Compaq BL10e ISS Technology Update Volume 8, Number 1
Compaq BL10e - HP ProLiant - 512 MB RAM Manual
 |
UPC - 613326445501
View all Compaq BL10e manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq BL10e manual content summary:
- Compaq BL10e | ISS Technology Update Volume 8, Number 1 - Page 1
Onboard Administrator v2.30 1 Quick tip: Configuring a redundant domain controller when using Microsoft Active Directory and iLO or iLO track the power use per server through Insight Power Manager. But before the release of Onboard Administrator v2.30, the only way to determine the power use for an - Compaq BL10e | ISS Technology Update Volume 8, Number 1 - Page 2
Technology Update Volume 8, Number 1 Figure 1-1. Power Meter in Onboard Administrator v2.30 allows users to track power use for the entire enclosure. 2 - Compaq BL10e | ISS Technology Update Volume 8, Number 1 - Page 3
domain, not the specific IP address of the domain controller. If the primary DC is unavailable, the DNS lookup of the domain will not return that server's IP, so that iLO can connect to the next available domain controller. Alternatively, in the iLO configuration, administrators can use a comma or - Compaq BL10e | ISS Technology Update Volume 8, Number 1 - Page 4
www.hp.com/go/ilo "Integrating HP ProLiant Lights-Out processors with Microsoft® Active Directory" Integration Note http://h20000.www2.hp.com/bc/docs/support/Support Manual/c00190541/c00190541.pdf Microsoft TechNet online publication, "Understanding Domains and Forests", from Windows Server 2003 - Compaq BL10e | ISS Technology Update Volume 8, Number 1 - Page 5
) to the CPU that was executing the code. But this required two crucial additions to the server and OS. First, it required that the server's CPU, cache, and bus topology and memory latencies of the boot configuration needed to be mapped or described for the OS to use. Secondly, the OS would have to - Compaq BL10e | ISS Technology Update Volume 8, Number 1 - Page 6
servers Server virtualization technologies for x86-based HP BladeSystem and HP ProLiant servers, 3rd edition 10 Gigabit Ethernet technology for industry-standard servers Implementing Microsoft Windows Server 2008 R2 prerelease build on HP servers URL http://h20000.www2.hp.com/bc/docs/support
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
ISS Technology Update
Volume 8, Number 1
1
BladeSystem enclosure amperage now in Onboard Administrator v2.30
..................................................
1
Quick tip: Configuring a redundant domain controller when using Microsoft Active Directory and iLO or
iLO 2
..........................................................................................................................................................
3
Meet the Expert
—
David Koenen
................................................................................................................
4
Recently published industry standard server technology papers
...............................................................
6
Contact us
..................................................................................................................................................
6
BladeSystem enclosure amperage now in Onboard Administrator v2.30
IT administrators have been able to track the power use per server through Insight Power Manager. But before the release of
Onboard Administrator v2.30, the only way to determine the power use for an enclosure was to calculate it as follows:
Single phase - Amps = watts/voltage
3-phase - Amps = watts/(voltage*1.74), where 1.74 is the 3-phase power factor
Now, through Power Meter in OA v2.30 (see Figure 1-
1), users can track an enclosure’s average power use on the upper
graph and choose to display the power cap and/or the minimum power by using the legend. The pull-down menu above the
graph allows users to view the graph in Watts, BTU/hr, or Amps. The lower two graphs show peak power for both sides of the
enclosure
—
defaulting to Amps
—
but changeable to BTU/hr or Watts.
OA does not have a voltage sensor. Therefore, the pull-down menu in the lower right corner allows users to change the voltage
applied in calculating the Amps. The lower left corner displays 24-hour average, peak, and minimum power readings.
ISS Technology Update
Volume 8, Number 1
Keeping you informed of the latest ISS technology