Compaq ProLiant CL380 Implementing Novell NetWare 6.5 on ProLiant servers inte
Compaq ProLiant CL380 Manual
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq ProLiant CL380 manual content summary:
- Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 1
on HP ProLiant servers integration note, 3rd edition Abstract...2 Acronyms in text ...2 Introduction to Novell NetWare 6.5 ...3 Supported configurations ...3 Recommended system configuration 3 Server platforms...4 Supported software ...5 Supported storage options ...5 Supported network interface - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 2
Domain Name Server/Service Disk Operating System Graphical User Interface Integrated Lights-Out Internet Protocol Internetwork Packet Exchange Network Interface Controller Novell Storage Services Option ROM Configuration for Arrays Operating System Power-On Self Test ProLiant Support Pack ROM - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 3
. Prior to installation, ensure that the latest server ROM has been installed on the server. Additionally, apply firmware updates to all devices in the server such as controllers and disk drives. ROM and driver updates for all HP products can be found at www.hp.com/cgi-bin/hpsupport/index.pl. 3 - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 4
of HP ProLiant server models. The Novell NetWare Support on HP ProLiant Servers Matrix (Figure 1) identifies, by model, the ProLiant servers that have been certified for NetWare 6.5 and include support software from HP. Figure 1. Snapshot of the Novell NetWare Support on HP ProLiant Servers Matrix - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 5
Go to the HP website, www.hp.com. 2. Select Support and Drivers. 3. Enter the ProLiant server model (for example, ProLiant DL380 G5). 4. Select the appropriate server model from the Product Search List. 5. Select Novell NetWare 6.5 as the operating system. 6. Select Software - Support Pack for the - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 6
6.5 Operating System CD NetWare 6.5 Operating System CD Supported network interface controllers Table 4 lists supported ProLiant network interface controllers (NICs) and drivers supported by NetWare 6.5. Table 4. Supported ProLiant NICs NIC HP NC150T PCI 4-port Gigabit Combo Switch Adapter - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 7
Server Adapter HP NC7781 Gigabit Server Adapter HP NC7780 Gigabit Server Adapter HP NC7771 Gigabit Server Adapter HP NC7770 Gigabit Server Adapter HP Embedded NC7761 Gigabit Server Adapter HP NC7760 Gigabit Server Adapter HP NC6770 Gigabit Server Adapter HP NC1020 Gigabit Server Adapter Driver - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 8
PCI Express Dual Port Multifunction Gigabit Server Adapter HP BladeSystem Dual NC370i Multifunction Gigabit Server Adapter HP BladeSystem Dual NC370i Multifunction Gigabit Server Adapter HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter Driver N100.LAN N100.LAN N100.LAN N100 - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 9
NC360m Dual Port Gigabit Ethernet BL-c Adapter HP NC364T PCI Express Quad Port Gigabit Server Adapter HP NC360T PCI Express Dual Port Gigabit Server Adapter HP NC110T PCI Express Single Port Gigabit Server Adapter HP NC150T PCI 4-port Gigabit Combo Switch Adapter Driver BX2.LAN BX2.LAN BX2.LAN BX2 - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 10
in the product user guides available at the following locations: • For iLO and iLO2: http://h18013.www1.hp.com/products/servers/management/ilo/documentation.html • For RILOE II: http://h18013.www1.hp.com/products/servers/management/riloe2/documentation.html SmartStart support SmartStart 8.00 and - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 11
for installing NetWare 6.5 as a new installation only. Performing a new installation 1. Select a supported platform from the server platforms listed in the Novell NetWare Support on HP ProLiant Servers Matrix: http://h71028.www7.hp.com/enterprise/cache/470230-0-0-0121.html. 2. Inspect the system to - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 12
servers with PCI Hot Plug support) • Storage Adapters - varies by server model • Network Adapters - varies by server model g. Create the SYS: volume. The default is 4 GB, which is a satisfactory size for most installation types. h. Once the SYS: volume has been created, the Novell Storage Services - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 13
network. o. Select the proper time zone for the server Modular Authentication Service (NMAS) Login Method. Netware Directory Services (NDS) supported from the following NetWare versions: • NetWare 6 with Support Pack 3 (or later) • NetWare 5.1 with Support Pack 6 (or later) Upgrades to servers - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 14
Preparing the Network. This selection performs the following operations: • Verifies that the existing version of NDS (eDirectory) is at minimum levels, and upgrades the tree, if necessary. • Extends the schema to support NetWare 6.5 objects. • Creates GUIDs for NetWare 4.11 and 4.12 servers in the - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 15
option of No, because HP does not provide support for unsupported driver installations. 15.Select either a Default or Manual upgrade by clicking the radio button next to the desired choice. • The Default upgrade automatically detects drivers and then upgrades the server to NetWare 6.5 with default - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 16
with the next step. 21.The device drivers are detected and you are presented with CPQACPI.PSM and CPQMPK.PSM are not supported on NetWare 6.5. Although both PSMs will to eDirectory (NDS) as a user with Admin rights. After successfully this is the first NetWare 6.5 server in the tree, insert a license - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 17
the NMAS login methods. The NMAS client software is included on the Novell Clients Software CD (July 2003). 28.At this server. When the server successfully reboots, NetWare 6.5 is functional and ready for user login. Post upgrade tasks Updating NSS Volumes If you upgraded from a NetWare 5.1 server - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 18
workstations at this time. You can also choose to run workstations without additional software using Novell Native File Access Protocols. For more information, see the Novell Client , download and install the latest updates available at Novell Support and Downloads: http://support.novell.com/. 18 - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 19
2 HP ProLiant ML350 G5 Server Series - HPQCISS.HAM in Novell NetWare 6.5 Service Pack 6 (SP6) Causes Server to Freeze Description The server freezes, and after the server is restarted, it reports HPQCISS.HAM invalid Slot. This prevents the server from restarting. Review the HP Support Customer - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 20
Continuous Beeps and CDM Driver Error Messages May Occur After Rebooting HP ProLiant Server Running NetWare 6.5 SP5 (or Later) With Failed Logical Drive(s) Configured on HP Smart Array SAS/SATA Controller Description After rebooting a ProLiant server configured with one of the HP Smart Array SAS - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 21
To locate the description, type "2974251" in the "Technical Information Search" screen, click the "Search by TID ID" and "Documentation" check boxes, then click the "Search" button. http://support.novell.com Any ProLiant ML570 G3 server that is installing NetWare 6.5 SP5. Solution To successfully - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 22
HP ProLiant DL385 G2 server running Netware 6.5 SP5, which includes ACPIDRV.PSM Version 1.05g (October 3, 2005). ACPIDRV.PSM and the associated modules from SP5 are listed below: Table 6a. Affected ACPIDRV.PSM Driver at the following Novell URL: http://support.novell.com/cgi-bin/search/searchtid.cgi - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 23
resource. This issue, which is not specific to HP, has been documented by Novell in TID 10095608: Clients Lose Connection with Cluster Resource After Migration1. Any ProLiant server running Novell Cluster Services and the HP Gigabit Ethernet NIC Teaming Driver (QASP.LAN). Solution To recover from - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 24
Bus Adapter with RAID configured in an HP ProLiant ML570 G3 or ProLiant ML570 G4 server running NetWare 6.5. Version 7.60 (and earlier) of the HP Insight Management Storage Agents does not provide this information to the SMH (or similar software applications) because version 7.60 (and earlier) of - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 25
Wait appears while the network adapter driver is loading, followed by the ABEND. This occurs because the interrupt for Port 2 of the Embedded Dual NC373i Multifunction Gigabit Network Adapter is shared with Slot 3 in the ACPI) table. Any HP ProLiant DL380 G5 server installing or running NetWare - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 26
Invalid or corrupted memory returned to PlatFree This occurs because the USB driver in NetWare 6.5 SP4 (or earlier) does not support iLO 2. Any HP ProLiant ML310 G3 server that is either booting or installing NetWare 6.5 with SP4 (or earlier) and Integrated Lights-Out 2 (iLO 2) firmware version 1.00 - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 27
which are available at the following URLs: • iLO 2 Firmware Version 1.01 (or later) To download, go to www.hp.com/support and select the country and language. • Select the Download drivers and software (and firmware) radio button. • Type the name of the server in the window and press ENTER. • Select - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 28
error message: Error 0X00001105 Starting Processor 1 . Processor 1 activation failed. Any HP ProLiant DL145, ProLiant DL145 G2, or ProLiant DL385 server that is running NetWare 6.5 SP3 (or later). Solution To avoid the server unresponsiveness, perform one of the following: • On an AMD Opteron - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 29
.HAM NOTE: This is not an HP-specific issue and is documented by Novell in TID #10099897 on the Novell website. Any HP ProLiant server running NetWare 6.5. Workaround To avoid the ABEND, do not deactivate the SYS volume OR unload the driver that supports the SYS volume. To prevent the ABEND - Compaq ProLiant CL380 | Implementing Novell NetWare 6.5 on ProLiant servers inte - Page 30
without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions
Implementing Novell NetWare 6.5 on HP
ProLiant servers
integration note, 3
rd
edition
Abstract
..............................................................................................................................................
2
Acronyms in text
..................................................................................................................................
2
Introduction to Novell NetWare 6.5
......................................................................................................
3
Supported configurations
......................................................................................................................
3
Recommended system configuration
...................................................................................................
3
Server platforms
...............................................................................................................................
4
Supported software
..........................................................................................................................
5
Supported storage options
................................................................................................................
5
Supported network interface controllers
..............................................................................................
6
Server management using iLO, iLO2, or RILOE II
...................................................................................
10
SmartStart support
.............................................................................................................................
10
Installation procedures
........................................................................................................................
11
Performing a new installation
...........................................................................................................
11
Upgrade procedures
..........................................................................................................................
13
Reviewing the requirements
.............................................................................................................
13
Understanding the upgrade options
..................................................................................................
14
Preparing the network using NetWare Deployment Manager
..............................................................
14
Post upgrade tasks
.............................................................................................................................
17
Updating NSS Volumes
..................................................................................................................
17
Installing or Updating Novell Client Software
....................................................................................
18
Installing Product Updates
...............................................................................................................
18
Troubleshooting
.................................................................................................................................
19
For more information
..........................................................................................................................
30
Call to action
....................................................................................................................................
30