Compaq Presario 8000 Compaq Presario S0000 / 8000 Series Computers User's Guid - Page 108
reassembling the diskette adapter
View all Compaq Presario 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
reconnecting the hard disk drive cables reconnecting the optical drive cables NOTE: An optical drive for the 8000 series may include a sound cable. Connect this cable also. 4 Complete the procedure described in "reassembling the pc" on page 107. 5 Turn on the PC. reassembling the diskette adapter To replace or add a new diskette (floppy) drive on the 8000 series, you need to reassemble the adapter around the diskette drive. (The S0000 series does not need an adapter.) 1 Lower the diskette drive into the adapter (1). Ensure that the holes are aligned, and reinstall the screws (2) that secure the diskette drive to the adapter. 2 Press inward on each side of the bracket brace (3), and lower the bracket until it snaps into place over the diskette drive. Ensure that the guide screws (4) are installed in the adapter. upgrading and servicing the pc 101