and removing a USB device 2 Using USB legacy support ...3 2 Using a 1394 device Connecting a 1394 device ...5 Stopping and removing a 1394 device 5 3 Using the docking connector Index ...7 ENWW v - Compaq 2510p | External Devices - Windows XP - Page 6
vi ENWW - Compaq 2510p | External Devices - Windows XP - Page 7
can be connected to the computer or an optional docking device. Some USB devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions. The computer has two USB ports. The - Compaq 2510p | External Devices - Windows XP - Page 8
device. ▲ To connect a USB device to the computer, connect the USB cable for the device to the USB port. You will hear a sound when the device has been detected. NOTE: The first time you connect a USB device, the "Found New Hardware" message is displayed in the notification area, at the far right - Compaq 2510p | External Devices - Windows XP - Page 9
or an optional USB bootable device USB legacy support is enabled at the factory. To disable or enable USB legacy support: 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the - Compaq 2510p | External Devices - Windows XP - Page 10
device to the computer. Scanners, digital cameras, and digital camcorders often require a 1394 connection. Some 1394 devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the user guide for the device - Compaq 2510p | External Devices - Windows XP - Page 11
force to connect a 1394 device. ▲ To connect a 1394 device to the computer, connect the 1394 cable for the device to the 1394 port. You will hear in the notification area, at the far right of the taskbar. NOTE: To display the Safely Remove Hardware icon, click the Show Hidden Icons icon (< or - Compaq 2510p | External Devices - Windows XP - Page 12
3 Using the docking connector The docking connector connects the computer to an optional docking device. An optional docking device provides additional ports and connectors that can be used with the computer. 6 Chapter 3 Using the docking connector ENWW - Compaq 2510p | External Devices - Windows XP - Page 13
Index Symbols/Numerics 1394 cable, connecting 5 1394 devices connecting 5 description 4 stopping 5 1394 port 4 C cables 1394 5 USB 2 D docking connector 6 H hubs 1 P ports 1394 4 USB 1 U USB cable, connecting 2 USB devices connecting 2 description 1 removing 2 stopping 2 USB hubs 1 USB legacy - Compaq 2510p | External Devices - Windows XP - Page 14
External Devices
User Guide