Compaq CQ2000 Upgrade and Service
Compaq CQ2000 - Desktop PC Manual
View all Compaq CQ2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq CQ2000 manual content summary:
- Compaq CQ2000 | Upgrade and Service - Page 1
Printed in Upgrading and Servicing Guide - Compaq CQ2000 | Upgrade and Service - Page 2
- Compaq CQ2000 | Upgrade and Service - Page 3
Removing and Replacing the Hard Disk Drive Features may vary by model. - Compaq CQ2000 | Upgrade and Service - Page 4
- Compaq CQ2000 | Upgrade and Service - Page 5
drive, you have to perform a system recovery. Refer to the documentation that came with your computer for detailed system recovery steps. IMPORTANT: A hard drive is screwdriver WARNING: 1 Never open the cover with the power cord attached or power applied. You may damage your computer or be injured - Compaq CQ2000 | Upgrade and Service - Page 6
media such as CDs or DVDs from the computer. 2 Turn off the computer using the shutdown procedure for your operating system. 3 Disconnect the power from the wall and disconnect them from the computer. 5 Disconnect the mouse, keyboard, ethernet cable, and/or phone line. 6 Remove the two screws that - Compaq CQ2000 | Upgrade and Service - Page 7
drive cage to the front of the computer. 13 Disconnect the power cable and data cable from the back of the optical drive. Press the release button on the end of the power cable and the data cable while disconnecting these cables from the drive. NOTE: - Compaq CQ2000 | Upgrade and Service - Page 8
of the screws. Set these screws aside for use with the replacement hard disk drive. 18 Press the release button on the end of the power cable and the data cable while disconnecting these cables from the drive. 16 Slide the hard drive to the rear of the computer until it - Compaq CQ2000 | Upgrade and Service - Page 9
due to different manufacturers or models. HP always provides quality parts that meet or exceed your original computer specifications. Please do not return this part because it is different. Follow the steps in this procedure to install your new drive. 1 Remove the two guide screws from the old hard - Compaq CQ2000 | Upgrade and Service - Page 10
4 Place the drive so the guide screws fit into the guide screw slots. The drive manufacturer's label should be visible when the drive is in place. 6 Replace the hard drive retention screws and tighten them. 7 Reconnect the power cable and data cable to the optical disc drive. 5 Push the hard drive - Compaq CQ2000 | Upgrade and Service - Page 11
8 Insert the tabs at the rear of the optical drive and cage assembly into the slots at the rear of the computer. Then lower the front of the drive and cage assembly onto the computer. 11 Insert the tabs on the right side of the bezel into the slots on the right side of the front of the computer. 9 - Compaq CQ2000 | Upgrade and Service - Page 12
13 Align the tabs on the inside edge of the left side panel with the slots in the edge of the left side of the computer case. 15 Replace the screws that secure the side panel to the computer. 14 Slide the left side panel into place. 10 517212-001 - Removing and Replacing the Hard Disk Drive - Compaq CQ2000 | Upgrade and Service - Page 13
517212-001 - Removing and Replacing the Hard Disk Drive 11 - Compaq CQ2000 | Upgrade and Service - Page 14
12 517212-001 - Removing and Replacing the Hard Disk Drive - Compaq CQ2000 | Upgrade and Service - Page 15
Removing and Replacing the Optical Disc Drive Features may vary by model. - Compaq CQ2000 | Upgrade and Service - Page 16
- Compaq CQ2000 | Upgrade and Service - Page 17
You Begin Observe the following requirements before removing and replacing an optical disc (CD/DVD) drive. IMPORTANT: Treat an optical disc drive with care. It components. WARNING: 1 Never open the cover with the power cord attached or power applied. You may damage your computer or be injured from - Compaq CQ2000 | Upgrade and Service - Page 18
such as CDs or DVDs from the computer. 2 Turn off the computer using the shutdown procedure for your operating system. 3 Disconnect the power from the ) and disconnect them from the computer. 5 Disconnect the keyboard, mouse, ethernet cable, and/or phone line. 6 Remove the two screws that fasten - Compaq CQ2000 | Upgrade and Service - Page 19
drive cage to the front of the computer. 13 Disconnect the power cable and data cable from the back of the optical drive. Press the release button on the end of the power cable and the data cable while disconnecting these cables from the drive. NOTE: - Compaq CQ2000 | Upgrade and Service - Page 20
the original part, due to different manufacturers or models. HP always provides quality parts that meet or exceed your original computer specifications. Please do not return this part because it is different. Follow the steps in this procedure to install your new drive. 1 Place the drive cage onto - Compaq CQ2000 | Upgrade and Service - Page 21
3 Replace the four drive cage screws. 6 Replace the two optical drive cage screws. 4 Reconnect the power cable and data cable to the optical drive. 7 Stand the computer upright. 8 Insert the tabs on the right side of the bezel into the slots - Compaq CQ2000 | Upgrade and Service - Page 22
9 Snap the left side of the bezel in place. 11 Slide the left side panel into place. 10 Align the tabs on the inside edge of the left side panel with the slots in the edge of the left side of the computer case. 12 Replace the screws that secure the side panel to the computer. 18 517212-001 - - Compaq CQ2000 | Upgrade and Service - Page 23
- Compaq CQ2000 | Upgrade and Service - Page 24
- Compaq CQ2000 | Upgrade and Service - Page 25
- Compaq CQ2000 | Upgrade and Service - Page 26
Copyright © 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Version: 2.0
Printed in
Upgrading and Servicing Guide