Compaq 8510p Wireless (Select Models Only) - Windows XP - Page 18

Inserting a SIM - shuts down

Get Compaq 8510p - Notebook PC PDF manuals and user guides View all Compaq 8510p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Inserting a SIM CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM. To insert a SIM: 1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system. 2. Close the display. 3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface, with the battery bay toward you. 6. Remove the battery. 7. With the notch on the SIM oriented as shown in the illustration, insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated. NOTE: The SIM is designed with a notch on one corner to prevent incorrect installation into the SIM slot. If the SIM is installed improperly, the battery cannot be snapped into place. 8. Replace the battery. NOTE: HP Broadband Wireless will be disabled if the battery is not replaced. 9. Reconnect external power. 10. Turn on the computer. 14 Chapter 4 Using HP Broadband Wireless (select models only) ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
Inserting a SIM
CAUTION:
To prevent damage to the connectors, use minimal force when inserting a SIM.
To insert a SIM:
1.
Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the
computer on by pressing the power button. Then shut down the computer through the operating
system.
2.
Close the display.
3.
Disconnect all external devices connected to the computer.
4.
Unplug the power cord from the AC outlet.
5.
Turn the computer upside down on a flat surface, with the battery bay toward you.
6.
Remove the battery.
7.
With the notch on the SIM oriented as shown in the illustration, insert the SIM into the SIM slot,
and gently push the SIM into the slot until it is firmly seated.
NOTE:
The SIM is designed with a notch on one corner to prevent incorrect installation into the
SIM slot. If the SIM is installed improperly, the battery cannot be snapped into place.
8.
Replace the battery.
NOTE:
HP Broadband Wireless will be disabled if the battery is not replaced.
9.
Reconnect external power.
10.
Turn on the computer.
14
Chapter 4
Using HP Broadband Wireless (select models only)
ENWW