Compaq Evo n1050v Service Manual - Page 113
Required Equipment, Removal Procedure, Removing the Heat Sink with Fan
View all Compaq Evo n1050v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Note This section applies only to HP Pavilion 5300 and 5200, HP nx9010, and Compaq Presario 2500 models. Required Equipment • #0 Phillips screwdriver. Removal Procedure 1. Unplug the AC adapter, if present, and remove the battery. 2. Remove these additional assemblies: • Hard disk drive (page 2-9). • Keyboard cover (page 2-12). • Keyboard (page 2-16). • Switchboard PCA (page 2-18). • Display assembly (page 2-23). • Top case (page 2-26). 3. Disconnect the two fan cables from the motherboard. 4. Remove the four retaining M2.0×5.0 mm screws in the "1", "2", "3", "4" sequence stamped on the heat sink. 5. Lift up on the heat sink (with fan). Figure 2-27. Removing the Heat Sink (with Fan) HP Pavilion 5300 and 5200, HP nx9010, and Compaq Presario 2500 Models 2-42 Removal and Replacement Service Manual