Compaq 2710p Computer Setup - Windows XP and Windows Vista
Compaq 2710p - Notebook PC Manual
View all Compaq 2710p manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 2710p manual content summary:
- Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 1
Computer Setup User Guide - Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 2
accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Second Edition: March 2007 First Edition: January 2007 Document Part Number: 419703-002 - Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 3
Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. ENWW iii - Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 4
iv Product notice ENWW - Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 5
Table of contents 1 Starting Computer Setup 2 Using Computer Setup Navigating and selecting in Computer Setup 2 Restoring factory settings in Computer Setup 3 3 Computer Setup menus File menu ...4 Security menu ...5 Diagnostics menu ...6 System Configuration menu ...6 Index ...8 ENWW v - Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 6
vi ENWW - Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 7
keyboard connected by USB can be used with Computer Setup only if USB legacy support is enabled. To start Computer Setup, follow these steps: 1. Turn on or restart the computer. 2. Before Windows® opens and while the "F10=ROM Based Setup" message is displayed in the lower-left corner of the screen - Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 8
Configuration menus. 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. Because Computer Setup is not Windows-based, it does not support the TouchPad. Navigation and - Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 9
steps: 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower- Then follow the instructions on the screen. Your preferences go into effect when the computer restarts. NOTE: Your password settings and - Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 10
for the computer and the batteries in the system. ● View specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version. Replace the configuration settings in Computer Setup with the original factory settings. (Password settings and - Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 11
on optional MultiBay hard drives. ● Change a DriveLock user password or master password. NOTE: DriveLock settings are accessible only when you enter Computer Setup by turning on (not restarting) the computer. Enable/disable support for smart card and Java™ Card poweron authentication. NOTE: Power-on - Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 12
or on any optional MultiBay hard drive. Run a comprehensive check on system memory. Verify the system components needed for starting the computer. System Configuration menu NOTE: Some of the listed System Configuration options may not be supported by your computer. Select Language (or press f2 - Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 13
power by turning off the LAN when not in use. ● Enable/disable SATA Native Mode. ● Enable/disable Dual Core CPU. ● Enable/disable Secondary Battery Fast Charge. ● Choose Bit-shift or LBA assisted HDD Translation Mode. ● Enable/disable Windows direct application launcher. ● Enable/disable HP Lockout - Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 14
smart card security 5 startup check 6 stringent security 5 System Configuration menu 6 system fan 7 system information 4 U USB legacy support 1, 6 F File menu 4 H hard drive test 6 L LAN Power Save 7 language, changing in Computer Setup 6 legacy support, USB 1, 6 M memory check 6 8 Index ENWW - Compaq 2710p | Computer Setup - Windows XP and Windows Vista - Page 15
Computer Setup
User Guide