Compaq 2710p Memory Modules - Windows Vista
Compaq 2710p - Notebook PC Manual
View all Compaq 2710p manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 2710p manual content summary:
- Compaq 2710p | Memory Modules - Windows Vista - Page 1
Memory Modules User Guide - Compaq 2710p | Memory Modules - Windows Vista - Page 2
© Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be - Compaq 2710p | Memory Modules - Windows Vista - Page 3
Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. iii - Compaq 2710p | Memory Modules - Windows Vista - Page 4
iv Product notice - Compaq 2710p | Memory Modules - Windows Vista - Page 5
Table of contents Adding or replacing a memory module Index ...5 v - Compaq 2710p | Memory Modules - Windows Vista - Page 6
vi - Compaq 2710p | Memory Modules - Windows Vista - Page 7
can be upgraded by adding a memory module to the vacant expansion memory module slot (1) or by upgrading the existing memory module in the primary memory module slot (2). WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before - Compaq 2710p | Memory Modules - Windows Vista - Page 8
upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the 6 memory module compartment screws (1). 8. Lift the memory module compartment cover (2) away from the computer. 9. If you are replacing a memory module, remove the existing memory module: a. Pull away the retention - Compaq 2710p | Memory Modules - Windows Vista - Page 9
are vacant, be sure that you insert the memory module into the primary memory module slot. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components - Compaq 2710p | Memory Modules - Windows Vista - Page 10
14. Replace the battery. 15. Reconnect external power and external devices. 16. Turn on the computer. 4 Adding or replacing a memory module - Compaq 2710p | Memory Modules - Windows Vista - Page 11
Index M memory adding memory modules 1 replacing memory modules 1 upgrading memory modules 1 memory module adding 1 inserting 2 removing 2 replacing 1 upgrading 1 memory module compartment cover removing 2 replacing 3 Index 5 - Compaq 2710p | Memory Modules - Windows Vista - Page 12
Memory Modules
User Guide