Compaq ProLiant 1000 Microsoft Windows Event ID and SNMP Traps Reference Guide
Compaq ProLiant 1000 Manual
View all Compaq ProLiant 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq ProLiant 1000 manual content summary:
- Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 1
Microsoft Windows Event ID and SNMP Traps Reference Guide For use with SmartStart version 8.25 Part number: 347870-009 Ninth edition: June 2009 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 2
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP ®, Windows®, Windows NT®, and Windows Server® are U.S. registered trademarks of Microsoft Corporation. - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 3
-774 ...29 Event Identifiers 1061-1098 ...32 Event Identifiers 1101-1199 ...38 Event Identifiers 1200-1294 ...64 Event Identifiers 1343-4613 ...77 Server agents...82 Event Identifiers 256-774 ...82 Event Identifiers 1024-1092 ...85 Event Identifiers 1103-1183 ...93 Event Identifiers 1539-3352 ...124 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 4
with SNMP traps, which are generated by the HP Insight Management Agents for Servers for Windows®. Each event entry has the corresponding Message Source, Event Symptom, and Supporting SNMP Trap Data. Windows NT® event log format The following pages contain HP Insight Management events that are - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 5
: • In the United States, see the HP US service locator webpage, http://www.hp.com/service_locator. • In other locations, see the HP website, http://www.hp.com. For HP technical support: • In North America: ○ Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7 days - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 6
insertion string is: %1. The data contains the error code. Event identifier: cpqhsmsg.dll - 257 (Hex)0x84350101 (Service Event) Log Severity: Warning (2) Log Message: The Foundation Agents service could not allocate memory. The data contains the error code. Event identifier: cpqhsmsg.dll - 258 (Hex - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 7
invalid state for agent "%1". The data contains the state. Event identifier: cpqhsmsg.dll - 269 (Hex)0x8435010d (Service Event) Log Severity: Warning (2) Log Message: The Foundation Agents service could not stop agent "%1". The data contains the error code. Event identifier: cpqhsmsg.dll - 270 (Hex - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 8
Information (1) Log Message: The Foundation Agents could not find the SNMP service. Please install the SNMP service to enabled remote management of the server. Event identifier: cpqhsmsg.dll - 768 (Hex)0x84350300 (Service Event) Log Severity: Warning (2) Log Message: The Host Remote Alerter detected - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 9
error code. Event identifier: cpqhsmsg.dll - 774 (Hex)0xc4350306 (Service Event) Log Severity: Error (3) Log Message: The Host Remote Alerter .MIB Symptom: Generic trap. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHoGenericData Supporting SNMP Trap Description: "[cpqHoGenericData]" - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 10
within the variable list are those of the alarm entry that generated this trap. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqMeAlarmVariable • cpqMeAlarmSampleType • cpqMeAlarmValue • cpqMeAlarmFallingThreshold • cpqMeAlarmOwner • cpqMeAlarmSeverity • cpqMeAlarmExtendedDescription - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 11
of the alarm entry that generated this trap. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • process has either started or stopped running. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHoSwRunningTrapDesc Supporting SNMP Trap Description: "[cpqHoSwRunningTrapDesc]" NT Event - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 12
of the cluster resource name, and then check the resource for the cause of the failure. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqClusterResourceName Supporting SNMP Trap Description: "Cluster resource [cpqClusterResourceName] has failed." NT Event ID: 1169 (Hex)0x84350491 (cpqhsmsg - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 13
node name, and then check the node for the cause of the degraded condition. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqClusterNodeName Supporting SNMP Trap Description: "Cluster service on [cpqClusterNodeName] has become degraded." NT Event ID: 1172 (Hex)0xc4350494 (cpqhsmsg.dll) Log - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 14
CPQWINOS.MIB Symptom: The Processor Time performance property is set to critical. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqOsCpuIndex • cpqOsCpuInstance • cpqOsCpuTimePercent Supporting SNMP Trap Description: "The Processor performance Instance, [cpqOsCpuInstance] is critical with - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 15
.MIB Symptom: The Cache CopyReadHits performance property is set to critical. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqOsCacheIndex • cpqOsCacheInstance • cpqOsCacheCopyReadHitsPercent Supporting SNMP Trap Description: "The Cache performance property is critical with CopyReadHits - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 16
LogicalDisk BusyTime performance property is set to degraded. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqOsLogicalDiskIndex • cpqOsLogicalDiskInstance • cpqOsLogicalDiskBusyTimePercent Supporting SNMP Trap Description: "The LogicalDisk performance instance, [cpqOsLogicalDiskInstance - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 17
Supporting SNMP Trap Description: "[cpqHoCriticalSoftwareUpdateData]" Event identifier: cpqhsmsg.dll - 1792 (Hex)0x84350700 (Service Event trap. This can be caused by a failure in the Remote Access Service or by a missing or invalid configuration. Use the Management Agents control - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 18
from the registry. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 2056 (Hex)0x84350808 (Service Event) Log Severity: Warning (2) Log Message: Unable to create thread. This error can be caused by - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 19
acquire the current process list. This error can be caused by a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 2101 (Hex)0x84350835 (Service Event) Log Severity: Warning (2) Log Message: Unable to acquire the CPU performance data. This error can - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 20
Log Severity: Warning (2) Log Message: The Threshold Agent SNMP request failed. The data contains the error code. Action: 1) Be sure that the SNMP service is configured to allow SNMP requests from "localhost". 2) Be sure that there is an adequate amount of free memory. Event identifier: cpqhsmsg.dll - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 21
sub-key: "%1". This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 3075 (Hex)0x84350c03 (Service Event) Log Severity: Warning (2) Log Message: Unable to read "%1" from the registry. This error can be - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 22
sub-key: "%1". This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 3843 (Hex)0x84350f03 (Service Event) Log Severity: Warning (2) Log Message: Could not read the registry sub-key: "%1". This error can - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 23
Event) Log Severity: Information (1) Log Message: Resource status is online. Event identifier: cpqhsmsg.dll - 3861 (Hex)0x44350f15 (Service Event) Log Severity: Information (1) Log Message: Resource status is offline. The resource has failed or was taken offline by a cluster administrator. Event - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 24
off-line. The Agent only supports the disk resource class. Event identifier: cpqhsmsg.dll - 3874 (Hex)0x84350f22 (Service Event) Log Severity: Warning memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 3875 (Hex)0x84350f23 (Service Event) Log Severity: - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 25
: The External Status MIB Agent could not set an event. The data contains the error code. Event identifier: cpqhsmsg.dll - 4360 (Hex)0x84351108 (Service Event) Log Severity: Warning (2) Log Message: The External Status MIB Agent could not create its main thread of execution. The data contains the - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 26
got an unexpected error code while waiting for an event. The data contains the error code. Event identifier: cpqhsmsg.dll - 4363 (Hex)0x8435110b (Service Event) Log Severity: Warning (2) Log Message: The External Status MIB Agent did not respond to a request. The data contains the error code. Event - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 27
a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 4623 (Hex)0x8435120f (Service Event) Log Severity: Warning (2) Log Message: The Agent could not access WMI. The WMI support may have not been started or installed. Restart or - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 28
or may still be in the starting state. Event identifier: cpqhsmsg.dll - 4626 (Hex)0x84351212 (Service Event) Log Severity: Warning (2) Log Message: The Agent failed to process the MOF file to get the data from WMI. Problem with WMI service or MOF file or wrong file paths used. Foundation agents 28 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 29
The insertion string is: %1. The data contains the error code. Event identifier: cpqstmsg.dll - 257 (Hex)0x84350101 (Service Event) Log Severity: Warning (2) Log Message: The Storage Agents service could not allocate memory. The data contains the error code. Event identifier: cpqstmsg.dll - 258 (Hex - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 30
load the module "%1". The data contains the error code. Event identifier: cpqstmsg.dll - 265 (Hex)0x84350109 (Service Event) Log Severity: Warning (2) Log Message: The Storage Agents service could get the control function for module "%1". The data contains the error code. Event identifier: cpqstmsg - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 31
or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 526 (Hex)0x8435020e (Service Event) Log Severity: Warning (2) Log Message: Unsupported storage system. The ProLiant storage system %1 is not supported by this version of the Storage Agents - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 32
Agent detected an error while attempting to log an alert remotely. The data contains the error code. Event identifier: cpqstmsg.dll - 771 (Hex)0x84350303 (Service Event) Log Severity: Warning (2) Log Message: The Remote Alerter Agent was unable to log an event in the event log of the system named - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 33
of a drive array logical drive. The variable cpqDaLogDrvStatus indicates the current logical drive status. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaLogDrvStatus Supporting SNMP Trap Description: "Status is now [cpqDaLogDrvStatus]." NT Event ID: 1063 (Hex)0xc4350427 (cpqstmsg - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 34
. User Action: If the physical drive status is failed(3) or predictiveFailure(4), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaPhyDrvStatus • cpqDaPhyDrvCntlrIndex • cpqDaPhyDrvBusNumber • cpqDaPhyDrvBay • cpqDaPhyDrvModel • cpqDaPhyDrvFWRev • cpqDaPhyDrvSerialNum - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 35
. If data was being stored in the accelerator cache memory when the server lost power, that data has been lost. User Action: Verify that no data has been lost. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrSlot • cpqDaCntlrModel • cpqDaAccelSerialNumber • cpqDaAccelTotalMemory - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 36
in the controller status of a SCSI Controller. The variable cpqScsiCntlrStatus indicates the current controller status. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqScsiCntlrStatus Supporting SNMP Trap Description: "Status is now [cpqScsiCntlrStatus]." NT Event ID: 1069 (Hex)0xc435042d - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 37
current fan status. User Action: If the fan status is degraded or failed, replace any failed fans. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxFanStatus Supporting SNMP Trap Description: "Storage System fan status changed to [cpqSsBoxFanStatus]." NT Event ID: 1076 (Hex)0xc4350434 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 38
by the administrator. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxTempStatus Supporting SNMP Trap Description: "Storage System temperature ok." Event identifier: cpqstmsg.dll - 1098 (Hex)0x4435044a (Service Event) Log Severity: Information (1) Log Message - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 39
air flow changes caused by the missing side panel. User Action: Replace the storage system side panel. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxSidePanelStatus Supporting SNMP Trap Description: "Side panel is removed from unit." NT Event ID: 1102 (Hex)0x4435044e (cpqstmsg.dll - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 40
to have a cleaning tape inserted and run. This causes the tape drive heads to be cleaned. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqTapePhyDrvCondition Supporting SNMP Trap Description: "Status is now [cpqTapePhyDrvCondition]." NT Event ID: 1120 (Hex)0x84350460 (cpqstmsg.dll) Log - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 41
for replacement. For detailed information on a component replacement, see the appropriate Maintenance and Service Guide. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqIdeIdentIndex Supporting SNMP Trap Description: "IDE drive [cpqIdeIdentIndex] has become degraded." NT Event ID: 1122 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 42
status. User Action: If the physical drive status is threshExceeded(4), predictiveFailure(5) or failed(6), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqFcaPhyDrvBusNumber • cpqFcaPhyDrvBay • cpqFcaPhyDrvStatus Storage agents 42 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 43
Action: If the spare drive status is failed, replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqFcaSpareBusNumber • cpqFcaSpareBay • cpqFcaSpareStatus Supporting SNMP Trap Description: "Spare Status is now [cpqFcaSpareStatus] on bus - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 44
SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqFcaAccelBoxIoSlot • cpqFcaCntlrModel • cpqFcaAccelSerialNumber • cpqFcaAccelTotalMemory Supporting SNMP Trap Description: "Accelerator lost battery power. Data Loss possible." NT Event ID: 1150 (Hex)0xc435047e - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 45
box has been lost. Check the storage box and all fibre channel connections for problems. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqFcaCntlrBoxIoSlot • cpqFcaCntlrStatus • cpqFcaCntlrModel • cpqFcaCntlrSerialNumber • cpqFcaAccelTotalMemory - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 46
Action: If the power supply status is failed, restore power or replace the failed power supply. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqSsPowerSupplyBay • cpqSsPowerSupplyStatus • cpqSsPowerSupplySerialNumber • cpqSsPowerSupplyBoardRevision - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 47
as soon as possible. Be sure that the storage system environment is being cooled properly and that no components are overheated. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqSsTempSensorLocation • cpqSsTempSensorStatus • cpqSsTempSensorCurrentValue - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 48
Degraded. The Insight Agent has detected that an autoloader unit is in a degraded condition. • Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqTapeLibrarySerialNumber Supporting SNMP Trap Description: "Tape library [cpqTapeLibrarySerialNumber] is in a degraded condition." NT Event ID - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 49
Change. The Insight Agent has detected a change in the status of a CD Library device. The current CD Library status is indicated in the cpqScsiCdLibraryStatus variable. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqCdLibraryCntlrIndex • cpqCdLibraryBusIndex • cpqCdLibraryScsiIdIndex - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 50
. User Action: Check the partner controller for problems. If this was the result of a user initiated switchover, no action is required. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrSlot • cpqDaCntlrPartnerSlot Supporting SNMP Trap Description: "Controller in slot [cpqDaCntlrSlot - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 51
tapes has been lost. Check the tape library and all Fibre connections for problems. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeCntlrWWN • cpqFcTapeCntlrStatus Supporting SNMP Trap Description: "Status is now [cpqFcTapeCntlrStatus] for tape controller [cpqFcTapeCntlrWWN]." NT - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 52
, check the tape and all fibre channel connections. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeCntlrWWN • cpqFcTapeDriveScsiBus • cpqFcTapeDriveScsiTarget • cpqFcTapeDriveScsiLun • cpqFcTapeDriveStatus Supporting SNMP Trap Description: "Status is now [cpqFcTapeDriveStatus] for - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 53
indicates the new active controller index. User Action: Check the partner controller for problems. If this was the result of a user initiated switchover, no action is required. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime Storage agents 53 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 54
library. User Action: If the tape library is failed, check the tape library front panel. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaTapeLibraryCntlrIndex • cpqDaTapeLibraryScsiBus • cpqDaTapeLibraryScsiTarget • cpqDaTapeLibraryScsiLun • cpqDaTapeLibraryModel • cpqDaTapeLibraryFWRev - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 55
inserted and run. This causes the tape drive heads to be cleaned. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaTapeDrvCntlrIndex • cpqDaTapeDrvBusIndex • cpqDaTapeDrvScsiIdIndex • cpqDaTapeDrvLunIndex Supporting SNMP Trap Description: "Cleaning is needed for the tape drive." Storage - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 56
used and therefore needs to be replaced with a new cleaning tape. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaTapeDrvCntlrIndex • cpqDaTapeDrvBusIndex • cpqDaTapeDrvScsiIdIndex • cpqDaTapeDrvLunIndex Supporting SNMP Trap Description: "Cleaning tape needs replacing." NT Event ID - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 57
If the physical drive status is smartError(3) or failed(4), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqIdeAtaDiskControllerIndex • cpqIdeAtaDiskIndex • cpqIdeAtaDiskModel • cpqIdeAtaDiskFwRev • cpqIdeAtaDiskSerialNumber • cpqIdeAtaDiskStatus • cpqIdeAtaDiskChannel - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 58
status. User Action: If the fan status is degraded or failed, replace any failed fans. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqSsBackplaneIndex • cpqSsBackplaneVendor • cpqSsBackplaneModel • cpqSsBackplaneSerialNumber • cpqSsBackplaneFanStatus - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 59
of a tape library. The current tape library status is indicated in the cpqTapeLibraryState variable. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqTapeLibraryCntlrIndex • cpqTapeLibraryBusIndex • cpqTapeLibraryScsiIdIndex • cpqTapeLibraryLunIndex • cpqTapeLibraryName Storage agents 59 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 60
cpqTapeLibraryFwRev • cpqTapeLibrarySerialNumber • cpqTapeLibraryState Supporting SNMP Trap Description: "Status in the cpqTapePhyDrvStatus variable. Supporting SNMP Trap Data: • • cpqTapePhyDrvStatus Supporting SNMP Trap check the tape and all connections. Supporting SNMP Trap Data: • sysName • - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 61
tape inserted and run. This causes the tape drive heads to be cleaned. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeDriveCntlrIndex • cpqFcTapeDriveScsiBus • cpqFcTapeDriveScsiTarget • cpqFcTapeDriveScsiLun • cpqFcTapeDriveModel • cpqFcTapeDriveFWRev • cpqFcTapeDriveSerialNumber - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 62
that all cables are connected properly. If the RSO status is secondaryRunningAuto(8) or secondaryRunningUser(9), examine the primary server for failed components. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqSsChassisRsoStatus • cpqSsChassisIndex - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 63
door status. User Action: If the tape library door is open, close the tape library door. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeLibraryCntlrIndex • cpqFcTapeLibraryScsiBus • cpqFcTapeLibraryScsiTarget • cpqFcTapeLibraryScsiLun • cpqFcTapeLibraryModel • cpqFcTapeLibraryFWRev - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 64
is cableProblem(4), check the cable connections between the controller and the storage system. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaCntlrIndex • cpqDaCntlrBoardStatus • cpqDaCntlrModel • cpqDaCntlrSerialNumber • cpqDaCntlrFWRev • cpqDaAccelTotalMemory - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 65
. User Action: If the physical drive status is failed(3) or predictive Failure(4), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaPhyDrvCntlrIndex • cpqDaPhyDrvIndex • cpqDaPhyDrvBusNumber • cpqDaPhyDrvBay • cpqDaPhyDrvModel • cpqDaPhyDrvFWRev - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 66
Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaPhyDrvCntlrIndex • cpqDaPhyDrvIndex • cpqDaPhyDrvBusNumber • cpqDaPhyDrvBay • cpqDaPhyDrvModel • cpqDaPhyDrvFWRev • cpqDaPhyDrvSerialNum Supporting SNMP Trap Description: "Factory threshold passed for a physical drive." NT Event ID - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 67
If data was being stored in the accelerator cache memory when the server lost power, that data has been lost. User Action: Verify that no data has been lost. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaCntlrModel • cpqDaAccelCntlrIndex • cpqDaAccelSerialNumber - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 68
the tape library. User Action: If the tape library door is open, close the tape library door. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaTapeLibraryCntlrIndex • cpqDaTapeLibraryScsiBus • cpqDaTapeLibraryScsiTarget • cpqDaTapeLibraryScsiLun Storage agents 68 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 69
drive. User Action: If the tape is failed, check the tape and all SCSI connections. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaTapeDrvCntlrIndex • cpqDaTapeDrvBusIndex • cpqDaTapeDrvScsiIdIndex • cpqDaTapeDrvLunIndex • cpqDaTapeDrvName • cpqDaTapeDrvFwRev - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 70
that has been fully used and therefore needs to be replaced with a new cleaning tape. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaTapeDrvCntlrIndex • cpqDaTapeDrvBusIndex • cpqDaTapeDrvScsiIdIndex • cpqDaTapeDrvLunIndex • cpqDaTapeDrvName • cpqDaTapeDrvFwRev - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 71
SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxCntlrHwLocation • cpqSsBoxCntlrIndex • cpqSsBoxBusIndex • cpqSsBoxVendor • cpqSsBoxModel • cpqSsBoxSerialNumber • cpqSsBoxTempStatus Supporting SNMP Trap Description: "Storage System temperature status changed to [cpqSsBoxTempStatus]." NT Event ID - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 72
: If the power supply status is degraded, restore power or replace the failed power supply. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxCntlrHwLocation • cpqSsBoxCntlrIndex • cpqSsBoxBusIndex • cpqSsBoxVendor • cpqSsBoxModel • cpqSsBoxSerialNumber • cpqSsBoxFltTolPwrSupplyStatus - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 73
Action: If the physical drive status is failed (3) or predictiveFailure (4), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaPhyDrvCntlrIndex • cpqDaPhyDrvIndex • cpqDaPhyDrvLocationString • cpqDaPhyDrvType • cpqDaPhyDrvModel • cpqDaPhyDrvFWRev - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 74
User Action: If the fan status is degraded or failed, replace any failed fans. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxCntlrHwLocation • cpqSsBoxCntlrIndex • cpqSsBoxBusIndex • cpqSsBoxVendor • cpqSsBoxModel • cpqSsBoxSerialNumber • cpqSsBoxFanStatus • cpqSsBoxLocationString - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 75
: If the power supply status is degraded, restore power or replace the failed power supply. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxCntlrHwLocation • cpqSsBoxCntlrIndex • cpqSsBoxBusIndex • cpqSsBoxVendor • cpqSsBoxModel • cpqSsBoxSerialNumber • cpqSsBoxFltTolPwrSupplyStatus - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 76
• cpqSasPhyDrvFWRev • cpqSasPhyDrvSerialNumber • cpqSasPhyDrvSasAddress Supporting SNMP Trap Description: "Status is or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 1282 (Hex)0x84350502 (Service Event) Log Severity: Warning (2) Log Message - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 77
by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 1294 (Hex)0x8435050e (Service Event) Log Severity: Warning (2) Log Message: Unsupported storage system. The ProLiant storage system %1 is unsupported by this version of the - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 78
Reinstalling the Storage Agents may correct this problem. Event identifier: cpqstmsg.dll - 1803 (Hex)0xc435070b (Service Event) Log Severity: Error (3) Log Message a failure in the Remote Access Service or by a missing or invalid configuration. Use the HP Insight Management Agents control panel to - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 79
(2) Log Message: The IDE Agent could not create an event. The data contains the error code. Event identifier: cpqstmsg.dll - 3591 (Hex)0x84350e07 (Service Event) Log Severity: Warning (2) Log Message: The IDE Agent could not open an event. The data contains the error code. Event identifier: cpqstmsg - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 80
subkey: "%1". This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 4099 (Hex)0x84351003 (Service Event) Log Severity: Warning (2) Log Message: Could not read the registry subkey: "%1". This error can - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 81
subkey: "%1". This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 4611 (Hex)0x84351203 (Service Event) Log Severity: Warning (2) Log Message: Could not read the registry subkey: "%1". This error can - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 82
The insertion string is: %1. The data contains the error code. Event identifier: cpqsvmsg.dll - 257 (Hex)0x84350101 (Service Event) Log Severity: Warning (2) Log Message: The Server Agents service could not allocate memory. The data contains the error code. Event identifier: cpqsvmsg.dll - 258 (Hex - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 83
not unload the module "%1". The data contains the error code. Event identifier: cpqsvmsg.dll - 272 (Hex)0x84350110 (Service Event) Log Severity: Warning (2) Log Message: The Server Agents service could not create the registry key "%1". The data contains the error code. Event identifier: cpqsvmsg.dll - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 84
code. Event identifier: cpqsvmsg.dll - 400 (Hex)0x44350190 (Service Event) Log Severity: Information (1) Log Message: The Server Agents service version %1 has started. Event identifier: cpqsvmsg.dll - 401 (Hex)0x44350191 (Service Event) Log Severity: Information (1) Log Message: %1 Event identifier - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 85
has detected a memory fault. The Online Spare Memory has been activated. User Action: Schedule server down time to replace the faulty memory. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "The Advanced Memory Protection subsystem has engaged the online spare - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 86
fault. The XOR recovery engine has been activated. Schedule server down time to replace the memory. SNMP Trap: cpqHeResilientMemXorMemoryEngaged User Action: Replace the faulty memory. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "The Advanced Memory - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 87
have returned to a redundant state for the specified chassis. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeFltTolFanChassis Supporting SNMP Trap Description: "The Fans are now redundant on Chassis from the system. Value 0 for CPU means memory is not processor-based. Server agents 87 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 88
sysName • cpqHoTrapFlags • cpqHeResMem2BoardSlotNum • cpqHeResMem2BoardCpuNum • cpqHeResMem2BoardRiserNum Supporting SNMP Trap Description: "Memory Board or Cartridge Inserted or Riser. SNMP Trap Data: • sysName, • cpqHoTrapFlags • cpqHeResMem2BoardSlotNum • cpqHeResMem2BoardCpuNum Server agents 88 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 89
has been activated. For instruction on replacing the faulty memory, see the server documentation. SNMP Trap: cpqHeResilientMemLockStepMemoryEngaged User Action: Replace the faulty memory. Supporting SNMP Trap Data: • sysName, • cpqHoTrapFlags Supporting SNMP Trap Description: "The Advanced Memory - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 90
- 6019 in CPQHLTH.MIB Symptom: The temperature status has been set to OK. The server's temperature has returned to the normal operating range. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "Temperature has returned to normal range." NT Event ID: 1085 (Hex - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 91
. If the system fan is part of a redundancy group, the system will not be shut down. If the system fan is not part of a redundancy group, the normally. The server is shut down. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "CPU fan has failed. Server will be - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 92
has previously been shut down due to a thermal anomaly on the server and has just become operational again. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "Server is operational again after thermal shutdown." NT Event ID: 1092 (Hex)0x84350444 (cpqsvmsg.dll - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 93
in CPQHLTH.MIB Symptom: The fault tolerant power supply sub-system condition has been set to degraded. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "The server power supply status has become degraded." NT Event ID: 1108 (Hex)0x84350454 (cpqsvmsg.dll) Log - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 94
an error in the Remote Insight/ Integrated Lights-Out interface. The firmware is not responding. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "Server [sysName], Remote Insight/Integrated Lights-Out interface error." NT Event ID: 1112 (Hex)0x84350458 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 95
that the mouse cable is disconnected. SNMP Trap: cpqSm2MouseCableDisconnected - 9009 in CPQSM2.MIB Symptom: Mouse Cable Disconnected. The Remote Insight mouse cable has been disconnected. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Server agents 95 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 96
power cable has been disconnected. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "Remote Insight were detected. One or more Power-On-Self-Test errors were detected during server startup. SNMP Trap: cpqHe3PostError - 6027 in CPQHLTH.MIB Symptom: One or - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 97
SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "Errors occurred during server restart." NT Event ID: 1124 (Hex)0x84350464 (cpqsvmsg.dll) Log Severity: Warning (2) Log Message: The Fault Tolerant Power Supply Sub-system is in a degraded state. - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 98
have lost redundancy for the specified chassis. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeFltTolPowerSupplyChassis Supporting SNMP Trap Description: "The Power Supplies been removed from the system. SNMP Trap: cpqHe3FltTolPowerSupplyRemoved - 6034 in CPQHLTH.MIB Server agents 98 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 99
degraded for the specified chassis and fan. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeFltTolFanChassis • cpqHeFltTolFanIndex Supporting SNMP Trap Description: "The Fan Degraded on .MIB Symptom: The Fault Tolerant Fans have lost redundancy for the specified chassis. Server agents 99 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 100
.MIB Symptom: The temperature status has been set to failed in the specified chassis and location. The system is shut down due to this condition. Supporting SNMP Trap Data: • sysName Server agents 100 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 101
has been set to OK in the specified chassis and location. The server's temperature has returned to the normal operating range. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeTemperatureChassis • cpqHeTemperatureLocale Supporting SNMP Trap Description: "Temperature Normal on Chassis - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 102
socket. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHePwrConvChassis • cpqHePwrConvSlot • cpqHePwrConvSocket Supporting SNMP Trap redundancy for the specified chassis. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHePwrConvChassis Supporting SNMP Trap Description: "The - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 103
Action: Be sure the board and all cables are installed correctly, and that the board type and revision are the same as the replaced board. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSiHotPlugSlotChassis Server agents 103 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 104
agent or utility has changed the name of the rack. Each of the server blades in each of the enclosure within the rack is updated to reflect the : None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackSerialNum • cpqRackTrapSequenceNum Supporting SNMP Trap - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 105
Supporting SNMP Trap Description: "The enclosure name has changed to from the rack. User Action: None. Supporting SNMP Trap Data: • sysName • • cpqRackCommonEnclosureTrapSequenceNum Supporting SNMP Trap into the rack. User Action: None. Supporting SNMP Trap Data: • sysName • - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 106
that air flow in the rack has not been blocked. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • and that air flow in the rack has not been blocked. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackCommonEnclosureName Server agents 106 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 107
temperature sensor has returned to normal. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName in the enclosure overheating. User Action: Replace the fan as soon as possible. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName Server agents 107 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 108
overheating. User Action: Replace the fan as soon as possible. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid OK. This trap indicates that an enclosure fan has returned to normal operation. User Action: None. Supporting SNMP Trap Data: • sysName Server agents 108 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 109
The enclosure fan has been removed. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • - 22012 in CPQRACK.MIB Symptom: The enclosure fan has been inserted. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Server agents 109 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 110
has failed. User Action: Replace the power supply as soon as possible. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackPowerSupplyEnclosureName that a power supply has degraded. User Action: Replace the power supply as soon as possible. Server agents 110 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 111
a power supply has returned to normal operation. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackPowerSupplyEnclosureName Warning (2) Event Title: Rack Power Supply Removed Log Message: The power supply has been removed. Server agents 111 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 112
• cpqRackCommonEnclosureTrapSequenceNum Supporting SNMP Trap Description: "The power supply [cpqRackPowerSupplyPosition] in enclosure [cpqRackPowerSupplyEnclosureName] in rack [cpqRackName] has been inserted." NT Event ID: 1160 (Hex)0x84350488 (cpqsvmsg.dll) Log Severity: Warning (2) Server agents - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 113
Supporting SNMP Trap Description: "The rack power supply detected an input line voltage problem in power supply [cpqRackPowerSupplyPosition], enclosure [cpqRackPowerSupplyEnclosureName], rack [cpqRackName]." NT Event ID: 1162 (Hex)0x8435048a (cpqsvmsg.dll) Server - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 114
. SNMP Trap: cpqRackPowerShedAutoShutdown - 22021 in CPQRACK.MIB Symptom: Server shutdown due to power shedding. The server blade was shut down due to a lack of power. User Action: Check power connections or add power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 115
on. There is not enough power to power on the server blade. User Action: Check power connections or add power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackServerBladeEnclosureName • cpqRackServerBladePosition • cpqRackServerBladeSparePartNumber - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 116
on. There is not enough power to power on the server blade. The server enclosure micro-controller was not found. User Action: Check server enclosure connections or add power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackServerBladeEnclosureName - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 117
Title: Server Power On Via Manual Override Log Message: Server power on via manual override. SNMP Trap: cpqRackServerPowerOnManualOverride - 22026 in CPQRACK.MIB Symptom: Server power on via manual override. The server blade was powered on by a manual override. User Action: None. Supporting SNMP - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 118
from the enclosure. SNMP Trap: cpqRackServerBladeRemoved - 22028 in CPQRACK.MIB Symptom: Server blade removed. The server blade has been removed from the enclosure. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackServerBladeEnclosureName - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 119
: Power subsystem DC power problem. There is a power subsystem DC power problem for this power enclosure. User Action: Check the power enclosure and power supplies. Replace any failed or degraded power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName Server agents 119 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 120
• cpqRackCommonEnclosureTrapSequenceNum Supporting SNMP Trap Description: "Power subsystem DC power problem in enclosure enclosure and power supplies. Replace any failed or degraded power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid Server agents 120 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 121
• cpqRackCommonEnclosureSerialNum • cpqRackCommonEnclosureTrapSequenceNum Supporting SNMP Trap Description: "Unknown load balancing wire. Supporting SNMP Trap Data: • cpqRackCommonEnclosureTrapSequenceNum Supporting SNMP Trap Remove the extra power enclosure. Supporting SNMP Trap Data: • sysName - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 122
because of a firmware update or some other event. User action: None Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "The Management processor is in the process of being management processor has successfully reset and is now available again. Server agents 122 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 123
SNMP Trap: 1008 in CPQSTDEQ.MIB Symptom: The USB key is attached to the server. User Action: None required. Supporting SNMP Trap Data: • sysName, • cpqHoTrapFlags • cpqSeUSBDeviceType • cpqSeUSBDeviceName Supporting SNMP Trap Description: This trap is sent when a USB storage device has been attached - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 124
can be caused by a corrupt or missing file. Reinstalling the Server Agents, the software support drivers, or running the Emergency Repair procedure may correct this error. Event identifier: cpqsvmsg.dll - 1544 (Hex)0x84350608 (Service Event) Log Severity: Warning (2) Log Message: Unable to read from - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 125
Log Severity: Warning (2) Log Message: The Server Agent service is not running. The Server SNMP Agent has determined that the Server Agent service is not running. Stop the SNMP service and restart the Server Agents service. If the error persists, reinstalling the Server Agents may correct this error - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 126
a low memory condition. Rebooting the server may correct this error. Event identifier: cpqsvmsg.dll - 3333 (Hex)0x84350d05 (Service Event) Log Severity: Warning (2) Log SYS) to be installed. Install the driver from the latest Software Support for Windows. If you do not have a Remote Insight Board in - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 127
Hex)0x84351604 (Service Event) Log 0x84351605 (Service Event) Hex)0x84351606 (Service Event) (Hex)0x84351607 (Service Event) Log Severity (Hex)0x84351608 (Service Event) Log Hex)0x84351609 (Service Event) Log Hex)0x8435160a (Service Event) Log (Hex)0x8435160b (Service Event) Log (Service Event) Log - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 128
identifier: cpqsvmsg.dll - 5682 (Hex)0x84351632 (Service Event) Log Severity: Warning (2) Log Message: : cpqsvmsg.dll - 5683 (Hex)0x84351633 (Service Event) Log Severity: Warning (2) Log Message identifier: cpqsvmsg.dll - 5684 (Hex)0x84351634 (Service Event) Log Severity: Warning (2) Log Message: - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 129
the registry. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqnimsg.dll - 262 (Hex)0x84350106 (Service Event) Log Severity: Warning (2) Log Message: Could not create the registry key: "%1". This error can be - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 130
low memory condition. Rebooting the server may correct this error. Event identifier: cpqnimsg.dll - 271 (Hex)0x8435010f (Service Event) Log Severity: Warning (2) may correct the problem. The data contain the error code. Event identifier: cpqnimsg.dll - 272 (Hex)0x84350110 (Service Event) Log Severity - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 131
: Warning (2) Log Message: The NIC Management Agent cannot generate Traps due to a communication problem with the NIC SNMP extension agent. Event identifier: cpqnimsg.dll - 275 (Hex)0x44350113 (Service Event) Log Severity: Information (1) Log Message: Communication with the NIC SNMP extension agent - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 132
log an event to the IML failed. The IML log may be full. Clearing the IML log may correct this problem. Event identifier: cpqnimsg.dll - 298 (Hex)0xc435012a (Service Event) Log Severity: Error (3) Log Message: A fatal error occurred during Virus Throttle WMI event processing. Virus Throttle related - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 133
not running. Starting WMI service or NIC agent might solve this problem. Event identifier: cpqnimsg.dll - 299 (Hex)0x8435012b (Service Event) Log Severity: with key %1. Check to make sure management service is up and running. This may cause data received from Compaq SNMP agent to be old or invalid. - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 134
the Insight Agents may correct this problem. Event identifier: cpqnimsg.dll - 1033 (Hex)0x44350409 (Service Event) Log Severity: Information (1) 0x8435040c (Service Event) Log Severity: Warning (2) Log Message: The NIC SNMP Management Agent was unable to forward an SNMP trap to the Compaq Remote - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 135
a trap. This can be caused by a failure in the Remote Access Service or by a missing or invalid configuration. Use the Insight Agent control panel to Hub or Switch. If no cable problems are found, the adapter, Hub, or Switch may need replacement. Supporting SNMP Trap Data: • sysName NIC agents 135 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 136
cable that was unplugged. User Action: None required. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • the adapter and the Hub or Switch. If no cable problems are found, the adapter, Hub, or Switch may need replacement. Supporting SNMP Trap Data: • sysName NIC agents 136 - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 137
a faulty cable or connecting a cable that was disconnected. User Action: None required. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqNicIfPhysAdapterSlot • cpqNicIfPhysAdapterPort • cpqSiServerSystemId • cpqNicIfPhysAdapterStatus • cpqSePciSlotBoardName • cpqNicIfPhysAdapterPartNumber - Compaq ProLiant 1000 | Microsoft Windows Event ID and SNMP Traps Reference Guide - Page 138
to the adapter and the Hub or Switch. If no cable problems are found, the adapter, Hub, or Switch may need replacement. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqNicIfPhysAdapterSlot • cpqNicIfPhysAdapterPort • cpqSiServerSystemId • cpqNicIfPhysAdapterStatus • cpqSePciSlotBoardName
Microsoft Windows Event ID and SNMP Traps
Reference Guide
For use with SmartStart version 8.25
Part number: 347870-009
Ninth edition: June 2009