Compaq Mini 730 HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui
Compaq Mini 730 - PC Manual
View all Compaq Mini 730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq Mini 730 manual content summary:
- Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 1
HP Mini 1000 Netbook Compaq Mini 700 Netbook Maintenance and Service Guide - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 2
the U.S. and other countries. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 3
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 4
iv Safety warning notice - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 5
Front components ...8 Right-side components ...9 Left-side components ...10 Bottom components ...11 3 Illustrated parts catalog Serial number replacement procedures Preliminary replacement requirements 29 Tools required ...29 Service considerations ...29 Plastic parts ...29 Cables and connectors - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 6
Equipment guidelines 33 Unknown user password 34 Component replacement procedures 35 Service tag ...35 Device feet ...36 Battery ...37 Memory module ... , BrightView display specifications 75 10.1-inch, standard-definition, AntiGlare display specifications 76 10.2-inch, WSVGA, AntiGlare display - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 7
97 Scheduling backups ...98 Performing a recovery ...98 Initiating a recovery in Windows 98 9 Connector pin assignments Audio-in (microphone) ...99 Audio-out ...99 RJ-45 (network) ...100 Universal Serial Bus ...100 10 Power cord set requirements Requirements for all countries and regions 101 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 8
viii - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 9
1 Product description Category Product Name Processor Chipset Graphics Panels Memory Description HP Mini 1000 Netbook HP Mini 1000 Netbook √ Compaq Mini 700 Netbook Intel® Atom™ N270 1.6-GHz processor, 512-KB √ Level 2 cache, 533-MHz front-side bus (FSB) Northbridge: 945GSE; 533-MHz bus - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 10
also support the HP Mini Mobile Drive Bay Supports all Mini Card slots: √ ● Full-size Mini Card slot ● Half-size Mini Card slot Audio-in (stereo microphone) √ Audio-out (stereo headphone) √ RJ-45 (Ethernet, includes link and activity lights) √ USB (2) √ 3-pin AC power √ Compaq Mini 700 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 11
: Windows® XP Home SP3, ultra low-cost personal √ computer (ULCPC) edition Restore media: Backup software provided by operating system CD √ and recovery DVD Serviceability End-user replaceable parts: AC adapter √ Battery (system) √ Memory module √ HP Mini Mobile Drive √ Compaq Mini 700 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 12
2 External component identification Top components Display Item (1) (2) (3) (4) Component Internal display switch Speakers (2) Internal microphone Webcam Function Turns off the display if the display is closed while the power is on. Produce sound. Records and captures sound. Captures still - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 13
to the section of the Regulatory, Safety and Environmental Notices that applies to your country or region. To access these notices, click Start > Help and Support > User Guides. Top components 5 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 14
used system functions when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with a function key. Displays the Windows Start menu. Displays a shortcut menu for items beneath the pointer. 6 Chapter 2 External component identification - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 15
TouchPad Item Component Function (1) TouchPad on/off button (2) TouchPad on/off light (3) Left TouchPad button * (4) TouchPad * (5) TouchPad scroll zone (6) Right TouchPad button * Turns the TouchPad on and off. ● White: TouchPad is on. ● Amber: TouchPad is off. Functions like the - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 16
the switch to exit Standby. ● When the device is in Hibernation, briefly slide the switch to exit Hibernation. If the device has stopped responding and Windows shutdown procedures are ineffective, slide and hold the power switch for at least 5 seconds to turn off the device. To learn more about your - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 17
. It is normal for the internal fan to cycle on and off during routine operation. Supports the following optional digital card formats: ● MultiMediaCard (MMC) ● Secure Digital (SD) Memory Card Connects an optional USB device. HP Mini Mobile Drive Bay (on models equipped with Connects an optional - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 18
Regulatory, Safety and Environmental Notices. NOTE: When a device is connected to the jack, the device speakers are disabled. RJ-45 (network) jack Connects a network cable. 10 Chapter 2 External component identification - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 19
Bottom components Item (1) (2) (3) Component Battery bay Battery release latches (2) Memory module compartment (4) Vent Function Holds the battery. Release the battery from the battery bay. Contains the memory module slot. NOTE: The release latch for the memory module compartment cover (not - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 20
provides information that may be needed when troubleshooting system problems. The service tag provides the following information: (1) Product service technician to determine what components and parts are needed. (4) Model description: This is the number used to locate documents, drivers, and support - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 21
BrightView (HP Mini 1000) 8.9-inch WSVGA BrightView (Compaq Mini 700) 10.1-inch standard-definition AntiGlare (HP Mini 1000) 10.1-inch standard-definition AntiGlare (red-colored HP Mini 1000) 10.1-inch standard-definition AntiGlare (Compaq Mini 700) 10.2-inch WSVGA AntiGlare (HP Mini 1000) 507309 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 22
Item (2) (3) (4a) (4b) (5) (6) (7a) (7b) (7c) (7d) (7e) (8a) Description Spare part number 10.2-inch WSVGA AntiGlare (red-colored HP Mini 1000) 512140-001 10.2-inch WSVGA AntiGlare (Compaq Mini 700) 512143-001 See Display assembly components on page 17 for more spare part information. - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 23
Item (8b) (9a) (9b) (9c) (9d) (10) (11) (12) (13) (14) (15) Description Spare part number For use number 507708-001. Base enclosure (includes 4 rubber feet) For the HP Mini 1000 and Compaq Mini 700 506337-001 For the red-colored HP Mini 1000 512189-001 Memory module (PC2-4200, 533-MHz, DDR2) - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 24
Item (16) Description Battery (3-cell, 26-Wh Li-Pol) For the HP Mini 1000 and Compaq Mini 700 For the red-colored HP Mini 1000 (for use in all countries and regions except Germany) For the red-colored HP Mini 1000 (for use in Germany only) Spare part number 504610-001 512851-001 512851-002 16 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 25
(includes left and right cables) (3) Display bezel For use with 8.9-inch panels on the HP Mini 1000 For use with 8.9-inch panels on the Compaq Mini 700 For use with 10.1-inch panels on the Compaq Mini 700 Spare part number 506338-001 506335-001 506333-001 509701-001 509704-001 Display assembly - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 26
panels 504596-001 For use with 10.1-inch panels on the Compaq Mini 700 515207-001 (6) Display panel 8.9-inch WSVGA BrightView for the HP Mini 1000 and the Compaq Mini 700 509698-001 10.1-inch standard-definition AntiGlare for the Compaq Mini 700 509703-001 (7) Display Cable Kit (includes - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 27
Cable Kit Item Description Cable Kit: (1) SIM card cable (2) Power cable (3) Internal display switch module (4) Bluetooth cable (5) USB cable Spare part number 507708-001 Cable Kit 19 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 28
Mass storage devices NOTE: Each hard drive spare part kit and solid-state drive spare part kit includes a cable and bracket. Item Description Mass storage devices: (1) Hard drive (select models only): 60-GB, 4200-rpm Hard Drive Hardware Kit (not illustrated) (2) Solid-state drive 16-GB 8-GB Spare - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 29
Plastics Kit Item Description Plastics Kit: For the HP Mini 1000 and Compaq Mini 700 For the red-colored HP Mini 1000 (1) Memory module compartment cover (2) HP Mini Mobile Drive Bay cover (3) Security cable connector (4) SD Card Reader slot bezel Spare part number 507317-001 512192-001 Plastics - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 30
bracket ● WWAN connector bracket 507318-001 HP Mini Mobile Drive (supported on models equipped with a solid-state drive and HP Mini Mobile Drive Bay) 2-GB 512329-001 4-GB 512330-001 8-GB HP Mini Sleeve For the HP Mini 1000 For the red-colored HP Mini 1000 512331-001 512321-001 511844-001 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 31
Description Screw Kit ● Phillips PM1.6×2.5 screw ● Phillips PM1.6×4.0 screw ● Phillips PM1.6×6.0 screw ● Phillips PM2.0×3.0 screw ● Phillips PM2.0×4.5 screw ● Phillips PM2.5×5.0 screw ● Phillips PM2.5×7.0 screw 30-W UMA AC adapter For use in all countries and regions except Germany For use in - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 32
only) 490371-AR1 Power cord for use in South Africa 490371-D01 Power cord for use in Argentina (HP Mini 1000 only) 490371-D61 Power cord for use in India (HP Mini 1000 only) 496813-001 30-W UMA AC adapter for use in all countries and regions except Germany 504592-001 System board equipped - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 33
-001 3-cell, 26-Wh Li-Pol battery for the HP Mini 1000 and Compaq Mini 700 504611-001 Keyboard for use in the United States 504611-031 Keyboard for use in the United Kingdom (Compaq Mini 700 only) 504611-041 Keyboard for use in Germany (Compaq Mini 700 only) 504611-051 Keyboard for use in France - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 34
Compaq Mini 700 Speaker grill for the HP Mini 1000 and Compaq Mini 700 8.9-inch WSVGA BrightView display assembly for the HP Mini 1000 (includes 1 webcam, 1 microphone, 1 speaker box, and 2 WLAN antenna transceivers/cables; WWAN is optional) 10.2-inch, WSVGA, AntiGlare display assembly for the HP - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 35
) for use with 8.9-inch, 10.1-inch, and 10.2-inch panels on the Compaq Mini 700 10.1-inch standard-definition AntiGlare display panel for the Compaq Mini 700 Display bezel for use with 10.1-inch panels on the Compaq Mini 700 HP Mini Sleeve for the red-colored HP Mini 1000 10.2-inch, WSVGA, AntiGlare - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 36
Rubber Kit for use with 10.1-inch panels on the Compaq Mini 700 Display Screw Kit for use with 10.1-inch panels on the Compaq Mini 700 Foil shield for use with 10.1-inch display panels on the Compaq Mini 700 Webcam module for use with 10.1-inch panels on the Compaq Mini 700 NOTE: The webcam module - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 37
plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions. Cables and connectors CAUTION: When servicing the device, be sure that cables are placed in their proper locations during the reassembly process. Improper cable - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 38
Drive handling CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the device, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the device. If you are unsure whether the device is off or - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 39
: A product can be degraded by as little as 700 V. Event Walking across carpet Walking across vinyl floor Motions in foam-lined box Typical electrostatic voltage levels Relative humidity 10% 40% 35,000 V 15,000 V 12,000 V 5,000 V 6,000 V 800 V 2,000 V 700 V 11,500 V 4,000 V 14,500 V - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 40
work surface and use properly grounded tools and equipment. ● Use conductive field service tools, such as cutters, screwdrivers, and vacuums. ● When fixtures must directly input signals before inserting or removing connectors or test equipment. 32 Chapter 4 Removal and replacement procedures - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 41
a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly or floor mats with hard ties to the ground ● Field service kits ● Static awareness labels ● Material-handling packages ● Nonconductive - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 42
Unknown user password If the device you are servicing has an unknown user password, follow these steps to clear the password: NOTE: These steps also clear CMOS. 1. Shut down the device. If you are - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 43
provides information that may be needed when troubleshooting system problems. The service tag provides the following information: (1) Product service technician to determine what components and parts are needed. (4) Model description: This is the number used to locate documents, drivers, and support - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 44
Device feet The device feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare part number 504613-001. There are 4 rubber feet that are installed on the base enclosure in the locations illustrated below. 36 Chapter 4 Removal and replacement procedures - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 45
Description 3-cell, 26-Wh Li-Pol battery for the HP Mini 1000 and Compaq Mini 700 3-cell, 26-Wh Li-Pol battery for the red-colored HP Mini 1000 (for use in all countries and regions except Germany) 3-cell, 26-Wh Li-Pol battery for the red-colored HP Mini 1000 (for use in Germany only) Spare part - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 46
compartment cover is included in the Plastics Kit, spare part number 512192-001 for the red-colored HP Mini 1000 or 507317-001 for all other models of the HP Mini 1000 and the Compaq Mini 700. 3. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 47
4. Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot. Reverse this procedure to install a memory module. Component replacement procedures 39 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 48
part number listing on page 24. Description For use with standard device models Spare part number 504611-xx1 Description For use with red-colored HP Mini 1000 models only Spare part number 509650-xx1 Before removing the keyboard, follow these steps: 1. Shut down the device. If you are unsure - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 49
4. Grasp the tabs (1) on the outer edges of the keyboard and lift the rear edge (2) until the keyboard rests at an angle. Then slide the keyboard back until it rests on the display assembly (3). 5. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached. 6. - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 50
Mass storage devices NOTE: Each hard drive spare part kit and solid-state drive spare part kit includes a cable and bracket. Description 8-GB solid-state drive 16-GB solid-state drive 60-GB, 4200-rpm hard drive Spare part number 507313-001 507314-001 504601-001 Before removing the hard drive or - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 51
6. Lift the hard drive (4) up and slide it out of the drive bay. Reverse this procedure to install the hard drive. To remove the solid-state drive: 1. Release the ZIF connector (1) to which the SIM card cable is attached. The end of the cable lies across the top of the solid-state drive. 2. - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 52
6. Remove the drive bracket (4) from the drive bay. 7. Remove the three Phillips PM2.0×3.0 screws (1) that secure the solid-state drive to the bracket. 8. Remove the solid-state drive (2) from the bracket. Reverse this procedure to install the solid-state drive. 44 Chapter 4 Removal and replacement - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 53
Top cover Description Top cover (includes TouchPad) Spare part number 504612-001 Before removing the top cover, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 54
5. Open the device as far as possible. 6. Remove the Phillips PM2.0×4.5 screw (1) and the Phillips PM2.5×5.0 screw (2) that secure the top cover to the base enclosure. 7. Lift the rear edge of the top cover (1) and swing it up. Then slide the top cover back slightly to rest against the display - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 55
9. Disconnect the TouchPad button board cable (2) from the system board, and then remove the top cover. Reverse this procedure to install the top cover. Component replacement procedures 47 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 56
. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support through Help and Support. Before removing the WLAN module, follow these steps: 1. Shut down the device. If you are unsure whether the device is off - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 57
Remove the WLAN module: 1. Detach the black Mylar covering (not illustrated) that surrounds the fan. 2. Several system cables are routed through a channel between the fan and the battery bay. Detach the black tape from the cables. 3. Disconnect the wireless antenna cables (1) from the terminals on - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 58
WWAN module Description HP un2400 Mobile Broadband Module Spare part number 483377-002 a warning message, remove the module to restore device functionality, and then contact technical support through Help and Support. Before removing the WWAN module, follow these steps: 1. Shut down the device. - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 59
Remove the WWAN module: 1. Detach the black Mylar covering from the WWAN module. The covering is secured by adhesive. 2. Detach the aluminum foil and tape (not illustrated) from the wireless antenna cables, and then disconnect the wireless antenna cables (1) from the terminals on the WWAN module. - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 60
RTC battery Description RTC battery Spare part number 507707-001 NOTE: Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all passwords and CMOS settings to be cleared. Before removing the real-time clock (RTC) battery, follow these steps: 1. Shut down the device. If - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 61
Bluetooth module NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is included in the Cable Kit, spare part number 507708-001. Description Bluetooth module Spare part number 507706-001 Before removing the Bluetooth module, follow these - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 62
System board NOTE: The system board spare part kit includes a processor and replacement thermal material. Description System board equipped with 1.6-GHz processor Spare part number 504592-001 Before removing the system board, follow these steps: 1. Shut down the device. If you are unsure whether - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 63
3. Disconnect the following cables from the system board: (1) Speaker cables (2) Microphone cable (3) Fan cable (4) Power cable (5) Display panel cable 4. Remove the two Phillips PM1.6×2.5 screws (1) that secure the actuators for the power switch and wireless on/off switch to the system board. 5. - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 64
7. Remove the USB connector bracket (2). NOTE: The USB connector bracket is included in the Bracket Kit, spare part number 507318-001. 8. Remove the Phillips PM2.0×4.5 screw that secures the system board to the base enclosure. 56 Chapter 4 Removal and replacement procedures - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 65
9. Grasp the system board at its midpoint (1) and lift the right side (2) up. Then remove the system board (3) from the base enclosure. Reverse the procedure to install the system board. Heat sink assembly NOTE: The heat sink assembly spare part kit includes replacement thermal material. - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 66
assembly is removed. Thermal paste is used on the processor (1), the heat sink section (2) that services the processor, the Northbridge chip (3), and the heat sink section (4) that services the Northbridge chip. Replacement thermal material is included with all heat sink assembly and system board - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 67
Fan Description Fan Spare part number 504615-001 NOTE: To properly ventilate the device, allow at least a 7.6-cm (3-inch) clearance on the left side of the device. The device uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 68
3. Remove the fan (3). Reverse this procedure to install the fan. 60 Chapter 4 Removal and replacement procedures - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 69
USB board and internal display switch NOTE: The internal display switch module is included in the Cable Kit, spare part number 507708-001. Description USB board Spare part number 506336-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 70
4. Detach the SIM card cable (3). The SIM card cable is attached to the battery bay with tape. Reverse this procedure to install the USB board. If it is necessary to replace the internal display switch module, perform the following steps: 1. Remove the Phillips PM2.0×3.0 screw (1) that secures the - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 71
(Compaq Mini 700) 10.1-inch standard-definition AntiGlare (HP Mini 1000) 10.1-inch standard-definition AntiGlare (red-colored HP Mini 1000) 10.1-inch standard-definition AntiGlare (Compaq Mini 700) 10.2-inch WSVGA AntiGlare (HP Mini 1000) 10.2-inch WSVGA AntiGlare (red-colored HP Mini 1000) 10 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 72
. All display assembly subcomponent screws are available in the Display Screw Kit, spare part number 509700-001 for all 8.9-inch panels or 515211-001 for 10.1-inch panels (Compaq Mini 700 only). 64 Chapter 4 Removal and replacement procedures - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 73
(2). The hinges are available in the Display Hinge Kit, spare part number 504596-001 for all 8.9-inch panels or 515207-001 for 10.1-inch panels (Compaq Mini 700 only). 5. If it is necessary to replace the display bezel, perform the following steps: a. Flex the inside edges of the bottom (1), left - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 74
bezel (4). The spare part numbers for the 8.9-inch display bezels are 506333-001 (HP Mini 1000) and 509701-001 (Compaq Mini 700). The spare part number for the 10.1-inch display bezel is 509704-001 (Compaq Mini 700 only). 6. If it is necessary to replace the webcam module, perform the following - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 75
the webcam module (2). The webcam module is available as spare part number 504594-001 for all 8.9-inch panels or 515213-001 for 10.1-inch panels (Compaq Mini 700 only). 7. If it is necessary to replace the display panel, perform the following steps: a. Remove the nine Phillips PM2.0×3.0 screws that - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 76
Remove the display panel (3) from the display enclosure. An 8.9-inch display panel for the HP Mini 1000 and the Compaq Mini 700 is available as spare part number 509698-001. A 10.1-inch display panel for the Compaq Mini 700 only is available as spare part number 509703-001. 8. If it is necessary to - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 77
the Display Cable Kit, spare part number 504597-001 (with WLAN) or 504598-001 (with WWAN). The wireless antenna transceivers and cables for 10.1-inch panels (Compaq Mini 700 only) are available in the Display Cable Kit, spare part number 515208-001 (with WLAN) or 515209-001 (with WWAN). Reverse this - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 78
Utility Starting the Setup Utility The Setup Utility is a ROM-based information and customization utility that can be used even when your Windows operating system is not working. The utility reports information about the device and provides settings for startup, security, and other preferences. To - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 79
Navigating and selecting in the Setup Utility Because the Setup Utility is not Windows based, it does not support the TouchPad. Navigation and selection are by keystroke. ● To choose a menu or a menu item, use the arrow keys. ● To choose an item in a list or - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 80
, and then press enter. After either choice, the device restarts in Windows. Setup Utility menus The menu tables in this section provide an overview of of the Setup Utility menu items listed in this chapter may not be supported by your device. Main menu Select System information To do this ● - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 81
Support f12 functions of the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20). ● Internal Network Adapter boot-Enable/disable boot from Internal Self Test (select models only) Memory Test To do this Run a comprehensive self-test on the hard drive. Run a diagnostic test on the - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 82
in. LCD, equipped with a 3-cell battery, 60-GB hard drive, 1.11 kg 1-GB memory, WLAN module, and 2 wireless antennae 10.30 in 0.99 in 2.45 lb 10.2-in. LCD, equipped with a 3-cell battery, 8-GB solid-state 1.09 kg drive, 1-GB memory, WLAN module, and 2 wireless antennae 8.9-in. LCD, equipped with - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 83
8.9-inch, WSVGA, BrightView display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Metric U.S. 11.34 cm 19.51 cm 22.61 cm 262,144 300:1 ( - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 84
10.1-inch, standard-definition, AntiGlare display specifications Dimensions Height Width 23.45 cm 14.30 cm 25.55 cm 262,144 400:1 (typical) 200 nits (typical) 9.23 in 5.62 in 10.05 in 0.2175 × 0.2175 mm 1024 × 576 RGB vertical stripe Edge lit 80 × 25 3.2 W +/-45° horizontal, + - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 85
10.2-inch, WSVGA, AntiGlare display specifications Dimensions Height Width Diagonal Number of colors Contrast 22.27 cm 25.55 cm 262,144 400:1 (typical) 200 nits (typical) 4.93 in 8.77 in 10.06 in 0.2175 × 0.2175 mm 1024 × 576 RGB vertical stripe Edge lit 80 × 25 3.0 W +/-40° horizontal, +20/- - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 86
referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly. NOTE: Certain restrictions and exclusions apply. Contact technical support for details. 78 Chapter 6 Specifications - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 87
Solid-state drive specifications Performance Transfer modes supported Sustained read Sustained write Characteristics Interface MLC NAND flash capacity Electrical specifications DC supply voltage Standby current Active current Environmental specifications Operating temperature Storage temperature - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 88
/g WLAN no. 2 Intel 82801G (ICH7 Family) PCI Express Root Port-27D0 Intel 82801G (ICH7 Family) USB Universal Host Controller-27CB Microsoft UAA Bus Driver for High Definition Audio Mobile Intel 945 Express Chipset Family Intel 82801G (ICH7 Family) PCI Express Root Port-27D2 Intel 82801G (ICH7 Family - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 89
System I/O address specifications I/O address (hex) 000 - 00F 000 - CF7 010 - 01F 020 - 021 022 - 03F 040 - 043 044 - 05F 060 - 060 061 - 061 062 - 062 063- 063 064 - 064 065 - 065 066 - 066 067 - 06F 070 - 071 072 - 07F 080 - 080 081 - 083 084 - 086 087 - 087 088 - 088 089 - 08B 08C - 08E 08F - - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 90
I/O address (hex) 279 - 279 3B0 - 3BB 3C0 - 3DF 3F6 - 3F6 400 - 41F 480 - 4BF 4D0 - 4D1 500 - 501 800 - 87F A79 - A79 0D00 - FFFF D480 - D49F D800 - D81F D880 - D89F DC00 - DC1F DC80 - DC87 E000 - EFFF FFA0 - FFAF System function (shipping configuration) ISAPNP Read Data Port Mobile Intel® 945 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 91
resources PCI bus Mobile Intel 945 Express Chipset Family Intel 82801G (ICH7 Family) USB2 Enhanced Host Controller-27CC Microsoft® UAA Bus Driver for High Definition Audio Mobile Intel 945 Express Chipset Family Mobile Intel 945 Express Chipset Family Intel 82801G (ICH7 Family) PCI Express - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 92
504614-001; or in the Display Screw Kit, spare part number 509700-001 for all 8.9-inch panels or 515211-001 for 10.1-inch panels (Compaq Mini 700 only). Phillips PM1.6×2.5 screw Color Silver Quantity 4 Length 2.5 mm Thread 1.6 mm Head diameter 3.0 mm Where used: Two screws that secure the - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 93
Where used: Two screws that secure the heat sink to the system board Phillips PM1.6×4.0 screw Color Silver Quantity 1 Length 4.0 mm Thread 1.60 mm Head diameter 3.5 mm Where used: One screw that secures the keyboard to the device Phillips PM1.6×4.0 screw 85 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 94
Phillips PM1.6×6.0 screw Color Black Quantity 1 Length 6.0 mm Thread 1.60 mm Head diameter 3.5 mm Where used: One screw that secures the keyboard to the device 86 Chapter 7 Screw listing - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 95
Phillips PM2.0×3.0 screw Color Black Quantity 24 (WLAN only) 25 (with WWAN) Length 3.0 mm Thread 2.0 mm Head diameter 4.0 mm Where used: Three screws that secure the solid-state drive to its bracket Where used: One screw that secures the WLAN module to the system board Phillips PM2.0×3.0 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 96
Where used: One screw that secures the WWAN connector bracket to the system board Where used: Two screws that secure the USB connector bracket to the system board Where used: One screw that secures the fan to the base enclosure 88 Chapter 7 Screw listing - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 97
Where used: One screw that secures the DC jack bracket to the base enclosure Where used: One screw that secures the internal display switch bracket to the base enclosure Where used: Two screws that secure the webcam module to the display enclosure Phillips PM2.0×3.0 screw 89 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 98
Where used: Nine screws that secure the display panel to the display enclosure Where used: Four screws that secure the left and right display panel brackets to the display panel 90 Chapter 7 Screw listing - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 99
Phillips PM2.0×4.5 screw Color Silver Quantity 10 Length 4.5 mm Thread 2.0 mm Head diameter 4.0 mm Where used: Two screws that secure the hard drive to the device Where used: Two screws that secure the solid-state drive bracket to the device Phillips PM2.0×4.5 screw 91 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 100
Where used: One screw that secures the top cover to the device Where used: One screw that secures the fan and DC jack bracket to the base enclosure Where used: Two screws that secure the speaker assembly to the display enclosure 92 Chapter 7 Screw listing - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 101
Where used: Four screws that secure the display hinges to the display assembly Phillips PM2.5×5.0 screw Color Silver Quantity 4 Length 5.0 mm Thread 2.5 mm Head diameter 4.5 mm Where used: Four screws that secure the display assembly and top cover to the device Phillips PM2.5×5.0 screw 93 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 102
Phillips PM2.5×7.0 screw Color Black Quantity 4 Length 7.0 mm Thread 2.5 mm Head diameter 4.0 mm Where used: Four screws that secure the top cover to the base enclosure 94 Chapter 7 Screw listing - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 103
up. HP recommends that you use the Windows backup utility to create a hard drive backup as soon as you set up your device. With the Windows backup specific intervals or events NOTE: The Windows backup utility backs up only data files. The operating system, drivers, and programs are located on the - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 104
document: 1. Display the screen you want to save. 2. Copy the screen image: To copy only the active window, press alt+fn+prt sc. To copy the entire screen, press fn+prt sc. 3. Open a word- files and settings, and then click Next. 4. Follow the on-screen instructions. 96 Chapter 8 Backup and recovery - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 105
click Next. 5. Follow the on-screen instructions. Creating recovery points When you back up system of changes made after that time. HP recommends that you create recovery points Accessories > System Tools > System Restore. The System Restore window opens. 2. Click Create a new restore point, and - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 106
a recovery in Windows, follow these steps: 1. If possible, back up all personal files. 2. Select Start > All Programs > Accessories > System Tools > Backup. The Backup or Restore Wizard page opens. 3. Click Restore files and settings, and then click Next. 4. Follow the on-screen instructions. 98 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 107
9 Connector pin assignments Audio-in (microphone) Pin Signal 1 Audio signal in 2 Audio signal in 3 Ground Audio-out (headphone) Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3 Ground Audio-in (microphone) 99 - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 108
RJ-45 (network) Pin Signal 1 Transmit + 2 Transmit - 3 Receive + 4 Unused 5 Unused 6 Receive - 7 Unused 8 Unused Universal Serial Bus Pin Signal 1 +5 VDC 2 Data - 3 Data + 4 Ground 100 Chapter 9 Connector pin assignments - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 109
● All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country or region where the power cord set will be used. ● The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage rating of 125 or 250 V AC, as - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 110
must bear the certification mark of the agency responsible for evaluation in the country or region where it will be bear the certification mark of the agency responsible for evaluation in the country or region where it will be evaluation in the country or region where it will be used. 102 Chapter - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 111
remove these components, handle them carefully. NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly that site at http://www.eiae.org. This section provides disassembly instructions for the display assembly. The display assembly must be disassembled - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 112
Perform the following steps to disassemble the display assembly: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. 2. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 113
4. Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). 5. Remove all screws (1) that secure the display panel assembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclosure. 7. Turn the display panel assembly upside - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 114
10. Remove the display panel frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 115
15. Remove the backlight cables (1) from the clip (2) in the display panel. 16. Turn the display panel upside down. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. 17. Remove the - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 116
18. Remove the backlight from the backlight frame. 19. Disconnect the display panel cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display rear panel. 21. Release the LCD panel (3) from the display rear panel. 22. Release the tape (4) that secures the LCD - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 117
29 chipset, product description 1 CMOS clearing 34 components bottom 11 front 8 keys 6 left-side 10 pointing device 7 right-side 9 top 4 TouchPad 7 wireless antennae 5 connectors power 10 service considerations 29 D device feet locations 36 spare part number 36 device specifications 74 diskette - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 118
applications 6 Windows logo 6 H hard drive precautions 30 product description 2 removal 42 spare part number 14, 25, 42 specifications 78 Hard Drive Hardware Kit, spare part number 14, 25 headphone jack location 10 pin assignments 99 heat sink assembly removal 57 spare part number 57 HP Mini Mobile - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 119
/replacement preliminaries 29 procedures 35 right-side components 9 RJ-45 jack location 10 pin assignments 100 RTC battery removal 52 spare part number 15, 26, description 3 serial number 12, 35 service considerations 29 service tag 12, 35 serviceability, product description 3 Setup Utility accessing - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 120
applications key 6 Windows logo key 6 wireless antenna locations 5 removal 69 spare part number 18, 69 wireless antenna components 5 wireless light 8 wireless module, product description 2 wireless switch 8 WLAN module - Compaq Mini 730 | HP Mini 1000 and Compaq Mini 700 - Maintenance and Service Gui - Page 121
HP Mini 1000 Netbook
Compaq Mini 700 Netbook
Maintenance and Service Guide