Compaq 516 Memory Modules - Windows Vista

Compaq 516 - Notebook PC Manual

Get Compaq 516 - Notebook PC PDF manuals and user guides View all Compaq 516 manuals
Add to My Manuals
Save this manual to your list of manuals

Compaq 516 manual content summary:

  • Compaq 516 | Memory Modules - Windows Vista - Page 1
    Memory Modules User Guide
  • Compaq 516 | Memory Modules - Windows Vista - Page 2
    such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: June 2009 Document Part Number: 533488-001 Product notice This user guide describes features
  • Compaq 516 | Memory Modules - Windows Vista - Page 3
    Table of contents Adding or replacing memory modules Adding or replacing a memory module in the expansion memory module slot 2 Upgrading a memory module in the primary memory module slot 5 Index ...8 iii
  • Compaq 516 | Memory Modules - Windows Vista - Page 4
    iv
  • Compaq 516 | Memory Modules - Windows Vista - Page 5
    . WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning any procedure, touch a grounded metal object to be
  • Compaq 516 | Memory Modules - Windows Vista - Page 6
    upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the memory module compartment cover screw (1). 8. Lift the memory module compartment cover (2) away from the computer. 9. Remove the memory module from the expansion memory slot: a. Pull away the retention clips (1) on
  • Compaq 516 | Memory Modules - Windows Vista - Page 7
    place it in an electrostatic-safe container. 10. Insert a memory module in the expansion memory slot: a. Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the
  • Compaq 516 | Memory Modules - Windows Vista - Page 8
    13. Tighten the memory module compartment cover screw (3). 14. Replace the battery. 15. Turn the computer right-side up, and then reconnect external power and external devices. 16. Turn on the computer. 4 Adding or replacing memory modules
  • Compaq 516 | Memory Modules - Windows Vista - Page 9
    from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the memory module compartment cover screw (1). 8. Lift the memory module compartment cover (2) away from the computer. NOTE: If a memory module is installed in the expansion
  • Compaq 516 | Memory Modules - Windows Vista - Page 10
    it in an electrostatic-safe container. 10. Insert a memory module in the primary memory module slot: a. Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the
  • Compaq 516 | Memory Modules - Windows Vista - Page 11
    12. Close the cover (2). 13. Tighten the memory module compartment cover screw (3). 14. Replace the battery. 15. Turn the computer right-side up, and then reconnect external power and external devices. 16. Turn on the computer. Upgrading a memory module in the primary memory module slot 7
  • Compaq 516 | Memory Modules - Windows Vista - Page 12
    Index M memory module adding 2 inserting 6 removing 2, 5 replacing 2, 5 upgrading primary 5 memory module compartment cover removing 2 replacing 3 memory, replacing memory modules 2, 5 8 Index
  • Compaq 516 | Memory Modules - Windows Vista - Page 13
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
Memory Modules
User Guide