Compaq 2510p Memory Modules - Windows Vista
Compaq 2510p - Notebook PC Manual
View all Compaq 2510p manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 2510p manual content summary:
- Compaq 2510p | Memory Modules - Windows Vista - Page 1
Memory Modules User Guide - Compaq 2510p | Memory Modules - Windows Vista - Page 2
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: May 2007 Document Part Number: 440544-001 - Compaq 2510p | Memory Modules - Windows Vista - Page 3
Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. ENWW iii - Compaq 2510p | Memory Modules - Windows Vista - Page 4
iv Product notice ENWW - Compaq 2510p | Memory Modules - Windows Vista - Page 5
Table of contents Adding or replacing a memory module Index ...5 ENWW v - Compaq 2510p | Memory Modules - Windows Vista - Page 6
vi ENWW - Compaq 2510p | Memory Modules - Windows Vista - Page 7
grounded metal object. To add or replace a memory module: 1. Save your work. 2. Shut down the computer and close the display. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system - Compaq 2510p | Memory Modules - Windows Vista - Page 8
cover (2) away from the computer. 9. If you are replacing a memory module, remove the existing memory module: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only - Compaq 2510p | Memory Modules - Windows Vista - Page 9
and right edges of the memory module, until the retention clips snap into place. 11. Align the tabs (1) on the memory module compartment cover with the notches on the computer. 12. Close the cover (2). 13. Tighten the 2 memory module compartment cover screws (3). 14. Replace the battery. ENWW 3 - Compaq 2510p | Memory Modules - Windows Vista - Page 10
15. Reconnect external power and external devices. 16. Turn on the computer. 4 Adding or replacing a memory module ENWW - Compaq 2510p | Memory Modules - Windows Vista - Page 11
Index M memory module adding 1 inserting 3 removing 2 replacing 1 upgrading 1 memory module compartment cover removing 2 replacing 3 ENWW Index 5 - Compaq 2510p | Memory Modules - Windows Vista - Page 12
Memory Modules
User Guide