Compaq BL10e Microsoft Windows Event ID and SNMP Traps Reference Guide for use
Compaq BL10e - HP ProLiant - 512 MB RAM Manual
UPC - 613326445501
View all Compaq BL10e manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq BL10e manual content summary:
- Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 1
Microsoft Windows Event ID and SNMP Traps Reference Guide For use with SmartStart version 8.25 Part number: 347870-009 Ninth edition: June 2009 - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 2
such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 3
-774 ...29 Event Identifiers 1061-1098 ...32 Event Identifiers 1101-1199 ...38 Event Identifiers 1200-1294 ...64 Event Identifiers 1343-4613 ...77 Server agents...82 Event Identifiers 256-774 ...82 Event Identifiers 1024-1092 ...85 Event Identifiers 1103-1183 ...93 Event Identifiers 1539-3352 ...124 - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 4
the HP Insight Management Agents for Servers for Windows®. Each event entry has the corresponding SNMP trap number used by the agents. Other information , and Supporting SNMP Trap Data. Windows NT® event log format The following pages contain HP Insight Management events that are entered into the - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 5
help In addition to this guide, the following information sources are available: • User documentation • HP Insight Manager software Telephone numbers For the name of the nearest HP authorized reseller: • In the United States, see the HP US service locator webpage, http://www.hp.com/service_locator - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 6
257 (Hex)0x84350101 (Service Event) Log Severity: Warning (2) Log Message: The Foundation Agents service could not allocate memory. The data contains the 262 (Hex)0x84350106 (Service Event) Log Severity: Warning (2) Log Message: The Foundation Agents service could not start any agents successfully. - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 7
agent "%1". The data contains the error code. Event identifier: cpqhsmsg.dll - 267 (Hex)0x8435010b (Service Event) Log Severity: Warning (2) Log Message: The Foundation Agents service could not start agent "%1". The data contains the error code. Event identifier: cpqhsmsg.dll - 268 (Hex)0x8435010c - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 8
service. Please install the SNMP service to enabled remote management of the server. Event identifier: cpqhsmsg.dll - 768 (Hex)0x84350300 (Service event log of the system named %1. The data contains the error code. Event identifier: cpqhsmsg.dll - 772 (Hex)0xc4350304 (Service Event) Log Severity: - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 9
code. Event identifier: cpqhsmsg.dll - 774 (Hex)0xc4350306 (Service Event) Log Severity: Error (3) Log Message: The Host Remote Specific error information is contained in the variable cpqHoSwPerfAppErrorDesc. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHoSwPerfAppErrorDesc Supporting - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 10
within the variable list are those of the alarm entry that generated this trap. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqMeAlarmVariable • cpqMeAlarmSampleType • cpqMeAlarmValue • cpqMeAlarmFallingThreshold • cpqMeAlarmOwner • cpqMeAlarmSeverity • cpqMeAlarmExtendedDescription - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 11
: cpqHoProcessEventTrap - 11011 in CPQHOST.MIB Symptom: A monitored process has either started or stopped running. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHoSwRunningTrapDesc Supporting SNMP Trap Description: "[cpqHoSwRunningTrapDesc]" NT Event ID: 1167 (Hex)0x8435048f (cpqhsmsg - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 12
time the condition of a cluster network becomes degraded. User Action: Make a note of the cluster network name, and then check the network for the cause of the degraded condition. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqClusterNetworkName Supporting SNMP Trap Description: "Cluster - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 13
of a cluster network has failed. User Action: Make a note of the cluster network name, and then check the network for the cause of the failure. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqClusterNetworkName Supporting SNMP Trap Description: "Cluster network [cpqClusterNetworkName] has - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 14
SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqOsCpuIndex • cpqOsCpuInstance • cpqOsCpuTimePercent Supporting SNMP Trap Description: "The Processor performance Instance, [cpqOsCpuInstance] is degraded with Processor Time of [cpqOsCpuTimePercent] percent." NT Event ID: 1174 (Hex)0xc4350496 (cpqhsmsg - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 15
.MIB Symptom: The Cache CopyReadHits performance property is set to critical. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqOsCacheIndex • cpqOsCacheInstance • cpqOsCacheCopyReadHitsPercent Supporting SNMP Trap Description: "The Cache performance property is critical with CopyReadHits - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 16
Severity: Error (3) Log Message: The Logical Disk Performance Instance, '%4' is failed with Disk Busy Time of %5 percent. SNMP Trap: cpqOsLogicalDiskBusyTimeFailed Symptom: This trap is sent to notify the user of a Critical Software Update. Supporting SNMP Trap Data: • sysName Foundation agents 16 - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 17
by a failure in the Remote Access Service or by a missing or invalid configuration. Use the Management Agents control panel to verify the Asynchronous Management configuration settings. Use the Network control panel to verify the Remote Access configuration. If this error persists, reinstalling the - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 18
thread. This error can be caused by a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 2098 (Hex)0x84350832 (Service Event) Log Severity: Warning (2) Log Message: Unable to acquire file system information. This error can be caused by an unformatted - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 19
this error. Event identifier: cpqhsmsg.dll - 2101 (Hex)0x84350835 (Service Event) Log Severity: Warning (2) Log Message: Unable to acquire the CPU performance data. This error can be caused by a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 2304 - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 20
system type. The data contains the error code. Event identifier: cpqhsmsg.dll - 2354 (Hex)0x84350932 (Service service is configured to allow SNMP requests from "localhost". 2) Be sure that there is an adequate amount of free memory. Event identifier: cpqhsmsg.dll - 2356 (Hex)0x84350934 (Service - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 21
caused by a corrupt registry, a low memory condition, or incomplete configuration. Reconfigure the Management Agents using the control panel. Rebooting the server may also correct this error. Event identifier: cpqhsmsg.dll - 3085 (Hex)0x84350c0d (Service Event) Log Severity: Warning (2) Log Message - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 22
the system will correct this error. Event identifier: cpqhsmsg.dll - 3841 (Hex)0x84350f01 (Service Event) Log Severity: Warning (2) Log Message: Could not read from the registry sub-key. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 23
(1) Log Message: Resource status is initializing. The Cluster service is starting. Event identifier: cpqhsmsg.dll - 3865 (Hex)0x44350f19 (Service Event) Log Severity: Information (1) Log Message: Resource status is pending. The Cluster service is starting or the resource is being put back online or - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 24
only supports the disk resource class. Event identifier: cpqhsmsg.dll - 3874 (Hex)0x84350f22 (Service Event) Log Severity: Warning (2) Log Message: Could not read the registry sub-key: "%1". This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 25
the cluster's networks. The Cluster service may not be running. Try to restart the Cluster service. Event Identifiers 4352-4626 Event identifier: cpqhsmsg.dll - 4352 (Hex)0x84351100 (Service Event) Log Severity: Warning (2) Log Message: The External Status MIB Agent could not allocate memory. The - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 26
the system type. The data contains the error code. Event identifier: cpqhsmsg.dll - 4402 (Hex)0x84351132 (Service service is configured to allow SNMP requests from "localhost." 2. Be sure that there is an adequate amount of free memory. Event identifier: cpqhsmsg.dll - 4405 (Hex)0x84351135 (Service - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 27
a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 4623 (Hex)0x8435120f (Service Event) Log Severity: Warning (2) Log Message: The Agent could not access WMI. The WMI support may have not been started or installed. Restart or - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 28
or may still be in the starting state. Event identifier: cpqhsmsg.dll - 4626 (Hex)0x84351212 (Service Event) Log Severity: Warning (2) Log Message: The Agent failed to process the MOF file to get the data from WMI. Problem with WMI service or MOF file or wrong file paths used. Foundation agents 28 - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 29
(Service Event) Log Severity: Warning (2) Log Message: The Storage Agents service could not allocate memory. The service could not start any agents successfully. Event identifier: cpqstmsg.dll - 263 (Hex)0x84350107 (Service Event) Log Severity: Warning (2) Log Message: The Storage Agents service - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 30
for module "%1". The data contains the error code. Event identifier: cpqstmsg.dll - 267 (Hex)0x8435010b (Service Event) Log Severity: Warning (2) Log Message: The Storage Agents service could not start agent "%1". The data contains the error code. Event identifier: cpqstmsg.dll - 268 (Hex)0x8435010c - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 31
by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 526 (Hex)0x8435020e (Service Event) Log Severity: Warning (2) Log Message: Unsupported storage system. The ProLiant storage system %1 is not supported by this version of the - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 32
Log Message: The Drive Array Agent storage system table is full. Event identifier: cpqstmsg.dll - 574 (Hex)0x8435023e (Service Event) Log Severity: Warning (2) Log Message: The Drive Array Agent failed to get capacity on SCSI drive because SCSI pass through IOCTL failed. Event identifier: cpqstmsg. - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 33
that the agent has detected a change in the status of a drive array spare drive. The variable cpqDaSpareStatus indicates the current spare drive status. User Action: If the spare drive status is failed, replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaSpareStatus - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 34
has detected a change in the status of a drive array physical drive. The variable cpaDaPhyDrvStatus indicates the current physical drive status. User Action: If the physical drive status is failed(3) or predictiveFailure(4), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 35
accelerator cache board that has lost battery power. If data was being stored in the accelerator cache memory when the server lost power, that data has been lost. User Action: Verify that no data has been lost. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrSlot • cpqDaCntlrModel - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 36
: cpqScsi5PhyDrvStatusChange - 5020 in CPQSCSI.MIB Symptom: Physical Drive Status Change. The Storage Agent has detected a change in the status of a SCSI physical drive. The current physical drive status is indicated in the cpqScsiPhyDrvStatus variable. Supporting SNMP Trap Data: Storage agents 36 - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 37
.MIB Symptom: Storage System fan status change. The agent has detected a change in the Fan Status of a storage system. The variable cpqSsBoxFanStatus indicates the current fan status. User Action: If the fan status is degraded or failed, replace any failed fans. Supporting SNMP Trap Data: • sysName - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 38
User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxTempStatus Supporting SNMP Trap Description: "Storage System temperature ok." Event identifier: cpqstmsg.dll - 1098 (Hex)0x4435044a (Service Event) Log Severity: Information (1) Log Message: Drive Array Physical Drive - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 39
degraded status. Restore power or replace any failed power supply. SNMP Trap: cpqSs4PwrSupplyDegraded - 8015 in CPQSTSYS.MIB Symptom: A storage system power supply status has been set to degraded. User Action: Restore power or replace any failed storage system power supply. Supporting SNMP Trap Data - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 40
Supporting SNMP Trap Description: "A storage system power supply unit has become degraded." NT Event ID: 1107 (Hex)0xc4350453 (cpqstmsg.dll) Log Severity: Error (3) Event Title: SCSI Tape Drive Status Change. Log Message: The tape drive with SCSI target %6 connected to SCSI - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 41
- 14001 in CPQIDE.MIB Symptom: An IDE drive status has been set to degraded. User Action: The drive should be scheduled for replacement. For detailed information on a component replacement, see the appropriate Maintenance and Service Guide. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 42
a change in the status of an External Array logical drive. The variable cpqFcaLogDrvStatus indicates the current logical drive status. User Action: If the logical drive status is failed, examine the array for failed drives that need replacement. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 43
an External Channel Array spare drive. The variable cpqFcaSpareStatus indicates the current spare drive status. The variable cpqFcaSpareBusNumber indicates the SCSI bus number associated with this drive. User Action: If the spare drive status is failed, replace the drive. Supporting SNMP Trap Data - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 44
Accelerator Cache Board that has lost battery power. If data was being stored in the accelerator memory when the system lost power, that data has been lost. User Action: Verify that no data has been lost. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 45
.MIB Symptom: Storage system fan status change. The agent has detected a change in the fan module status of a storage system. The variable cpqSsFanModuleStatus indicates the current fan status. User Action: If the fan status is degraded or failed, replace any failed fans. Supporting SNMP Trap Data - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 46
Storage system power supply status change. The agent has detected a change in the power supply status of a storage system. The variable cpqSsPowerSupplyStatus indicates the current status. User Action: If the power supply status is failed, restore power or replace the failed power supply. Supporting - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 47
Supporting SNMP Trap Description: "Storage system power supply SCSI Tape Library Failed. Log Message: The SCSI tape library with SCSI target %6 connected to SCSI bus %5 of the controller in slot %4 has encountered an error. SNMP Trap: cpqTape3LibraryFailed - 5010 in CPQSCSI.MIB Symptom: Tape - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 48
Supporting SNMP Trap Description: "Tape library [cpqTapeLibrarySerialNumber] is not operational." NT Event ID: 1157 (Hex)0x84350485 (cpqstmsg.dll) Log Severity: Warning (2) Event Title: SCSI Tape Library OK. Log Message: The SCSI tape library with SCSI target %6 connected to SCSI - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 49
SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqTapeLibrarySerialNumber Supporting SNMP Trap Description: "Tape library [cpqTapeLibrarySerialNumber] door closed." NT Event ID: 1161 (Hex)0xc4350489 (cpqstmsg.dll) Log Severity: Error (3) Event Title: SCSI CD Library Status Change. Log Message: The - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 50
User Action: Check the partner controller for problems. If this was the result of a user initiated switchover, no action is required. Supporting Severity: Warning (2) Event Title: Fibre Channel Tape Controller Status Change. Log Message: Fibre Channel tape controller with world wide name "%4" has a - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 51
world wide name associated with this controller. User Action: If the tape controller status is offline, access to the tape library and tapes has been lost. Check the tape library and all Fibre connections for problems. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeCntlrWWN - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 52
Fiber Channel Tape Drive. The variable cpqFcTapeDriveStatus indicates the current tape status. The variable cpqFcTapeDriveScsiTarget indicates the SCSI ID of the tape drive. User Action: If the tape is failed or is offline, check the tape and all fibre channel connections. Supporting SNMP Trap Data - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 53
- 16013 in CPQFCA.MIB Symptom: Fibre Channel Tape Drive Cleaning Tape Needs Replacing. The agent has detected that an autoloader tape unit has a cleaning tape that has been fully used and therefore needs to be replaced with a new cleaning tape. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 54
Drive Array Tape Library Status Change. Log Message: The tape library in slot %4, SCSI bus %5, SCSI tape library door status. The variable cpqDaTapeLibraryScsiTarget indicates the SCSI ID of the tape library. User Action: If the tape library door is open, close the tape library door. Supporting - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 55
a change in the status of a tape drive. The variable cpqDaTapeDrvStatus indicates the current tape status. The variable cpqDaTapeDrvScsiIdIndex indicates the SCSI ID of the tape drive. User Action: If the tape is failed, check the tape and all SCSI connections. Supporting SNMP Trap Data: • sysName - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 56
- 3024 in CPQIDA.MIB Symptom: Tape Drive Cleaning Tape Needs Replacing. The agent has detected that an autoloader tape unit has a cleaning tape that has been fully used and therefore needs to be replaced with a new cleaning tape. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 57
a change in the status of an ATA disk drive. The variable cpqIdeAtaDiskStatus indicates the current disk drive status. User Action: If the physical drive status is smartError(3) or failed(4), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqIdeAtaDiskControllerIndex - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 58
.MIB Symptom: Storage System Fan Status Change. The agent has detected a change in the fan status of a storage system. The variable cpqSsBackplaneFanStatus indicates the current fan status. User Action: If the fan status is degraded or failed, replace any failed fans. Supporting SNMP Trap Data - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 59
Supporting SNMP Trap Description: "Storage system power supply status changed to [cpqSsBackplaneFtpsStatus]." NT Event ID: 1191 (Hex)0x843504a7 (cpqstmsg.dll) Log Severity: Warning (2) Event Title: SCSI Tape Library Status Change. Log Message: The tape library with SCSI target %6 connected to SCSI - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 60
has detected a change in the status of an External Tape Drive. The variable cpqFcTapeDriveStatus indicates the current tape status. User Action: If the tape is failed or is offline, check the tape and all connections. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeDriveCntlrIndex - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 61
• cpqFcTapeDriveLocation Supporting SNMP Trap Description: "Cleaning is needed for tape drive." NT Event ID: 1195 (Hex)0x843504ab (cpqstmsg.dll) Log Severity: Warning (2) Event Title: External Tape Drive Replace Cleaning Tape. Log Message: The cleaning tape in the tape drive at location "%4" needs - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 62
Supporting SNMP Trap Description: "Storage system recovery server option status changed to [cpqSsChassisRsoStatus]." NT Event ID: 1197 (Hex)0x843504ad (cpqstmsg.dll) Log Severity: Warning (2) Event Title: External Tape Library Status Change. Log Message: The tape library at location - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 63
in the door status of an External Tape library. The variable cpqFcTapeLibraryDoorStatus indicates the current tape library door status. User Action: If the tape library door is open, close the tape library door. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeLibraryCntlrIndex - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 64
User Action: If the board status is generalFailure(3), you may need to replace the controller. If the board status is cableProblem(4), check the cable connections between the controller and the storage system. Supporting : Drive Array Logical Drive Status Change. Log Message: Logical drive number - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 65
has detected a change in the status of a drive array physical drive. The variable cpaDaPhyDrvStatus indicates the current physical drive status. User Action: If the physical drive status is failed(3) or predictive Failure(4), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 66
detected a factory threshold associated with one of the physical drive objects on a drive array has been exceeded. User Action: Replace the physical drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaPhyDrvCntlrIndex • cpqDaPhyDrvIndex • cpqDaPhyDrvBusNumber - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 67
memory when the server lost power, that data has been lost. User Action: Verify that no data has been lost. Supporting Supporting SNMP Trap Description: "Accelerator lost battery power. Data Loss possible." NT Event ID: 1206 (Hex)0x843504b6 (cpqstmsg.dll) Log Severity: Warning (2) Event Title: Drive - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 68
The variable cpqDaTapeLibraryDoorStatus indicates the current tape library door status. The variable cpqDaTapeLibraryScsiTarget indicates the SCSI ID of the tape library. User Action: If the tape library door is open, close the tape library door. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 69
a change in the status of a tape drive. The variable cpqDaTapeDrvStatus indicates the current tape status. The variable cpqDaTapeDrvScsiIdIndex indicates the SCSI ID of the tape drive. User Action: If the tape is failed, check the tape and all SCSI connections. Supporting SNMP Trap Data: • sysName - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 70
cpqDaTapeDrvFwRev • cpqDaTapeDrvSerialNumber Supporting SNMP Trap Description: "Cleaning tape needs replacing." NT Event ID: 1212 (Hex)0x843504bc (cpqstmsg.dll) Log Severity: Warning (2) Event Title: Storage System Fan Status Change. Log Message: The %6 %7 storage system connected to SCSI bus %5 of - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 71
Event ID: 1214 (Hex)0x843504be (cpqstmsg.dll) Log Severity: Warning (2) Event Title: Storage System Fault Tolerant Power Supply Status Change. Log Message: The fault tolerant power supply in the %6 %7 storage system connected to SCSI bus %5 of the controller in %4 has a new status of %2. SNMP Trap - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 72
User Action: If the power supply status is degraded, restore power or replace the failed power supply. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxCntlrHwLocation • cpqSsBoxCntlrIndex • cpqSsBoxBusIndex • cpqSsBoxVendor • cpqSsBoxModel • cpqSsBoxSerialNumber • - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 73
that the agent has detected a change in the status of a drive array spare drive. The variable cpqDaSpareStatus indicates the current spare drive status. User Action: If the spare drive status is failed, replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 74
.MIB Symptom: Storage System Fan Status Change. The agent has detected a change in the fan status of a storage system. The variable cpqSsBoxFanStatus indicates the current fan status. User Action: If the fan status is degraded or failed, replace any failed fans. Supporting SNMP Trap Data: • sysName - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 75
has detected a change in the power supply status of a storage system. The variable cpqSsBoxFltTolPwrSupplyStatus indicates the current power supply status. User Action: If the power supply status is degraded, restore power or replace the failed power supply. Supporting SNMP Trap Data: • sysName - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 76
• cpqSasLogDrvOsName Supporting SNMP Trap Description: "Status is now [cpqSasLogDrvStatus]." Event identifier: cpqstmsg.dll - 1280 (Hex)0x84350500 (Service Event) Log Severity: Warning (2) Log Message: Unable to allocate memory. This indicates a low memory condition. Rebooting the system will - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 77
by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 1294 (Hex)0x8435050e (Service Event) Log Severity: Warning (2) Log Message: Unsupported storage system. The ProLiant storage system %1 is unsupported by this version of - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 78
to deliver a trap. This can be caused by a failure in the Remote Access Service or by a missing or invalid configuration. Use the HP Insight Management Agents control panel to verify the Asynchronous Management configuration settings. Use the Network control panel to verify the Remote Access - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 79
Agent could not allocate memory. The data contains the error code. Event identifier: cpqstmsg.dll - 3585 (Hex)0x84350e01 (Service Event) Log Severity: the error code. Event identifier: cpqstmsg.dll - 3591 (Hex)0x84350e07 (Service Event) Log Severity: Warning (2) Log Message: The IDE Agent could not - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 80
the registry subkey. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 4098 (Hex)0x84351002 (Service Event) Log Severity: Warning (2) Log Message: Could not write the registry subkey: "%1". This - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 81
read the registry subkey: "%1". This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 4609 (Hex)0x84351201 (Service Event) Log Severity: Warning (2) Log Message: Could not read the registry subkey. This - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 82
string is: %1. The data contains the error code. Event identifier: cpqsvmsg.dll - 257 (Hex)0x84350101 (Service Event) Log Severity: Warning (2) Log Message: The Server Agents service could not allocate memory. The data contains the error code. Event identifier: cpqsvmsg.dll - 258 (Hex)0x84350102 - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 83
agent "%1". The data contains the error code. Event identifier: cpqsvmsg.dll - 267 (Hex)0x8435010b (Service Event) Log Severity: Warning (2) Log Message: The Server Agents service could not start agent "%1". The data contains the error code. Event identifier: cpqsvmsg.dll - 268 (Hex)0x8435010c - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 84
Service Event) Log Severity: Information (1) Log Message: The Server Agents service version %1 has started. Event identifier: cpqsvmsg.dll - 401 (Hex)0x44350191 (Service of the system named %1. The data contains the error code. Event identifier: cpqsvmsg.dll - 772 (Hex)0xc4350304 (Service Event) Log - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 85
- 6047 in CPQHLTH.MIB Symptom: Advanced Memory Protection Online Spare Engaged. The Advanced Memory Protection subsystem has detected a memory fault. The Online Spare Memory has been activated. User Action: Schedule server down time to replace the faulty memory. Supporting SNMP Trap Data: • sysName - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 86
Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "The Advanced Memory Protection subsystem has engaged the XOR memory." NT Event ID: 1029 (Hex)0x44350405 (cpqsvmsg.dll) Log Severity: Information (1) Log Message: The Fault Tolerant Power Supply Sub-system has returned to a redundant - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 87
memory board or cartridge. SNMP Trap: cpqHe5ResMemBoardRemoved - 6065 in CPQHLTH.MIB Symptom: Memory board or cartridge or riser removed. An Advanced Memory Protection sub-system board or cartridge or riser has been removed from the system. Value 0 for CPU means memory is not processor-based. Server - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 88
An Advanced Memory Protection sub-system board, cartridge, or riser has been installed. Value 0 for CPU means memory is not processor-based. User Action: None. SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeResMem2BoardSlotNum • cpqHeResMem2BoardCpuNum • cpqHeResMem2BoardRiserNum Supporting SNMP - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 89
) Log Severity: Warning (3) Log Message: The Advanced Memory Protection sub-system has detected a memory fault. The LockStep recovery engine has been activated. For instruction on replacing the faulty memory, see the server documentation. SNMP Trap: cpqHeResilientMemLockStepMemoryEngaged - 6068 in - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 90
normally. The system is shut down if the cpqHeThermalDegradedAction variable is set to shutdown (3). Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeThermalDegradedAction Supporting SNMP Trap Description: "Required fan not operating normally. Shutdown may occur." Server agents 90 - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 91
has been set to failed. The system will be shut down due to this condition. SNMP Trap: cpqHe3ThermalCpuFanFailed - 6023 in CPQHLTH.MIB Symptom: The CPU fan status has been set to failed. A processor fan is not operating normally. The server is shut down. Supporting SNMP Trap Data: • sysName - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 92
non-operational processor fans have returned to normal operation. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "CPU fan is now OK." NT Event ID: 1090 (Hex)0x44350442 (cpqsvmsg.dll) Log Severity: Information (1) Log Message: The server is operational again - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 93
- 6028 in CPQHLTH.MIB Symptom: The fault tolerant power supply sub-system condition has been set to degraded. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "The server power supply status has become degraded." NT Event ID: 1108 (Hex - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 94
an error in the Remote Insight/ Integrated Lights-Out interface. The firmware is not responding. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "Server [sysName], Remote Insight/Integrated Lights-Out interface error." NT Event ID: 1112 (Hex)0x84350458 - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 95
• cpqSeCpuSocketNumber Supporting SNMP Trap Description: "CPU internal corrected errors have passed a set threshold." NT Event ID: 1115 (Hex)0x8435045b (cpqsvmsg.dll) Log Severity: Warning (2) Log Message: A computer cover has been removed since last system start up. Be sure the system cover is - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 96
Message: The Fault Tolerant Power Supply Sub-system has been returned to the OK state. SNMP Trap: cpqHe4FltTolPowerSupplyOk - 6048 in CPQHLTH.MIB Symptom: The fault tolerant power supply condition has been set back to the OK state for the specified chassis and bay location. Supporting SNMP Trap Data - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 97
Tolerant Power Supply Sub-system is in a failed state. Restore power or replace the failed power supply. SNMP Trap: cpqHe4FltTolPowerSupplyFailed - 6050 in CPQHLTH.MIB Symptom: The fault tolerant power supply condition has been set to failed for the specified chassis and bay location. Supporting - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 98
Fault Tolerant Power Supply Inserted. A hot-plug fault tolerant power supply has been inserted into the system. SNMP Trap: cpqHe3FltTolPowerSupplyInserted - 6033 in CPQHLTH.MIB Symptom: A Fault Tolerant Power Supply has been inserted into the specified chassis and bay location. Supporting SNMP Trap - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 99
Supporting SNMP Trap Description: "The Power Supply Removed on Chassis [cpqHeFltTolPowerSupplyChassis], Bay [cpqHeFltTolPowerSupplyBay]." NT Event ID: 1129 (Hex)0x84350469 (cpqsvmsg.dll) Log Severity: Warning (2) Log Message: The Fan Sub-system is in a degraded state. Replace the fan - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 100
.dll) Log Severity: Information (1) Log Message: Fan Inserted. A hot-plug fan has been inserted into the system. SNMP Trap: cpqHe3FltTolFanInserted - 6038 in CPQHLTH.MIB Symptom: A Fault Tolerant Fan has been inserted into the specified chassis and fan location. Supporting SNMP Trap Data: • sysName - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 101
OK. The system's temperature has returned to the normal operating range. SNMP Trap: cpqHe3TemperatureOk - 6042 in CPQHLTH.MIB Symptom: The temperature status has been set to OK in the specified chassis and location. The server's temperature has returned to the normal operating range. Supporting SNMP - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 102
: The DC-DC Power Converter sub-system has lost redundancy. Replace any failed or degraded power converters. SNMP Trap: cpqHe3PowerConverterRedundancyLost - 6045 in CPQHLTH.MIB Symptom: The DC-DC Power Converters have lost redundancy for the specified chassis. Supporting SNMP Trap Data: • sysName - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 103
has failed to power up in the specified chassis and slot. User Action: Be sure the board and all cables are installed correctly, and that the board type and revision are the same as the replaced board. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSiHotPlugSlotChassis Server agents 103 - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 104
agent or utility has changed the name of the rack. Each of the server blades in each of the enclosure within the rack is updated to reflect the new rack name. It may take several minutes for the rack name change to be propagated throughout the entire rack. User Action: None. Supporting SNMP Trap - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 105
Supporting SNMP Trap Description: "The enclosure name has changed to been removed from the rack. User Action: None. Supporting SNMP Trap Data: • • cpqRackCommonEnclosureTrapSequenceNum Supporting SNMP Trap been inserted into the rack. User Action: None. Supporting SNMP Trap Data: • - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 106
. User Action: Shut down the enclosure and possibly the rack as soon as possible. Be sure that all fans are working properly and that air flow in the rack has not been blocked. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackCommonEnclosureName Server agents - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 107
This trap indicates that an enclosure fan has failed and that no other fans in the redundant fan group are operating. This may result in the enclosure overheating. User Action: Replace the fan as soon as possible. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName Server agents 107 - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 108
fan has returned to normal operation. SNMP Trap: cpqRackEnclosureFanOk - 22010 in CPQRACK.MIB Symptom: The enclosure fan status has been set to OK. This trap indicates that an enclosure fan has returned to normal operation. User Action: None. Supporting SNMP Trap Data: • sysName Server agents - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 109
(1) Event Title: Rack Enclosure Fan Inserted Log Message: The enclosure fan has been inserted. SNMP Trap: cpqRackEnclosureFanInserted - 22012 in CPQRACK.MIB Symptom: The enclosure fan has been inserted. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Server agents 109 - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 110
trap indicates that a power supply has failed. SNMP Trap: cpqRackPowerSupplyFailed - 22013 in CPQRACK.MIB Symptom: The power supply status has been set to failed. This trap indicates that a power supply has failed. User Action: Replace the power supply as soon as possible. Supporting SNMP Trap Data - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 111
This trap indicates that a power supply has returned to normal operation. SNMP Trap: cpqRackPowerSupplyOk - 22015 in CPQRACK.MIB Symptom: The power supply status has been set to OK. This trap indicates that a power supply has returned to normal operation. User Action: None. Supporting SNMP Trap Data - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 112
) Log Severity: Information (1) Event Title: Rack Power Supply Inserted Log Message: The power supply has been inserted. SNMP Trap: cpqRackPowerSupplyInserted - 22017 in CPQRACK.MIB Symptom: The power supply has been inserted. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 113
- 22019 in CPQRACK.MIB Symptom: The rack power supply detected an input line voltage problem. User Action: Check the power input for the power supply or replace any failed power supplies as soon as possible. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 114
. SNMP Trap: cpqRackPowerShedAutoShutdown - 22021 in CPQRACK.MIB Symptom: Server shutdown due to power shedding. The server blade was shut down due to a lack of power. User Action: Check power connections or add power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 115
Log Message: Inadequate power to power on. SNMP Trap: cpqRackServerPowerOnFailedNotEnoughPower - 22023 in CPQRACK.MIB Symptom: Inadequate power to power on. There is not enough power to power on the server blade. User Action: Check power connections or add power supplies. Supporting SNMP Trap Data - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 116
- 22024 in CPQRACK.MIB Symptom: Inadequate power to power on. There is not enough power to power on the server blade. The server enclosure micro-controller was not found. User Action: Check server enclosure connections or add power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 117
Title: Server Power On Via Manual Override Log Message: Server power on via manual override. SNMP Trap: cpqRackServerPowerOnManualOverride - 22026 in CPQRACK.MIB Symptom: Server power on via manual override. The server blade was powered on by a manual override. User Action: None. Supporting SNMP - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 118
from the enclosure. SNMP Trap: cpqRackServerBladeRemoved - 22028 in CPQRACK.MIB Symptom: Server blade removed. The server blade has been removed from the enclosure. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackServerBladeEnclosureName - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 119
Symptom: Power subsystem DC power problem. There is a power subsystem DC power problem for this power enclosure. User Action: Check the power enclosure and power supplies. Replace any failed or degraded power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName Server agents - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 120
.MIB Symptom: Unknown power consumption. There is an unknown power consumer drawing power. User Action: Check the power enclosure and power supplies. Replace any failed or degraded power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid Server agents 120 - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 121
number of power enclosures has been exceeded. User Action: Remove the extra power enclosure. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackCommonEnclosureName • cpqRackCommonEnclosureSerialNum • cpqRackCommonEnclosureTrapSequenceNum Server agents 121 - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 122
SNMP Trap: cpqRackPowerChassisConfigError - 22036 in CPQRACK.MIB Symptom: Power subsystem improperly configured. The power subsystem has been improperly configured. User Action: Check the cabling of the power enclosure. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 123
was not successfully reset and is not operational. User action: Reset the management procesessor again or re-flash the management processor firmware. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: The Management processor failed reset. NT Event ID: 1182 (Hex - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 124
software support drivers, or running the Emergency Repair procedure may correct this error. Event identifier: cpqsvmsg.dll - 1544 (Hex)0x84350608 (Service Event) Log Severity: Warning (2) Log Message: Unable to read from the registry. This error can be caused by a corrupt registry or a low memory - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 125
Management Agent control panel to verify the Asynchronous Management configuration settings. Use the Network control panel to verify the Remote Access configuration. If this error persists, reinstalling the Server Agents or the Remote Access Service may correct this error. For more information, see - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 126
installed. Install the driver from the latest Software Support for Windows. If you do not have a Remote Insight Board in this system, disable the Remote Insight Agent via the Management Agents Control Panel. Event identifier: cpqsvmsg.dll - 3351 (Hex)0x84350d17 (Service Event) Log Severity: Warning - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 127
Hex)0x84351604 (Service Event) Log 0x84351605 (Service Event) Hex)0x84351606 (Service Event) (Hex)0x84351607 (Service Event) Log Severity (Hex)0x84351608 (Service Event) Log Hex)0x84351609 (Service Event) Log Hex)0x8435160a (Service Event) Log (Hex)0x8435160b (Service Event) Log (Service Event) Log - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 128
system type. The data contains the error code. Event identifier: cpqsvmsg.dll - 5682 (Hex)0x84351632 (Service cpqsvmsg.dll - 5683 (Hex)0x84351633 (Service Event) Log Severity: Warning (2) Log Message identifier: cpqsvmsg.dll - 5684 (Hex)0x84351634 (Service Event) Log Severity: Warning (2) Log Message - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 129
(Hex)0x84350104 (Service Event) Log Severity: Warning (2) Log Message: The NIC Management Agent could not start the Service Control Dispatcher. The or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqnimsg.dll - 262 (Hex)0x84350106 (Service Event) Log Severity - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 130
to create thread. This error can be caused by a low memory condition. Rebooting the server may correct this error. Event identifier: cpqnimsg.dll - 271 (Hex)0x8435010f (Service Event) Log Severity: Warning (2) Log Message: Could not open the driver for device "%1". This error can be caused by an - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 131
associated with the team and re-install the drivers and team. Event identifier: cpqnimsg.dll - 274 (Hex)0x84350112 (Service Event) Log Severity: Warning (2) Log Message: The NIC Management Agent cannot generate Traps due to a communication problem with the NIC SNMP extension agent. Event identifier - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 132
Event) Log Severity: Error (3) Log Message: A driver for a NIC failed to open. This error can be caused by an improperly installed adapter. Removing and reinstalling all adapters may correct the problem. The NIC Agent service will not respond to any management requests. Event identifier: cpqnimsg - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 133
. The query was issued again. Cause: WMI service was probably restarted. Event identifier: cpqnimsg.dll - 1024 (Hex)0x84350400 (Service Event) Log Severity: with key %1. Check to make sure management service is up and running. This may cause data received from Compaq SNMP agent to be old or invalid. - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 134
configuration or by a corrupt registry. Reinstalling the Insight Agents may correct this problem. Event identifier: cpqnimsg.dll - 1033 (Hex)0x44350409 (Service (Service Event) Log Severity: Warning (2) Log Message: The NIC SNMP Management Agent was unable to forward an SNMP trap to the Compaq Remote - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 135
by a failure in the Remote Access Service or by a missing or invalid configuration. Use the Insight Agent control panel to verify the Asynchronous Management configuration settings. Use the Network control panel to verify the Remote Access configuration. If this error persists, reinstalling the - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 136
in a single adapter configuration returns to the OK condition or at least one physical adapter in a logical adapter group returns to the OK condition. This can be caused by replacement of a faulty cable or re-attaching a cable that was unplugged. User Action: None required. Supporting SNMP Trap Data - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 137
can be caused by replacing of a faulty cable or connecting a cable that was disconnected. User Action: None required. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqNicIfPhysAdapterSlot • cpqNicIfPhysAdapterPort • cpqSiServerSystemId • cpqNicIfPhysAdapterStatus • cpqSePciSlotBoardName - Compaq BL10e | Microsoft Windows Event ID and SNMP Traps Reference Guide for use - Page 138
adapter, Hub, or Switch failures can also cause this condition. User Action: Check the cables to the adapter and the Hub or Switch. If no cable problems are found, the adapter, Hub, or Switch may need replacement. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqNicIfPhysAdapterSlot
Microsoft Windows Event ID and SNMP Traps
Reference Guide
For use with SmartStart version 8.25
Part number: 347870-009
Ninth edition: June 2009