Compaq T1010 T1000/T1010 Series Windows-based Terminal Administrator's Guide
Compaq T1010 - Windows-based Terminals - 48 MB RAM Manual
UPC - 720591643454
View all Compaq T1010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq T1010 manual content summary:
- Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 1
T1000/T1010 Series Windows®-based Terminal Administrators Guide Software Version 3.5 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 2
T1000/T1010 Series Windows®-based Terminal Administrators Guide Software Version 3.5 February 2001 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 3
NT, and Windows Terminal Server are registered trademarks of Microsoft Corporation. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies. The Energy Star emblem does not represent endorsement of any product or service. Specifications subject to - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 4
EULA for Microsoft® Windows® CE Operating System for Windows-based Terminal Devices IMPORTANT-READ CAREFULLY This End User License Agreement (EULA SOFTWARE, and you should promptly contact MANUFACTURER for instructions on return of the unused product(s) for a refund. Software License The SOFTWARE - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 5
a Client Access License for Windows NT Server, Terminal Server Edition and (2) an end user license for Windows NT Workstation or an end user license agreement for Windows NT Workstation for Windows-based Terminal Devices (please refer to the end user license agreement for Windows NT Server, Terminal - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 6
), and the recipient agrees to the terms of this EULA. If the SOFTWARE is an upgrade, any transfer must include all prior versions of the SOFTWARE. • Termination Without prejudice to any other rights, MANUFACTURER or MS may terminate this EULA if you fail to comply with the terms and conditions of - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 7
Restrictions You agree that you will not export or re-export the SOFTWARE to any country, person, or entity subject to U.S. export restrictions. You specifically agree not to export or re-export the SOFTWARE: (i) to any country to which the U.S. has embargoed or restricted the export of goods or - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 8
MANUFACTURER'S option, either (a) return of the price paid, or (b) repair or replacement of the SOFTWARE that does not meet the above Limited Warranty AS EXPRESSLY PROVIDED IN THE LIMITED WARRANTY SECTION ABOVE, THE SOFTWARE IS PROVIDED TO THE END USER "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 9
apply. Should you have any questions concerning this EULA, please contact the MANUFACTURER of your SYSTEM. U.S. GOVERNMENT RESTRICTED RIGHTS The SOFTWARE and documentation are provided with RESTRICTED RIGHTS. Use, duplication, or disclosure by the Government is subject to restrictions as set forth - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 10
the instructions, manual must be approved in writing by the manufacturer's Regulatory Engineering department. Changes or modifications made without written approval may void the user's authority to operate the equipment. Terminal Requirements Compliance FCC Compliance Models T1000 and T1010 terminals - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 11
product conforms to requirements of EN55022 for Class A equipment or EN55022 for Class B equipment (refer to "Terminal Requirements Compliance"). T10x0 Series Windows-based Terminals For use with External Power Supply DVE Model DSA-0301-05 or Potrans Model UP01811050A or certified equivalent model - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 12
xiii Cable Notice The use of shielded I/O cables is required when connecting this equipment to any and all optional peripheral or host devices. Failure to do so may cause interference and violate FCC and international regulations for electromagnetic interference. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 13
SOFTWARE (TOGETHER WITH ANY SUPPLIED DOCUMENTATION, HEREAFTER "SOFTWARE"), WHICH IS OWNED BY THE MANUFACTURER OR ITS LICENSORS. USING THIS SOFTWARE the manufacturer-produced Terminal. You may transfer ownership of the Terminal and equipment, including the right to use the Software to another party - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 14
SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO BETWEEN US RELATING TO THE SOFTWARE. Export Restrictions You agree You will not export or transmit the Software to any country to which export is - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 15
Patents iii About the Administrators Guide Guide Overview xxv Guide Conventions xxvi Text Format xxvi User Interface Menu Control xxvii Terminal Installation 1 Model T1000 Terminal Installation Locating the Terminal 3 Connecting the Terminal 3 Mounting the Terminal 7 Freestanding Desktop Mounting - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 16
xviii Using the Setup Wizard 17 4 Changing Terminal Properties Using the Terminal Properties Dialog Box 39 Resetting to Factory Defaults 40 Terminal Settings Change Dialog Box 41 5 Network Configuration Using the Network Properties Sheet 43 6 Web Browser Using the Web Properties Sheet 47 7 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 17
RDP Connections Using the WTS Connection Wizard 101 16 Terminal Emulation Connections Using the TE Client Connection Wizard 107 17 TCP/IP Telnet Configuration Using Sheet 130 Using the Logon Properties Sheet 131 Using the Window Properties Sheet 132 Using the Options Properties Sheet 134 Using - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 18
Properties Sheet 154 23 Add-On Add-on Dialog Box Uninstall Tab 155 Add-on Dialog Box System Tab 157 24 Aironet Wireless LAN Adapter Setup Using the Aironet Dialog Box 160 25 PC Card Adapters for Modems ISDN Settings 163 26 Touchscreens ELO Touchscreen 165 MicroTouch Touchscreen 167 Hardware - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 19
Parallel Flash Download Procedure 202 Manual Download 203 Cable Pinouts 204 Parallel Download Cable Pinouts 204 35 FTP Pull Firmware Upgrades Using the Upgrade Properties Sheet 207 FTP and Params.ini 210 The Upgrade Process 210 36 SNMP Firmware Upgrades Using the SNMP Network Administration Dialog - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 20
Accounts Using the Modify User Account Dialog Box 243 Deleting Terminal Accounts 248 42 Terminal Login Logging Into the Terminal 249 Autologin and Autoconnect 250 Autologin 250 AutoStart 250 Single Button Connect 251 43 Failover Getting Help 44 Windows-based Terminal Specifications 45 How to... 46 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 21
B NFuse Server Configuration Requirements Introduction 303 PNLite Access 303 Browser-Based Access 303 Glossary 305 xxiii - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 22
administrators and covers the Models T1000 and T1010 terminals. Guide Overview The administrators guide consists of the following chapters: • Terminal Installation • Advanced User Interface • Connection Configuration • External Devices • Firmware Upgrades • Client Security • Getting Help This guide - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 23
New term, book title, or emphasis. Bold Screen display, keycaps, and user input. Note This convention indicates a note. A note adds information. Caution data. + Keystroke sequences such as: Ctrl+Alt+Del | Instructions about invoking a menu such as: Network | SNMP Network | Location - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 24
Menu Control Table 2 describes the command buttons used for user interface menu control on a T1000/T1010 WBT. Table 2 User Interface Menu Control Command Button Function X Found in the upper right corner of a dialog box. Click on this command button to quit a dialog box or - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 25
Terminal Installation 1 Model T1000 Terminal Installation 2 Model T1010 Terminal Installation - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 26
T1000 terminal. Note A keyboard and AC power cord are supplied with U.S. models only. Locating the Terminal Position the terminal on a clean, horizontal surface that is free from vibration and out of direct sunlight. Refer to "Windows-based Terminal Specifications" for environmental specifications - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 27
4 Terminal Installation Figure 1-1 T1000 Terminal Back Panel Connectors - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 28
following table summarizes the back panel connectors' functions. Table 1-1 T1000 Terminal Back Panel Connectors Connector Description Network Connector LAN connector, 10 Mouse PS-2 mouse interface USB Keyboard and mouse. Power Power module cable interface Option Slot PCMCIA card slot - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 29
its socket. If any undue resistance is encountered, ensure that the connector is oriented correctly to the socket. 7. Plug the AC cord into the power supply, then into an AC outlet. 8. After the cables are connected, install the terminal in its planned location (see the next section "Mounting the - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 30
the Terminal Instructions for mounting your terminal are provided in the following paragraphs. Freestanding Desktop Mounting The terminal is stand to the terminal housing. The following figure shows the terminal mounted on the desktop mounting stand. Figure 1-2 T1000 Freestanding Desktop Mounting - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 31
figure for the location of the power button. Figure 1-3 T1000 Power Button The splash screen will appear, followed by: • The Setup Wizard, if it is the first time that you have turned on your terminal. • The Connection Manager dialog box, if the Setup Wizard has been completed. Adjustments to - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 32
and AC power cord are supplied with U.S. models only. Locating the Terminal Position the terminal on a clean, horizontal surface that is free from vibration and out of direct sunlight. Refer to "Windows-based Terminal Specifications" for environmental specifications. Connecting the Terminal Make all - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 33
10 Terminal Installation Figure 2-1 T1010 Terminal Back Panel Connectors - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 34
table summarizes the back panel connectors' functions. Table 2-1 T1010 Terminal Back Panel Connectors Connector Description Network Connector LAN connector, interface Mouse PS-2 mouse interface USB USB interface Power Power module cable interface Option Slot PCMCIA card slot Headphone - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 35
its socket. If any undue resistance is encountered, ensure that the connector is oriented correctly to the socket. 7. Plug the AC cord into the power supply, then into an AC outlet. 8. After the cables are connected, install the terminal in its planned location (see the next section "Mounting the - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 36
the Terminal Instructions for mounting your terminal are provided in the following paragraphs. Freestanding Desktop Mounting The terminal is stand to the terminal housing. The following figure shows the terminal mounted on the desktop mounting stand. Figure 2-2 T1010 Freestanding Desktop Mounting - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 37
figure for the location of the power button. Figure 2-3 T1010 Power Button The splash screen will appear, followed by: • The Setup Wizard, if it is the first time that you have turned on your terminal. • The Connection Manager dialog box, if the Setup Wizard has been completed. Adjustments to - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 38
Advanced User Interface 8 Initial Terminal Setup 9 Changing Terminal Properties 10 Network Configuration 11 Web Browser 12 Additional Terminal Applications 13 ICA Client Settings - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 39
Setup The Setup Wizard is used for initial setup of the terminal's properties. The wizard runs when: • You power-up your terminal for the first time. • An image has been downloaded to your terminal that is older than the image currently in use. • You use the Reset the Terminal to Factory-Default - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 40
18 Advanced User Interface Figure 3-1 Welcome/Countdown Dialog Box The Welcome/Countdown dialog box provides product information and a countdown. • Click on Next during the countdown before it reaches zero to continue with the wizard. Or • Let the count go to zero to auto-configure the terminal. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 41
User Interface 19 Figure 3-2 IP Address Dialog Box Note Contact the network administrator if a message appears in the box indicating that no network services were found. It may be that the network is not connected to the terminal or the network services are not configured. The default supplied - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 42
20 Advanced User Interface Figure 3-3 Specify an IP Address Dialog Box Enter the addressing information requested in the fields provided (by default the fields are blank). Click on Next to go to the Optional Information dialog box (Figure 3-4). - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 43
Advanced User Interface 21 Figure 3-4 Optional Information Dialog Box Check a box to enable name resolution: • Enable DNS - Enables Domain Name Services • Enable WINS - Enables Windows Internet Naming Services Enter the information in the text fields that are active. By default the check boxes - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 44
22 Advanced User Interface Figure 3-5 Desktop and Keyboard Settings Dialog Box - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 45
Advanced User Interface 23 The Supported in all terminals. • 800 x 600 @ 85Hz Supported in all terminals. • 1024 x 768 @ 60Hz Supported in all terminals. • 1024 x 768 @ 75Hz Supported in all terminals. • 1024 x 768 @ 85 Hz Supported in all terminals. • 1280 x 1024 @ 60 Hz Supported in the T1010 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 46
24 Advanced User Interface Table 3-1 Desktop and Keyboard Settings Dialog Box, Continued Function if you want the numeric keypad to be active when the terminal boots. The following keyboard mappings are supported by the firmware: Belgian Dutch Belgian French Brazilian (ABNT) Canadian Eng (Multi) - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 47
Advanced User Interface 25 After making a new selection or accepting the default, click on Next ro go to the Browser Setup dialog box. Figure 3-6 Browser Setup Dialog Box Select whether or not to set up a local browser, and click Next to the next step. If you selected Yes, the Browser URLs - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 48
26 Advanced User Interface Figure 3-7 Browser URLs Dialog Box Type the URLs for the Home and Search pages, or accept the defaults, and click Next to continue. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 49
Advanced User Interface 27 Figure 3-8 Preferences Dialog Box Select the desired preferences or accept the defaults, and click Next to continue. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 50
28 Advanced User Interface Figure 3-9 History and Favorites Dialog Box Uncheck the boxes or accept the defaults (checked) for the indicated selections, and click Next to continue. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 51
Advanced User Interface 29 Figure 3-10 Proxy Server Dialog Box If your terminal accesses the Internet through a proxy server, check the Use proxy server box and make the required entries in the now-enabled text and check boxes, and click Next to continue to the Local Printer Setup dialog box ( - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 52
a printer connected locally to your terminal, select Yes and the dialog boxes that follow will prompt you for printer information. Note This local printer setup applies only to RDP connections. See "Local Printers" for further information. If you select No (the default), you will skip the remaining - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 53
Advanced User Interface 31 Figure 3-12 Select Printer Port Dialog Box In the Select Printer Port dialog box, select the port to which the printer is connected and click on Next to go to the next step. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 54
32 Advanced User Interface Figure 3-13 Select Printer Model Dialog Box In the Select the Printer Model dialog box, select the printer model from the list and click on Next to go to the next step. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 55
Advanced User Interface 33 Figure 3-14 Printer Name Dialog Box In the Name Your Printer dialog box, enter a name by which to refer to your printer and click on Next to go to the next step. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 56
34 Advanced User Interface Figure 3-15 Default Printer Dialog Box In the Set Default Printer dialog box, select whether or not you want your Windows-based programs to use this printer as the default printer (Yes is the default selection). Click on Next to go to the next step. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 57
Advanced User Interface 35 Figure 3-16 Configure Another Printer Dialog Box If you have another printer connected to a different port on your terminal, select Yes in the Configure another printer dialog box. Click on Next to go to the next step. If you selected Yes, the printer setup process will - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 58
36 Advanced User Interface Figure 3-17 Finish Dialog Box The Finish dialog box is informational. Click on the Finish command button to apply your selections and quit the Setup Wizard. After the Setup Wizard closes, the Terminal Settings Change dialog box displays. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 59
Dialog Box When you click on Restart, the terminal will go through the boot process and restart in the normal operating mode. If you want to change any of the selections after you restart, press F2 to open the Terminal Properties dialog box (see "Changing Terminal Properties" for instructions). - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 60
terminal operation using the Terminal Properties dialog box. Figure 4-1 shows this dialog box. Using the Terminal Properties Dialog Box Invoke the Terminal to change terminal properties: • Network - discussed in "Network Configuration" • Upgrade - beginning with "Cable Firmware Upgrades". • Security - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 61
40 Advanced User Interface Figure 4-1 Terminal Properties Dialog Box Note The amount of available RAM may differ between terminal models. Resetting to Factory Defaults Proceed as follows: 1. Click on the General tab of the Terminal Properties dialog box. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 62
on Yes to start the reset process. The terminal will restart with the factory defaults in effect. The Setup Wizard displays when the terminal resets. Note If the above reset procedure fails, call technical support at Compaq (800-OKCOMPAQ) for instructions on using a hot-key reset procedure. Figure - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 63
42 Advanced User Interface Figure 4-3 Terminal Settings Change Dialog Box This dialog box contains the Restart command button. The terminal must be restarted in order for your new settings to take effect. Click on Restart to restart the terminal. The Connection Manager displays. See "Connections - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 64
5 Network Configuration The Network properties sheet lets you configure your network. See Figure 5-1 to view this properties sheet. Using the Network Properties Sheet To invoke this properties sheet: 1. Press F2 to invoke the Terminal Properties dialog box. 2. Click on the Network tab. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 65
44 Advanced User Interface Figure 5-1 Network Properties Sheet The following table discusses the functions of the Network properties sheet. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 66
Click on this radio button to enable DHCP addressing. An IP address will be automatically assigned to your terminal by the DHCP server. Specify an IP Address Use this group box to enter a specific IP address. IP Address Enter a static IP address in this field. Subnet Mask Enter the subnet mask - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 67
46 Advanced User Interface Table 5-1 Network Properties Sheet, Continued Function Description Use the controls in this group to set domain, primary, and secondary IP addresses for DNS. The default for the group is disabled (Enable DNS not checked). Enable WINS Use the controls in this group - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 68
System time should be set accurately for cookies to work properly for some Web pages. Use of a time server is preferred. See "SNTP Client" in External Devices for information about synchronizing system time to a time server. Using the Web Properties Sheet To invoke this properties sheet: 1. Press - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 69
48 Advanced User Interface Figure 6-1 Web Properties Sheet Table 6-1 discusses the functions of the Web properties sheet. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 70
dialog box (Figure 6-3). If your terminal accesses the Internet through a proxy server check the Use proxy server box and make the appropriate entries in the now-enabled text and check boxes. Note For instructions on using the browser, refer to the T1000/T1010 Windows-based Terminal Users Guide. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 71
50 Advanced User Interface Figure 6-2 Preferences Dialog Box Figure 6-3 Proxy Information Dialog Box - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 72
7-1. Using the Apps Properties Sheet Figure 7-1 shows this properties sheet. To invoke the Apps properties sheet: 1. Press F2 to invoke the Terminal Properties dialog box. 2. Click on the Apps tab in the Terminal Properties dialog box. Table 7-1 describes the functions of the Apps properties sheet. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 73
7-1 Apps Properties Sheet Function Description Global Settings Group box used to manage ICA sessions. ICA Client Settings Click on the ICA Client Settings command button in the Global Settings group box. See "ICA Client Settings" in the Advanced User Interface section for details about ICA - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 74
User Interface 53 Table 7-1 Apps Properties Sheet, Continued Function Description SNMP Update Enable Check this box to enable terminal firmware updates through SNMP. SNMP Network... Use this command button to invoke the SNMP Network Administration dialog box. See "SNMP Firmware Upgrades - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 75
through the Apps properties sheet found in the Terminal Properties dialog box. See "Additional Terminal Applications" for detailed information about the Apps properties sheet. Figure 8-1 shows the Global ICA Settings dialog box. Figure 8-1 Default Hotkeys Properties Sheet Note An ICA session must - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 76
to invoke various functions. Some hotkeys control the behavior of ICA windows, while others emulate standard Windows hotkeys. To set hotkeys, access the Default Hotkeys properties sheet. It is the default properties sheet for the Global ICA Client Settings dialog box. The following figure shows the - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 77
are open in a session, but in the opposite direction. Setting Terminal Preferences Use the Preferences properties sheet to change default settings. To invoke the Preferences properties sheet: 1. Click on the ICA Client Settings command button on the Apps properties sheet. 2. Click the Preferences - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 78
User Interface Table 8-2 Preferences Properties Sheet Function Description Serial Number This is the serial number of your ICA Client software. This field is only necessary when you are using the ICA Windows CE Client with a product such as WinFrame Host/Terminal, which requires each client - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 79
name is 15 characters. Allow Automatic Client Updates check box Use the Client Auto Update feature to store new versions of Citrix ICA Clients. The ICA Client software is stored in a client update database and downloaded to the terminal when a user connects to the Citrix server. Setting the - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 80
60 Advanced User Interface Figure 8-3 Server Location Properties Sheet The following table use HTTP server location Check this box if your firewall restricts UDP broadcasts. This option enables the client to retrieve a list of all Citrix servers on the network and a list of all published - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 81
Advanced User Interface 61 Table 8-3 Server Location Properties Sheet, Continued Function a SOCKS (Socket Secure) firewall. To invoke this properties sheet: 1. Click on the ICA Client Settings command button on the Apps properties sheet. 2. Click the Firewall Settings tab. The properties sheet - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 82
User Interface Table 8-4 Firewall Settings Properties Sheet Function Description Use Alternate Address Through Firewalls By default proxy server between a client and a server. This proxy server then acts as a channel for communication between the client and server. By default the box is not - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 83
Advanced User Interface 63 Setting Up a PNLite PNLite is an ICA connection mode that enables the terminal to connect setup for use with Model T10x0 series terminals. Note PNLite connections are not supported by failover (See "Failover"). To invoke this properties sheet: 1. Click on the ICA Client - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 84
sheet. Table 8-5 PNLite Properties Sheet Function Enable PNLite Server area User credentials area Description Check to enable the PNLite application. Enter the in the User Name, Password, and Domain text boxes. Check the Save password box if you want the password retained on the terminal. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 85
-Up Connections 17 Dial-Up Dialing Properties and Configuration 18 Dial-Up TCP/IP Settings and Security 19 Dial-Up Scripts 20 RDP Connections 21 Terminal Emulation Connections 22 TCP/IP Telnet Configuration 23 Internet Explorer Connections 24 Editing ICA Connections 25 Editing RDP, Dial-Up, and - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 86
9 Creating New Connections The New Connection dialog box is used to create new connections. Figure 9-1 shows the New Connection dialog box. Figure 9-1 New Connection Dialog Box Using the New Connection Dialog Box To invoke the dialog box: 1. Click on the Configure tab in the Connection Manager - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 87
about how to create this kind of connection. Microsoft Remote Desktop Client RDP (Remote Desktop Protocol), which connects to a WTS (Windows Terminal Server) server. See "RDP Connections" for further instructions about how to create this kind of connection. Internet Explorer Local browser - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 88
(Select Citrix ICA Client | Wizard leading to Printing, Compression, Cache, Encryption and Sound dialog box. The box is checked by default. Uncheck the box if you desire to use the standard Windows printer setup. Also un-check the box for CDS printing. Using the Startup Function Your terminal can be - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 89
connection you selected in the Connection Manager as the default connection. The default connection is the connection that always appears in the at startup. Note Autostart status may be modified for individual users using the Add/Modify User Account dialog box accessed from the Security tab. Note - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 90
Connections Wizard When the New Connection dialog box is open (see "Creating New Connections"): 1. Use the drop-down scroll list to select Citrix ICA Client. 2. Click on OK. Figure 10-1 shows the Specify Connection Type dialog box. This is the first dialog box that appears in the series. • Network - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 91
72 Connection Configuration Figure 10-1 Specify Connection Type Dialog Box Network Connections Select Network Connection, then click on the Next button. A Citrix search message displays: Figure 10-2 Citrix Search Message If the connection is found, the following sequence of dialog boxes displays. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 92
Connection Configuration 73 Figure 10-3 Select a Citrix Server or Published Application Dialog Box To use the Select a Server or Published Application dialog box: 1. Click on either Citrix Server or Published Application. 2. Select a server or an application from the drop-down scroll list, or - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 93
74 Connection Configuration Figure 10-4 Server Location Dialog Box 3. If you want to add a server name or IP address, click on the Add command button to invoke the Add Server Address dialog box. Figure 10-5 Add Server Address Dialog Box 4. Enter the name or IP address of the Citrix server. Click - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 94
Connection Configuration 75 Figure 10-6 Select a Title for the ICA Connection Dialog Box Enter a connection in the text box in the Select a Title for the ICA Connection dialog box, then click on Finish. Figure 10-7 Specify an Application Dialog Box To use the Specify an Application dialog box: 1. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 95
76 Connection Configuration Figure 10-8 Specify Logon Information Dialog Box To use the Specify Logon Information dialog box: 1. If needed, enter a user name, a password, and a domain for connecting to an application. 2. Click on Next. Figure 10-9 Select Window Options Dialog Box - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 96
box. Note The ICA server must be capable of supporting 16-bit color for the Thousands selection to work. If not, the terminal will display only 256 (8-bit) colors when Thousands is drop-down menu - Allows selection of Off (default), On, or Auto for possible improvement of screen display performance. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 97
local text to accelerate display of input text on the terminal and provides visual feedback for mouse clicks to show that the user's input is being processed. d. Encryption Level - Drop-down menu allows selection of the encryption level: Basic (default) RC5 (128 bit - Login Only) RC5 (40 bit) RC5 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 98
Connection Note This section applies only to the SE Model terminals. Choose Dial-In Connection, then click on the Next serial connection such as Serial Cable on Com1. 2. Enter the area code, the phone number, and the country code in the appropriate fields. 3. Click on Configure to use the Device - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 99
-Up Configuration Wizard From the New Connection dialog box (see "Creating New Connections"): 1. Use the drop-down scroll list to select Dial-Up Client. 2. Click on OK. Following are the three dialog boxes that display in succession during a dial-up configuration process. When you are finished with - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 100
82 Connection Configuration Figure 11-1 Dial-Up Configuration Wizard 1 To use the first dialog box: 1. Enter a name for your dial-up connection (a maximum of 20 characters but not 2. Click on Next. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 101
connection (serial connection) such as Serial Cable on Com1. 2. Enter your information in the pertinent fields. Country Code and Area Code will activate if Use Country Code and Area Code is enabled. 3. Click on the Dialing Properties command button to open the Dialing Properties dialog box. See - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 102
in Figure 11-3. To use the dialog box: 1. Enter your information in the pertinent fields. If you do not know the information, contact your system administrator. 2. Click on Finish. The Connection Manager displays, listing your new dial-up connection. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 103
Connection Configuration 85 Figure 11-3 Dial-Up Configuration Wizard 3 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 104
the Device Properties dialog box (Figure 12-2). Note See "Null Modem Cable Pin Assignments" for a suggested null modem cable for use with your terminal. Using the Dialing Properties Dialog Box Use the Dialing Properties dialog box to set the dialing properties for your dial-up connection. See "Dial - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 105
88 Connection Configuration Figure 12-1 Dialing Properties Dialog Box The following table discusses the functions of the dialog box. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 106
Settings Set local dialing locale and dialing type in this group box. Local Area Code Enter the local area code that you want to use. Local Country Code Enter the local country code of the country to which you are dialing. The default for this field is 1. Note Refer to a phone directory for - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 107
is 9,G. Local Long Distance Calls Dialing Enter the long distance call dialing pattern. The default is 9,1FG. International Calls Dialing Enter the international call dialing pattern. The default is 9,011,EFG. Note An explanation of the lettering scheme for dialing patterns is located below - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 108
Settings Properties Sheet Function Description Manual Dial Click on this check box to set up for manual dialing. Terminals Use this group box to record terminal windowing information: • Use Terminal Window Before Dialing • Use Terminal Window After Dialing Connection Preferences Use this - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 109
. Table 12-3 Call Options Properties Sheet Function Description Call Setup Use this group box to configure the following call parameters in this field the number of seconds to wait before a call is canceled. The default is 120 with the function enabled. 2. Click the check box to enable the - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 110
13 Dial-Up TCP/IP Settings and Security The following sections provide information about some of the elements of the Dial-Up Configuration Wizard. This chapter covers TCP/IP settings and dial-up security. Using the TCP/IP Settings Dialog Box Click on the TCP/IP Settings command button in the second - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 111
discusses the functions in this dialog box. Table 13-1 TCP/IP Settings Dialog Box Function Description Use Software Compression Click on this check box to enable this function. By default, this function is activated and enabled. Use IP Header Compression Click on this check box to enable - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 112
Accept Any Authentication Including Clear Text (default) Click on this radio button to set your terminal to accept any authentication including clear text from the correct user or application. Accept Only Encrypted Authentication Click on this radio button to set your terminal to accept only - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 113
14 Dial-Up Scripts Dial-up RAS (Remote Access Services) scripts are enabled from the Dial-Up Configuration Wizard (see "Dial-Up Connections"). RAS facilitates PPP communications between the terminal (based on Windows CE) and other non-Windows operating systems. Using the Dial-Up Scripts Dialog Boxes - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 114
98 Connection Configuration Figure 14-1 Script Name Dialog Box Figure 14-2 New Script Name Dialog Box - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 115
. Select another script and click OK. Lists the script input/output strings: • Wait For - Displays strings received from the host. • Respond With - Displays what the terminal sends in response to the Wait For string. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 116
Script Line dialog box (see Figure 14-4). Use this dialog box to create a new line in the script or edit an existing (selected) line. The specific scripts are unique to each target system. Up, Down, Delete buttons Use Up and Down to move a selected line in the script up or down - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 117
an RDP connection. RDP connects to a server running Microsoft WTS (Windows Terminal Server). Using the WTS Connection Wizard When the New Connection dialog box 1. Use the drop-down scroll list to select Microsoft Remote Desktop Client. 2. Click on OK. Following are the four dialog boxes that display - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 118
102 Connection Configuration Figure 15-1 WTS Connection Wizard 1 To use the first dialog box: 1. Enter a name for your dial-up connection in Name. 2. Enter the name or IP address of the server in Server. 3. Check the Low Speed Connection check box if appropriate. 4. Click on Next. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 119
Connection Configuration Figure 15-2 WTS Connection Wizard 2 103 To use the second dialog box: 1. Check the Automatic Logon check box if appropriate. 2. Enter a user name, password, and a domain to complete the information. 3. Click on Next. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 120
104 Connection Configuration Figure 15-3 WTS Connection Wizard 3 To use the third dialog box in the wizard: 1. Click on either the Desktop or Application File Name radio buttons. 2. If you clicked on Desktop, click on Next. 3. If you clicked on Application File Name: a. Enter the name of the - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 121
Connection Configuration Figure 15-4 WTS Connection Wizard 4 105 To use the fourth dialog box, click on Finish. The Connection Manager displays, listing your new RDP connection. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 122
Connections Using the TE Client Connection Wizard When the New Connection dialog box is open (see "Creating New Connections"): 1. Use the drop-down scroll list to select Terminal Emulation. 2. Click on OK. Following are the three dialog boxes of this wizard. When you are finished configuring - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 123
Configuration Figure 16-1 TE Client Connection Wizard - Connection Information To use the Connection Information dialog box: 1. Enter the connection name in Connection Name text box. 2. Select the emulation type in the Emulation scroll list. 3. Select the terminal type from the VT TerminalID - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 124
Configuration 109 Table 16-1 Terminal Emulation and Terminal Type Terminal Emulation Terminal Type Select Emulation: VT52, VT100, VT400 7-Bit (default), or VT400 8-Bit Then select from VT TerminalID: vt100, vt101, vt102, vt125, vt220, vt240, vt320, vt340, vt420 (default), vt131, or vt132 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 125
110 Connection Configuration Table 16-1 Terminal Emulation and Terminal Type, Continued Terminal Emulation Terminal Type Select Emulation: HP70092 Then select from HP Model: 2392A, 70092 (default), 2622A International Settings Opens the International Settings dialog box (see Figure 16-2). - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 126
Connection Configuration 111 Figure 16-3 TE Client Connection Wizard - Host Information To use the Host Information The Automate Login Process dialog box displays. See Figure 16-4 and proceed with these instructions. 3. If you clicked on Modem: a. Select a configuration from Configuration Name. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 127
the Configure command button). c. Click on Next. The Automate Login Process dialog box displays. See Figure 16-4 and proceed with these instructions. Figure 16-4 TE Client Connection Wizard - Automate Login Process To use the Automate Login Process dialog box: 1. Fill in the Parameters group box as - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 128
to open the Printer Port Settings dialog box. Figure 16-5 TE Client Connection Wizard - Printer Port Settings To use the Printer Port Settings dialog . Checking this box enables LPD Hostname text box and the FormFeed Terminator, Translate National Characters, and Auto Line Feed check boxes. Enter - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 129
from the Printer Port list: Parallel Cable on LPT1: (default) Serial Cable on COM1: Serial Cable on COM2: Selecting 3. Click on Next. This will open the GUI Overrides dialog box. Figure 16-6 TE Client Connection Wizard - GUI Overrides To use the GUI Overrides dialog box: 1. Select the appropriate - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 130
Connection Configuration 115 Note After choosing Command Bar Items as an administrator, the terminal must be logged-in as a user to see the effect on the terminal session. Terminal security must be enabled. 2. Select the appropriate function from Action on Host Close. These functions are actions - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 131
17 TCP/IP Telnet Configuration Note The information in this chapter applies to the terminal emulation connection only. Using the TCP/IP Telnet Configuration Dialog Box The Advanced command button on the TE Client Connection Wizard - Host Information dialog box invokes the TCP/IP Telnet Configuration - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 132
to the emulator on a different port than the emulator uses to talk to the host. The default is 0. Telnet Name Enter the Telnet virtual terminal name. The default depends on emulation (VT400, 7-bit, default is vt420). Suppress Use the functions of this group box as needed (controls in this area - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 133
Connection Configuration 119 Table 17-1 TCP/IP Telnet Configuration, Continued Function Description The following image shows the TN3270 Options dialog box, displayed when the 3270 Options command button is pressed. Use this dialog box to set up 3270 options: 3270 LU Device Name - This group - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 134
is pressed. Use this dialog box to set up 5250 options. The options are: Device Name - Name of the device assigned to a Telnet session. User, Password, Library, and Menu - Initial entries on a standard startup screen. Program - Name of the initial program. Note All entries are 10 characters or less - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 135
the Device Properties Dialog Box" for information about this function. Area Code Enter the area code in this text box. Telephone Number Enter the telephone number in this text box. Country Code Enter the country code in this text box. Dialing From: This field automatically lists where you - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 136
122 Connection Configuration Using the Configuration of Serial Cable on Com1 (or Com2) Dialog Box This dialog box opens when the Configure command button is pressed for a serial connection type selection. Figure 17-3 shows this dialog box. Figure 17-3 Configuration of Serial Cable on Com1 (or Com2 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 137
the list and select a value. The defaults are listed (consecutive to the Function list to the left) as follows: • 9600 • None • Input •8 •1 • Unlimited Local Echo Check this check box if you want transmitted characters to appear on the dialup terminal window. Not needed if the destination machine - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 138
. The installed memory is listed on the Terminal Properties window SysInfo and General tabs. When the New Connection dialog box is open (see "Creating New Connections"): 1. Use the drop-down scroll list to select Internet Explorer. 2. Click on OK. This opens the Internet Explorer Setup dialog box - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 139
to an NFuse server that provides ICA links within a Web page to allow ICA sessions to be launched from within a browser window, refer to "NFuse Server Configuration Requirements" for information concerning limitations on the NFuse server application setup for use with Model T10x0 series terminals. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 140
19 Editing ICA Connections The Connection Manager lets you edit individual ICA connection parameters. It is done through the Edit Connection Details dialog box. The following figure shows this dialog box. Figure 19-1 Edit Connection Details Dialog Box - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 141
on the Edit command button on the Configure properties sheet. Using the Server Properties Sheet The Server properties sheet is displayed by default for the dialog box. Table 19-1 describes the functions of the Server properties sheet. Table 19-1 Server Properties Sheet Function Description - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 142
this command button to move a server down the list: 1. Select a server to move down. 2. Click on the Move Down command button. Address Lists the servers. Default List Lists the default servers. Network Protocol Lists the network protocol used by the server. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 143
130 Connection Configuration Using the Application Properties Sheet The Application properties sheet is shown in Figure 19-2. Figure 19-2 Application Properties Sheet Invoke the properties sheet by clicking on the Application tab. Table 19-2 describes the functions of the properties sheet. Table - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 144
Logon tab. Table 19-3 describes the functions of the Logon properties sheet. Table 19-3 Logon Properties Sheet Function Description Username Enter the user name used to log into the server. Password Enter the password used to log into the server. Domain Enter the domain name of the server. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 145
132 Connection Configuration Using the Window Properties Sheet The Window properties sheet is shown in the following figure. Figure 19-4 Window Properties Sheet - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 146
work. If not, the terminal will display only 256 (8-bit) colors when Thousands is selected. When using a PPP connection, 16 color mode may provide faster performance. If the window options specified exceed the capabilities of the client hardware, the maximum size and color depth supported by the CE - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 147
19-5 Options Properties Sheet Function Description Use Printer Configuration Utility Check this box (default) to allow creation of a new printer in the ICA Client Printer dialog box on the ICA server. Uncheck to use Windows to add a printer. Compress Data Stream Check this check box to enable - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 148
Configuration 135 Table 19-5 Options Properties Sheet, Continued Function Description SpeedScreen Drop-down list box. Select from: • Off (default) • On • Auto SpeedScreen is a combination of technologies implemented in ICA that decreases bandwidth consumption and total packets transmitted - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 149
136 Connection Configuration Using the Title Properties Sheet The Title properties sheet is shown in Figure 19-6. Figure 19-6 Title Properties Sheet This properties sheet contains only one function. Enter the title of your ICA connection in the text box on the sheet. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 150
19-6 Firewall Settings Properties Sheet Function Description Use Alternate Address Through Firewalls Click on this check box to enable the function. By default the box is unchecked. SOCKS SOCKS (Socket Secure) is networking proxy protocol. It enables hosts on one side of a SOCKS server to - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 151
Use Enter in this text box the IP address of the SOCKS proxy server. Activate this box by clicking on Connect Via SOCKS Proxy. By default this box is deactivated. Port Enter the port number to connect to. Activate this box by clicking on Connect Via SOCKS Proxy. By - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 152
Wizard. See "Dial-Up Connections" for detailed information about using this wizard. To edit terminal emulation you invoke the TE Client Connection Properties dialog box. See "Terminal Emulation Connections" for detailed information. RDP Connections The Connection Manager lets you edit individual RDP - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 153
140 Connection Configuration Figure 20-1 Edit Connection Dialog Box Using the Edit Connection Dialog Box The Edit Connection dialog box includes two properties sheets. Depending on your connections configuration, you use one of these properties sheets to edit connection parameters. To invoke the - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 154
Properties Sheet The Net Connections properties sheet is displayed by default for the Edit Connection dialog box. Use this properties sheet your terminal. Enabling this function enables the Username, Password, and Domain fields: Username Enter your user name. Password Enter your password. Domain - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 155
142 Connection Configuration Using the Application Properties Sheet Invoke the Application properties sheet by clicking on the Application tab in the Edit Connection dialog box. Use this properties sheet to reconfigure the applications-related portion of the connection. Figure 20-2 shows this - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 156
path name of an application that will run. Working Directory Enter the path to the working directory that the application will use. Note The terminal will not create a new directory if the entered working directory does not exist. Note Desktop and File Name are mutually exclusive. File Name must - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 157
Managing Network Adapters 28 Add-On 29 Aironet Wireless LAN Adapter Setup 30 PC Card Adapters for Modems 31 Touchscreens 32 Date/Time Properties 33 JETCET PRINT 34 Local Printers 35 PC Card Adapters for Token Ring Networks 36 SNTP Client 37 PC Card Adapters for Wireless Networks 38 Volume Properties - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 158
sheets for the SE models and LE models, respectively. To open the Devices properties sheet, 1. Press F2 to open the Terminal Properties dialog box. 2. Click on the Devices tab in the Terminal Properties dialog box. Devices Properties Sheet Table 21-1 describes the functions of this properties sheet. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 159
148 External Devices Figure 21-1 Devices Properties Sheet - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 160
Adapters for Modems" in External Devices. By default this command button is activated. Add/Change PC card modem is inserted in to the terminal's PC card slot. For detailed information see " to invoke the Aironet Wireless Lan Adapter Setup dialog box. For detailed information see "Aironet - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 161
information see "PC Card Adapters for Token Ring Networks" in External Devices. SNTP Client Click on this icon to invoke the SNTP Client dialog box. For detailed information see "SNTP Client" in External Devices. Touchscreen Click on this icon to invoke the MicroTouch Touchscreen Properties - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 162
22 Managing Network Adapters An adapter is a device that physically connects a terminal to a network. The Adapters Configuration dialog box gives you the ability to configure the adapters on a terminal. Figure 22-1 shows the dialog box. Figure 22-1 Adapters Configuration Dialog Box - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 163
through DHCP option 12. If your DHCP server has this capability, check this box if you want your terminal to use this assigned name (default is Not Checked). Properties... Click on this command button to invoke a properties dialog box. In the properties dialog box are the IP Address properties - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 164
Properties Sheet Function Description Obtain an IP Address via DHCP Click on this radio button to let the terminal obtain an IP address automatically using DHCP. This button is selected by default. Specify an IP Address Click on this radio button to enter an IP address, subnet, and gateway. By - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 165
enter the IP addresses of the DNS and WINS servers for the terminal using the adapter. Figure 22-3 shows the Name Server properties sheet server. By default this text box is blank. Primary WINS Enter the IP address of your primary WINS (Windows Internet Naming Service) server. By default this text - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 166
you remove firmware add-ons and to display information about available flash memory. To open this dialog box: 1. Press F2 to open the Terminal Properties dialog specific firmware add-on, select it from the list and click Remove.... Follow the prompts to complete the removal process. The terminal - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 167
156 External Devices Figure 23-1 Uninstall Dialog Box - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 168
External Devices 157 Add-on Dialog Box System Tab Figure 23-2 shows the System tab section of the Add-on dialog box. It displays information about available flash memory and has no user controls. Figure 23-2 System Dialog Box - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 169
24 Aironet Wireless LAN Adapter Setup The Aironet dialog box (Figure 24-1) allows you to configure the Aironet wireless LAN adapter solely by menu selections. To open this dialog box: 1. Press F2 to open the Terminal Properties dialog box. 2. Click on the Devices tab. 3. Double-click on the Aironet - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 170
160 External Devices Using the Aironet Dialog Box To configure the wireless LAN adapter, select a property from the Property list and select the desired value from the Value drop-down menu. Repeat the process for each listed property. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 171
25 PC Card Adapters for Modems Your WBT supports PCMCIA adapted modems. This chapter discusses the setup for PCMCIA modems. Figure 25-1 shows the Add or Change Modem dialog box. Use this dialog box to set up a PCMCIA modem. To open the - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 172
group box to set the following flow settings: Flow Hardware Enter a flow hardware command string in this field. The default is AT&K3. Flow Software Enter a flow software command string in this field. The default is AT&K4. Flow Off Enter a flow hardware command string in this field. The - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 173
External Devices 163 ISDN Settings Use the ISDN Settings dialog box to set the terminal's ISDN (Integrated Services Digital Network) settings. If you do not know this information, ask your system administrator. Figure 25-2 shows the dialog box. To invoke the dialog box, click on the ISDN Settings - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 174
configure the following ISDN parameters: Switch Type Use this drop-down scroll list to select the switch type. The default is North America. Service Profile ID 1 Use this field to enter Service Profile ID 1. Only numbers are allowed in this text box. Note Enter the SPID provided by your ISDN line - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 175
26 Touchscreens Your WBT supports touchscreens. This chapter discusses the setup for the two touchscreens the terminal supports, ELO and MicroTouch. ELO Touchscreen Figure 26-1 shows the ELO Touchscreen dialog box. Use this dialog box to calibrate an ELO touchscreen. To open this - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 176
• Disable • Serial Cable on COM1 • Serial Cable on COM2 The default for the list is Disable. Calibrate Click on this command button to calibrate is not connected to one of the terminal's Com ports or USB connectors. Note After a Com port is selected, the terminal must be restarted. When you click - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 177
Properties dialog box. Use this dialog box to set up a Microtouch touch screen. To invoke this dialog box: 1. Press F2 to invoke the Terminal Properties dialog box. 2. Click on the Devices tab. 3. Double-click on the Touchscreen icon in the properties sheet's icon container. Figure 26-2 Microtouch - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 178
below). Controller Type This field shows the controller type. Firmware Version This field shows the firmware version. Status This field shows the status: • OK • Not Found If there is no MicroTouch touch screen connected to the terminal, the Status field will display Not Found. Connection Use - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 179
External Devices 169 Cursor Properties Sheet The Cursor properties sheet is shown in Figure 26-3. Figure 26-3 Cursor Properties Sheet Table 26-3 discusses the Cursor properties sheet. Table 26-3 Cursor Properties Sheet Function Description Cursor Offset Use this properties sheet to set the - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 180
170 External Devices Table 26-3 Cursor Properties Sheet, Continued Function Description Set Click on this command button to invoke a dialog box that will allow you to set distances: Stabilize Cursor Follow the instructions on the dialog box. This command button is always deactivated. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 181
External Devices 171 Touch Settings Properties Sheet Figure 26-4 shows the Touch Settings properties sheet. Figure 26-4 Touch Settings Properties Sheet The following table discusses this properties sheet. Table 26-4 Touch Settings Properties Sheet Function Description Touch Mode Use this - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 182
cross-hair. The cross-hair will move to the upper right-hand corner. 2. Touch the cross-hair. The Calibration Complete dialog box displays. 3. Follow the instructions in the Calibration Complete dialog box to complete the calibration process. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 183
/Time Properties The Date/Time Properties dialog box (Figure 27-1) allows you to set the date and time on the terminal. To open this dialog box: 1. Press F2 to open the Terminal Properties dialog box. 2. Click on the Devices tab. 3. Double-click on the Date/Time-on icon in the icon container - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 184
174 External Devices Note If a time server is available (See SNTP Client chapter), the terminal time will automatically synchronize to the time provided by the server. Otherwise, the time must be set manually. To manually set the time, enter a time slightly ahead of the actual time in Current Time - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 185
28 JETCET PRINT JETCET PRINT Professional is a utility that supports local printing from your Windows CE-based terminal. JETCET only supports IE 4.0. ICA, RDP, or terminal emulations do not use the JETCET printer driver. The JETCET PRINT Professional dialog box (Figure 28-1) allows you to select - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 186
PocketJet • PocketJetII • PostScript Note These are the only supported printers. Serial Handshaking drop-down list box Spooler area Allows selection of software or hardware handshaking between the terminal and the printer. Default is software. Controls in this area are used to select print spooler - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 187
External Devices 177 Table 28-1 JETCET PRINT Professional Dialog Box Settings, Continued Function Description Display this Dialog While Printing check box Check if you want this dialog box to automatically open when printing. Properties... command button Opens the Printer Properties dialog - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 188
178 External Devices Figure 28-3 Printer Properties Dialog Box, Dithering Tab Figure 28-4 Printer Properties Dialog Box, Toner Saver Tab - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 189
External Devices Figure 28-5 Printer Properties Dialog Box, Layout Tab 179 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 190
29 Local Printers The terminal supports both Line Printer Daemon (LPD) printing and printing from applications. LPD Printing This paragraph discusses the configuration of local printing using the LPD Config dialog box. Note LPD can only be used with the parallel port of a terminal. Figure 29-1 LPD - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 191
a logical device assigned when you set up LPD services on your server. The default for this field is 515. Send Form Feed driver for a connected printer. Printers Properties Sheet Figure 29-2 shows the Printers properties sheet. To invoke this properties sheet: 1. Press F2 to invoke the Terminal - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 192
External Devices Figure 29-2 Printers Properties Sheet 183 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 193
, Com2, LPT1). Lists the name, type, and whether it is the default printer. Add / Properties command button Delete command button Select a port in this on the button opens the Printer Properties dialog box, which enables the user to either select a printer for the port or change the printer - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 194
the name by which you will refer to this printer. If you want this to be the default printer, check the Make this the default printer box (this will de-select another printer previously selected as default). Click OK to accept the properties and close the box or click Cancel to cancel the - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 195
30 PC Card Adapters for Token Ring Networks Note This chapter applies only to the Model T1010 terminal. Your WBT supports PCMCIA RACORE token ring adapter cards. This chapter discusses the setup for RACORE token ring card. Figure 30-1 shows the RACORE Token Ring Adapter Settings dialog box. Use this - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 196
30-1 discusses the dialog box. Table 30-1 RACORE - Token Ring Adapter Settings Function Description User Defined MAC Address Use this text field to enter the MAC address of the token ring PC card. The default is 000000000000. Token Ring Speed Use this group box to select the speed of your - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 197
this dialog box to select the SNTP server and to synchronize the terminal time. Note SNTP client is available only when IE4 is installed. Using the SNTP Client Dialog Box To invoke this dialog box: 1. Press F2 to invoke the Terminal Properties dialog box. 2. Click on the Devices tab. 3. Click on the - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 198
Table 31-1 discusses the dialog box. Table 31-1 SNTP Client Settings Function SNTP Server drop-down list box Add, Edit, if you want the terminal to automatically synchronize to the SNTP time server when the terminal boots. Default is checked. Causes the terminal time to immediately synchronize to - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 199
Your WBT supports PCMCIA adapters for WaveLAN wireless networks. This chapter discusses the setup for these adapters. Figure 32-1 shows the WaveLAN/ IEEE Settings dialog box. Using the WaveLAN/IEEE Settings Dialog Box To invoke this dialog box: 1. Press F2 to invoke the Terminal Properties dialog - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 200
to enable Ad-hoc Demo Mode. Enabling this mode will allow the terminal to connect to a small wireless workgroup. In this mode the terminal will: • Ignore WaveLAN Network Name. • Ignore WavePOINT-ll access points. • Fix the radio to operate at factory default. By default the check box is unchecked. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 201
Note Advanced properties normally should not need to be changed. The default values should be sufficient for normal network use. Figure 32-2 Advanced Properties Sheet Function Description MAC Address Enter in this field a user assigned MAC address. You will not have to change this parameter for - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 202
point density) value. This parameter controls the roaming sensitivity of the terminal. The values are: • Low Density • Medium Density • High points in the network. • The configuration of the access points. The default is Low Density. Transmit Rate Select in this scroll box the transmission rate - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 203
of a portable device. When Card Power Management is enabled, the other functions of the properties sheet are activated. By default the box is unchecked. Receive All Multicasts Click to check this box to enable the terminal to wake up and receive multicasts. The default for this box is deactivated - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 204
196 External Devices Encryption Figure 32-4 shows the Encryption properties sheet. Figure 32-4 Encryption Properties Sheet Table 32-4 discusses the properties sheet. Table 32-4 Encryption Properties Sheet Function Description Enable Encryption check box Check this box to enable encryption. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 205
33 Volume Properties Your WBT supports audio for the ICA client. This chapter discusses the audio controls (see below). Note This volume control will function only before Windows Media Player is launched. Figure 33-1 Volume Properties Dialog Box - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 206
Dialog Box To invoke this dialog box: 1. Press F2 to invoke the Terminal Properties dialog box. 2. Click on the Devices tab. 3. Click on the : • Events - warnings, beeps and system events. • Applications - program specific and all other sounds. If this box is unchecked, Notifications is disabled ( - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 207
Firmware Upgrades 39 Cable Firmware Upgrades 40 FTP Pull Firmware Upgrades 41 SNMP Firmware Upgrades 42 DHCP Firmware Upgrades - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 208
of firmware download. The cable method for all terminals is parallel download, using a Laplinkcable and the MS-DOS xfer.exe program. Caution Do not power the terminal off during the upgrade. Note 1. Installation of add-ons can not be performed through this method. 2. This method does not support - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 209
procedure includes manual download instructions. The download procedure will not work unless your PC is booted to DOS. 1. Record the terminal's current configuration. Caution All previous settings will be lost. Upgrading the firmware defaults the current configuration to the factory default settings - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 210
Firmware Upgrades 203 Manual Download Use the following instructions to perform a manual download. 1. Type xfer at the DOS prompt 2. Press Enter, and the Download Utility dialog box appears. See the following figure. Figure 34-1 Download Utility Dialog Box 3. Power-up the terminal - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 211
204 Firmware Upgrades Cable Pinouts Parallel Download Cable Pinouts The following table lists the parallel download cable pinouts. Table 34-1 Parallel Download Cable Pinouts PC Side Terminal Side Pin 01 Pin 01 Pin 02 Pin 15 Pin 03 Pin 13 Pin 04 Pin 12 Pin 05 Pin 10 Pin 06 Pin 11 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 212
Firmware Upgrades 205 The following figure shows the connections for the parallel download cable. Figure 34-2 Parallel Download Cable Connectors 13 1 25 14 DB-25M Pin 1 2 3 4 5 6 7 8 9 Terminal 10 Parallel 11 Port 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Not - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 213
35 FTP Pull Firmware Upgrades Use the Upgrade properties sheet to: 1. Set up a terminal for communication with an FTP server. 2. Perform FTP pull upgrades. See Figure 35-1. Using the Upgrade Properties Sheet To invoke this properties sheet: 1. Press the F2 key. 2. Click on the Upgrade tab in the - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 214
208 Firmware Upgrades Figure 35-1 Upgrade Properties Sheet The following table describes the functions found on this properties sheet. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 215
reside. The default is blank. User ID Enter your user account in this field. The default is anonymous. Password Enter your password in this field. The default is *****. Status This display box shows status information about the connection to the FTP server, and the firmware download. Connect and - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 216
must be installed on your FTP server to upgrade your terminal. The upgrade firmware can be obtained through the manufacturer's customer support. Download is initiated through the Upgrade command button on the Upgrade properties sheet. Information in the Upgrade properties sheet must be filled out to - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 217
displays. Read for information and click on Start to upgrade, or Cancel to quit the process. Note If you are downloading the same version of firmware that is already on the terminal, a dialog box displays reporting that you are downloading the same version. Figure 35-3 Firmware Upgrade Dialog Box 2 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 218
212 Firmware Upgrades Click on Start to begin the download. The process is: • The image gets read. • The flash gets erased. • The image gets written to the flash. When the upgrade is complete, the terminal will reboot to the Connection Manager. Note If the downloaded image is a lower version from - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 219
36 SNMP Firmware Upgrades Using the SNMP Network Administration Dialog Box The SNMP Network Administration dialog box contains the functions that you can use to administer to the terminals on your SNMP network. See Figure 36-1. To invoke this dialog box: 1. Press the F2 key to invoke the Terminal - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 220
214 Firmware Upgrades Figure 36-1 SNMP Network Administration Dialog Box The following table discusses the functions of this dialog box. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 221
management software will manage with write permission. The default for this field is WBTADMIN. Note All Get and Set names are case sensitive. Trap Destination Server 1:, Server 2:, Server 3:, and Server 4: are fields that supply the names or IP addresses of the servers to which the terminal sends - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 222
216 Firmware Upgrades Table 36-1 SNMP Network Administration Dialog Box, Continued Function Description Terminal Information Use this group box to list information about terminals. Description Use this group box to describe a terminal. (Optional) Location Type the location of the terminal in - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 223
its value to 1 (Ready). Step 4h will initiate an SNMP upgrade to your terminal. If the download is configured properly, the new image will download and the terminal will reboot automatically. Refer to Chapter 31, FTP Pull Firmware Upgrades, to view the dialog boxes that display during the process. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 224
37 DHCP Firmware Upgrades Using the Change DHCP Option IDs Dialog Box Use the Change DHCP Option IDs dialog box to set up DHCP option IDs for terminal administration and upgrade. See Figure 37-1 for a view of this dialog box. Your terminal uses DHCP and the information on the Change DHCP Option IDs - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 225
220 Firmware Upgrades Figure 37-1 Change DHCP Option IDs Dialog Box Note Option 158 is not supported yet. It is reserved for future use. The following table describes the functions of this dialog box. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 226
Firmware Upgrades Server • Logon User Name • Domain • Logon Password - reserved for Terminal Emulation Group box used to set the following terminal emulation Option IDs option IDs: • Emulation Mode • Terminal ID Reset To Defaults Click on this command button to reset all option IDs to the default - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 227
location of the firmware). If they are not correct, the upgrade will fail. Note You will need the image and the params.ini files on the FTP server to do the upgrade. 8. Shut down the terminal. See "Shutting Down the Terminal" for more information. Your terminal will automatically upgrade itself when - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 228
Firmware Upgrades 223 Manual DHCP Firmware Upgrades 1. Follow instruction 1 through 3 and 5 through 8 in "Automatic Firmware Upgrades." 2. Click on the Upgrade... command button on the Upgrade properties sheet. This will initiate the firmware upgrade. Once the upgrade is complete, the terminal - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 229
Client Security 43 Security Properties 44 Terminal Accounts 45 Creating Terminal Accounts 46 Modifying and Deleting Terminal Accounts 47 Terminal Login 48 Failover - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 230
38 Security Properties Use the Security properties sheet to access security functions and global terminal functions. You can also use this sheet to set up terminal accounts. Figure 38-1 shows the Security properties sheet. Using the Security Properties Sheet To invoke the Security properties sheet: - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 231
228 Client Security Figure 38-1 Security Properties Sheet The following table describes the functions of this properties sheet. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 232
configurations. It contains the following functions: Security Enable Click to enable terminal security and deactivate the Hide Configure Tab function. It forces a user to log in if autologin is not enabled. By default this function is disabled. Checking this box disables the Hide Configure Tab - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 233
function is enabled by default if DHCP is enabled (Network dialog box). Connection Name and Type A scroll list that displays all connections available to your terminal. You must select the connection that will use information supplied by DHCP. By default this function is Default ICA Connection {ICA - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 234
connection if the disconnect is valid. By default the function is not selected. It reconnects user. Reset Hot Key Enable Check this box to enable hot key reset. User Accounts Add User Modify User Delete User Note The hot key reset function must be performed as directed by the system administrator - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 235
into an account and assigned to a terminal user. Terminal accounts can include specific connections, privileges, password protection, Autologin and/or Autostart and Single Button Connect functions. The three types of accounts are: • Guest • User • Administrator Guest Accounts The Guest account has - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 236
buttons. Terminal accounts are deleted using the Delete User... command button. These buttons are found on the Security properties sheet. Note There is a built-in account called Administrator. It can not be deleted or revised. The account's password can be changed and is by default. For - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 237
Client Security For more information about terminal accounts, see: • "Security Properties" • "Creating Terminal Accounts" • "Modifying and Deleting Terminal Accounts" 235 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 238
Account dialog box is used to create terminal accounts. The following figure shows this dialog box. Using the Add User Account Dialog Box Use the Add User Account dialog box to set up the parameters for new terminal accounts. To invoke this dialog box: 1. Press F2 while in the Connection Manager - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 239
238 Client Security Figure 40-1 Add User Account Dialog Box The following table describes the functions of the Add User Account dialog box. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 240
default Enable Password Change is deactivated. User Name Type in the new user name. By default the field is blank. Password Type in the password. By default the field is blank. Confirm Password Type in the password again. By default the field is blank. This is a list box displaying all the terminal - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 241
Client Security Table 40-1 Add User available to a terminal account. Type administrator to an account. If this function is enabled: • All connections in Available Connections are automatically assigned to Connection Name for use. • Enable Password Change is deactivated but enabled. Administrators - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 242
Click this radio button to assign the privilege of user to an account. If User is enabled, Enable Password Change is activated. Administrators can give users the ability to change their password. Guest (default) Click this radio button to assign the privilege of guest to an account. If Guest is - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 243
for the account being modified shows in the dialog box title bar. Using the Modify User Account Dialog Box To invoke this dialog box: 1. Press F2 from the Connection Manager. 2. Click on the Security tab in the Terminal Properties dialog box. 3. Highlight the account to be modified and click on the - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 244
244 Client Security Figure 41-1 Modify User Account Dialog Box The following table describes the functions of the Modify User Account dialog box. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 245
Password Change is deactivated. User Name Displays the user name. By default the text box is deactivated. Password Type in the password. By default the text box is blank. Confirm Password Type in the password again. By default the text box is blank. This is a list box displaying all the terminal - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 246
246 Client Security Table 41-1 Modify User Account Dialog Box, Continued Function Description Assign buttons to rearrange the list. Connection Name This list shows the connections available to a terminal account. Type This section of the list displays the connection type of each connection. See - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 247
account type can not change passwords. Allow Access to Connection Manager Click on this check box to allow the user of the account to have access to the Connection Manager. The function will deactivate when you set up an account as an administrator account. By default the function is disabled. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 248
Delete User... command button. The following dialog box will display. Figure 41-2 Delete User Account Confirmation Dialog Box To delete the listed account, click on the Yes command button. The terminal account is removed from the database. Note You cannot delete the built-in Administrator account - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 249
42 Terminal Login Terminal login is used as a terminal security measure. Only users with the correct User Name and Password will be able to log into the terminal. Figure 42-1 shows the Terminal Login dialog box. Figure 42-1 Terminal Login Dialog Box Logging Into the Terminal To use the login feature - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 250
250 Client Security 1. Type in the correct User Name and Password. 2. Click on OK to log into the terminal again. Autologin and Autoconnect Autologin The autologin feature is an automatic login function that does not use a dialog box as a prompt to log you into your terminal again. Whether you - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 251
Client Security 251 1. Enable security. 2. Select the account you want Autostart added to and click on the Modify User... command button. 3. Use the Modify User dialog box to add Autostart. 4. Restart or log off of your terminal. The Terminal Login dialog box displays. Use it to log into your - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 252
252 Client Security Figure 42-3 Single Button Connect Dialog Box To enable this function: 1. Press F2 to invoke the Terminal Properties dialog box. 2. Click on the Security tab to invoke the Security properties sheet. 3. Highlight the user's name in User Accounts. 4. Click on the AutoLogin Enable - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 253
node. Ping then waits to receive the echo response from that selected node. Failover operates as follows: Note Failover does not support PNLite connections. 1. The terminal pings the intended connection, to determine whether or not it is available. 2. If pinging the intended device fails, the - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 254
254 Client Security If failover pings all the connections in the list and a connection is not made, the function stops. The following error message displays. Figure 43-1 Failover Message Box Once failover is finished, the Failover Log Window dialog box displays. Figure 43-2 shows this dialog box. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 255
Getting Help 44 Windows-based Terminal Specifications 45 How to... 46 Terminal Port Pin Assignments 47 Terminal Connector Pin Assignments 48 Null Modem Cable Pin Assignments 49 Modem AT Commands - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 256
44 Windows-based Terminal Specifications Specifications for the Windows-based terminals covered in this manual are listed in the following tables: • Model T1000, Table 44-1 • Model T1010, Table 44-2 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 257
Help Table 44-1 Winterm Model T1000 Terminal Specifications Description Terminal Type Specification Modular Windows-based terminal • Integrated Microsoft RDP and Citrix ICA 3 protocols and terminal personalities (standard) Display Support1 • VESA monitor support, with DDC for automatic setting - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 258
259 Table 44-1 Winterm Model T1000 Terminal Specifications, Continued Description Networking Specification • TCP/IP with DNS and DHCP • 10/100BaseT Fast Ethernet, twisted pair (RJ-45) • Point-to-Point Protocol (PPP) • Multiple master browser support on ICA • Supports Citrix load balancing on ICA - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 259
Help Table 44-1 Winterm Model T1000 Terminal Specifications, Continued Description Setup and Configuration Specification User Interface • Local boot • Start-up wizard for simple set-up • See Table 3-1 for keyboard languages supported Configuration • Configurable automatic login • Individual - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 260
Winterm Model T1000 Terminal Specifications, Continued Description Regulatory Compliance Specification Ergonomics supported in a future software release. 3Keyboard not included with international models. 4For supported peripherals, rever to http://www.compaq.com. Warning Your Model T1000 terminal - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 261
Help Table 44-2 Winterm Model T1010 Terminal Specifications Description Terminal Type Specification Modular Windows-based Terminal • Integrated Microsoft RDP and Citrix ICA 3 protocols and terminal personalities (standard) Display Support1 • VESA monitor support, with DDC for automatic setting - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 262
/ Support • Microsoft Windows 2000 Server • Microsoft Windows NT Server 4.0, Terminal Server Edition • Citrix WinFrame • Citrix MetaFrame, the Citrix enhancement to Microsoft Windows NT Server 4.0, Terminal Server Edition • Citrix Device Services (included) Setup and Configuration User Interface - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 263
264 Getting Help Table 44-2 Winterm Model T1010 Terminal Specifications, Continued Description Environment Specification Temperature Range • Powered on: 32° to 104°F (0° to 40°C) • Powered off: -14° to 140°F (-10° to 60°C) • Convection cooling, fanless design Humidity • 20 to 80% noncondensing - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 264
Security properties sheet to return to Connection Manager. Check your terminal's build number and firmware revision: 1. Press F2 on your keyboard to invoke the Terminal Properties dialog box. 2. Read the build number and firmware revision listed in Version: on the General properties sheet. 3. Click - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 265
default) or Left-handed. 5. Use the sliders in the Pointer Acceleration and Pointer Speed boxes to adjust your mouse speed. 6. Click on the OK command button on the Mouse Properties dialog box and click on Close on the Terminal scroll list Dial-Up Client, then click OK Use Country Code and Area Code - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 266
factory defaults. Note If the above reset procedure fails, call technical support at Compaq (800-OKCOMPAQ) for instructions on using a hot-key reset procedure. Determine the size of the onboard memory: 1. Press F2 on your keyboard to invoke the Terminal Properties dialog box. 2. Read the firmware - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 267
on Connect to Printer on the Printer menu. 4. Click on Client Network, then Client on the Shared Printer menu. 5. Select your , then dialog box. The box is checked by default. Uncheck the box if you desire to use the standard Windows printer setup. Also un-check the box for CDS - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 268
server: a. Click on Start, then Programs. b. Click on MetaFrame, then Tools. c. Click on ICA Client Printer Configuration. 3. If it is a WinFrame server: a. Click on ICA Client Printer Configuration in the Administrative Tools program group in the Program Manager. b. Click on New on the Printer menu - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 269
and parallel ports. These ports are located on the back panel of your terminal. See Terminal Installation for information about terminal back panels. Figure 46-1 Serial Port 1 5 6 9 DB-9M Terminal Com Port Pin Signal Name Pin 1 Carrier Detect (DCD) 1 2 Receive Data (RX) 2 3 Transmit - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 270
- Error - Initialize - Select Input Ground 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18-25 Parallel Device Note The pin assignments for Terminal Parallel Port above are Centronics-compatible. The pin assignments for Parallel Device above are the standard pin assignments for a parallel device. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 271
The following figure shows the pin assignments for the 10Base-T and 100Base-T connector. This connector is located on the back panel of your terminal. See "Terminal Features" for information about the back panel. Note It is recommended that you use Category 5 twisted-pair cable to connect your - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 272
274 Getting Help The following figure lists the connector pin assignments for the terminal's VGA connector. This connector is located on the back panel of your terminal. See "Terminal Features" for information about the back panel. Figure 47-2 VGA Connector 5 10 15 1 6 11 Pin 1 2 3 4 5 6 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 273
4 (request to send) 8 (clear to send) 5 (clear to send) 7 (request to send) 6, 8 (data set ready, carrier detect) 4 (data terminal ready) 7 (ground) 5 (ground) 20 (data terminal ready) 6, 1 (data set ready, carrier detect) Note All other pins on either connector of the cable are not used. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 274
E1 Enable character echo to terminal in command mode H, H0 codes (Verbose enabled) W2 Negotiation progress codes disabled. Result code is DCE rate X4 Modem recognizes dialtone and busy, CONNECT nnnn result code enabled Y, Y0 Disable long-space disconnect Z, Z0 Reset modem and recall User - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 275
&F, &F0 Recall factory settings as active configuration &M0 Asynchronous mode &N, &N0 Microcom QX/4232hs-compatible numeric result codes displayed &Q5 Error &W, &W0 Save active configuration as User Profile 0 &Y, &Y0 Recall User Profile 0 on power-up Table 49-3 AT Commands Beginning - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 276
flow control \S Display current Configuration, Long Version \V, \V0 Disable /REL connect codes \X, \X0 XON/XOFF pass-through disabled 279 Table 49-4 AT Commands Beginning Line Signal Level in -dBm %Q Report Line Signal Quality %R Display all S registers %V Display firmware version - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 277
Chart The following chart is provided to help network administrators make remote configuration changes to WBTs in a managed Groups, and Network and Connections Groups in the network administrator's guide. You can use the Remote Administrator or an SNMP management tool and the following chart to - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 278
282 Appendix A For the Logical Object... wbt3I/ODevice Group wbt3kbLanguage wbt3CharacterRepeatDelay wbt3CharacterRepeatRate You Can Write... To Modify... Any of the following numbers: The Locale scroll list on the Input properties sheet 0 = English-US 1 = English-UK 2 = French 3 = German 4 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 279
Appendix A 283 For the Logical Object... wbt3Display Group wbt3EnergySaver wbt3ScreenTimeOut wbt3TouchScreen wbt3DispCharacteristic Group wbt3DispFreq Note This can not be set if DDC is used. wbt3DispHorizPix wbt3DispVertPix You Can Write... To Modify... Any following number: 0 = none 1 = use a - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 280
option to change the default Option 160 to another option The Remote Server field in the Change DHCP Option ID's dialog box The Logon User Name field in the Change DHCP Option ID's dialog box The Domain field in the Change DHCP Option ID's dialog box The Logon Password field in the Change - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 281
that corresponds to a DHCP option to change the default Option 166 to another option An integer that corresponds to a DHCP option to change the default Option 167 to another option To Modify... The the Change DHCP Option ID's dialog box The Terminal ID field in the Change DHCP Option ID's dialog box - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 282
integer that corresponds to a DHCP option to change the default Option 168 to another option To Modify... The Server field SNMP Network Administration dialog box The Field 2: text box in the SNMP Network Administration dialog box The Field 3: text box in the SNMP Network Administration dialog box - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 283
alphanumeric character to a text string This object does not correspond to any fields in the UI Any following integer: 0 = request upload 1 = request download This object does not correspond to any fields in the UI Any alphanumeric character to a text string This object does not correspond to - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 284
the UI The Reset the Terminal to Factory Default Property Settings check Upgrade properties sheet The User ID text box on the Upgrade properties sheet The Password text box on the Upgrade properties sheet The Save Password check box on the Upgrade properties sheet The Status text box on the Upgrade - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 285
the Security properties sheet The Verbose check box on the Security properties sheet The Autologin Enable check box on the Security properties sheet The User Name scroll list on the Security properties sheet The Single Button Connect check box on the Security properties sheet The Auto Fail Recovery - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 286
to a text string using a maximum of 60 characters The Server 1 text box in the SNMP Network Administration dialog box The Server 2 text box in the SNMP Network Administration dialog box The Server 3 text box in the SNMP Network Administration dialog box The Server 4 text box in the SNMP Network - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 287
100Mbs-half duplex 8 = 10Mbs-full duplex 9 = 10Mbs-half duplex To Modify... The Enable DNS check box in the Advanced Network Settings dialog box The Default Domain text box in the Advanced Network Settings dialog box The Primary Server IP Address text box in the Advanced Network Settings dialog box - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 288
292 Appendix A For the Logical Object... wbt3RDPencryption wbt3VirtualPortServerIPaddress wbt3com1Share wbt3com2Share wbt3parallelShare ICAStatusDialog ICAStatusDialog2 ICACloseRemoteApplication ICACloseRemoteApplication2 You Can Write... wbt3Apps Group Any following integer: 0 = checked 1 = - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 289
Appendix A For the Logical Object... ICAtoggleTitleBar ICAtoggleTitleBar2 ICActrlAltDel ICActrlAltDel2 ICActrlEsc ICActrlEsc2 ICAaltEsc ICAaltEsc2 ICAaltTab 293 You Can Write... Any following integer: 0 = ctrl 1 = shift Any integer from 0..9 0 = ctrl Any integer from 0..9 0 = ctrl Any integer from - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 290
Manager Any following integer: 0 = RDP 1 = ICA 2 = TEC 3 = DialUp The Type list in the Winterm Connection Manager Any following integer: 1 = active 2 = not in service 3 = not ready 4 = create and go 5 = create and wait 6 = destroy The Connection Name list in the Winterm Connection Manager - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 291
Appendix A For the Logical Object... wbt3RDPConnections Group wbt3RDPConnServer wbt3RDPConnLowSpeed wbt3RDPConnAutoLogon wbt3RDPConnUserName wbt3RDPConnDomain wbt3RDPConnStartApplication wbt3RDPConnFilename wbt3RDPConnWorkingDir 295 You Can Write... To Modify... Any alphanumeric character to a - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 292
box The Username text box in the Specify Logon Information dialog box The Domain text box in the Specify Logon Information dialog box The Windows Colors radio buttons in the Select Window Options dialog box The Compress Data Stream check box in the Compression, Cache, Encryption and Sound dialog box - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 293
in the Compression, Cache, Encryption and Sound dialog box The TCP/IP/Modem/ Serial radio buttons in the TE Client Connection Wizard - Host Information dialog box The Connection Name text box in the TE Client Connection Wizard Connection Information dialog box The Emulation scroll list in the TE - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 294
-HC 11 = not applicable Any integer from 1 to 65535 To Modify... The VT Terminal ID scroll list in the TE Client Connection Wizard Connection Information dialog box The IBM 3270 Model scroll list in the TE Client Connection Wizard Connection Information dialog box The IBM 5250 Model scroll list in - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 295
Name text box in the Connection Information dialog box The Printer Port scroll list in the TE Client Connection Wizard Printer Port Settings dialog box The FormFeed Terminator check box in the TE Client Connection Wizard - Printer Port Settings dialog box The Auto Line Feed check box in the TE - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 296
a text string using a maximum of 20 characters To Modify... The Password text box in the Add User Account and Modify User Account dialog boxes The Administrator/User/ Guest radio buttons in the Add User Account and Modify User Account dialog boxes The first connection listed in the Connection Name - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 297
dialog boxes The eighth connection listed in the Connection Name list in the Add User Account and Modify User Account dialog boxes The first entry listed in the AutoStart list in the Add User Account and Modify User Account dialog boxes The second entry listed in the AutoStart list in the Add - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 298
Account dialog boxes The eighth entry listed in the AutoStart list in the Add User Account and Modify User Account dialog boxes The Enable Password Change check box in the Add User Account and Modify User Account dialog box. Note This chart may not list all of the read-write objects in the MIB. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 299
(see "ICA Client Settings") • Browser based access, in which an NFuse server provides ICA links within a Web page to allow ICA sessions to be launched from within a browser window (see "Internet Explorer Connections"). Both facilities rely on the Citrix NFuse capability set. Before the terminal can - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 300
to display a pop-up browser window. The Internet Explorer version on the terminal does not support this capability and the browser simply displays a blank page with a small red X in the upper left corner. There are several ways to avoid this problem: • Instruct users to reference the explicit URL - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 301
list of commonly used terms in this guide. Definition One of several adaptations of the that supports data transfer rates up to 100 Mbps (100 megabits per second). 100Base-T is based on display you see on the monitor you use with your terminal. Clear to Send. Control signal sent from the DCE - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 302
306 DHCP Glossary DNS Download DSR DTE DTR Ethernet FCC Firmware The Dynamic Host Configuration Protocol (DHCP) provides configuration parameters to Internet hosts. DHCP consists of two components: a protocol for delivering host-specific configuration parameters from a DHCP server to a host and a - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 303
, acting as a client, downloads files from a remote server. FTP is a core component in TCP/IP system administration and is implemented at the Applications layer with respect to the OSI protocol model. Its operation is based on the Telnet program and TCP. Graphical User Interface (pronounced "gooey - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 304
referred to as 1 million bits. Megabytes Megabits per second. The world's first Server-based Computing software for Microsoft Windows NT 4.0 Server, Terminal Server Edition multi-user software. Management Information Base. A database of managed objects accessed by network management protocols. - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 305
back to digital bits. Desktop client that works with existing standard at both ends (again, according to the specification). On Screen Display. A menu that displays password pair to the server. If authentication succeeds the server sends back an acknowledgment; otherwise it either terminates - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 306
The service includes support for dialup and logon, and then presents the same network interface as the normal network drivers (albeit slightly slower). Remote Desktop Protocol. A presentation service protocol that governs input and output between a WBT and WTS (Windows Terminal Server). It is based - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 307
are often used on personal computers. Note Not all terminals have a serial port. A computer, or a software package, that provides a specific kind of service (such as access to workstations, printers, and other parts of the network) to client software running on other computers. The term can refer to - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 308
because they access applications from a central server or network. Thin clients can operate in a Server-based Computing environment. Timeout A time interval within which certain operations must occur; for example, the time allotment for the terminal to connect to a login host. After the timeout - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 309
. Trademarked logo for Windows-based Terminals manufactured by Wyse Technology Inc. Windows Terminal Server. A server application that transmits Windows user interface data via a network to a WBT. Transmitter On/Transmitter Off. Control characters used for flow control, instructing serial devices to - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 310
Finish xxvii, 36, 41 ICA Client Settings 52, 57 Modify User 231, 234, 243 Next xxvii OK xxvii Restart (terminal) 42 Security 94 Shutdown (terminal) 249 SNMP Network 53 Index 315 SNMP Network Administration 213 Startup (connection) 69 TCP/IP Settings 93 Upgrade 210, 223 X xxvii Connection protocols - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 311
Modify User Account 243 Window Options 77 Server Location 73 SNMP Network Administration 213 SNTP Client Firmware download cable method 201 parallel download 201 Function Dial-Up Client 81 Internet Explorer 125 Microsoft Remote Desktop Client 101 Terminal Options 91 Call Setup 92 Client Name 59 Close - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 312
RDP Option IDs 221 Rename Group 61 Reset Hot Key Enable 231 Reset the Terminal to Factory-Default Property Settings 17 Reset To Defaults 221 Respond With 113 Secondary DNS 154 Secondary WINS 154 Security Enable 229 Server Group 61 Service Profile ID 1 164 Service Profile ID 2 164 Set (field) 215 Set - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 313
Use the IP Information Supplied by DHCP 19 H Headphone jack 3360SE 5, 11 How to Adjust your mouse 265 Check your terminal's revision of software 265 Configure a local printer 268 Determine the terminal's memory size 267 Make a basic PPP connection 266 Reset your terminal 267 Switch between multiple - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 314
274 Power connector , 140 Cursor 169 Default Hotkeys 56 Devices 39 Upgrade 39, 207, 210 Web 39 R RDP 219 RDP encryption 51 Reset, hot key 17, 231 T Terminal accounts Administrator 234, 240, 247-248 Guest 233, 241, 247 User 234, 241, 247 V Video connector 3360SE 5, 11 W WBT xxv Windows-based terminals - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 315
T1000/T1010 Series Windows®-based Terminal Administrators Guide Software Version 3.5 Written and published by: Compaq Computer Corporation, February 2001 Created using FrameMaker®, Acrobat®, and Magellan™ - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 316
T1000 Terminal Back Panel Connectors 4 1-2 T1000 Freestanding Desktop Mounting 7 1-3 T1000 Power Button 8 2-1 T1010 Terminal Back Panel Connectors 10 2-2 T1010 Freestanding Desktop Mounting 13 2-3 T1010 Power 29 3-11 Local Printer Setup Dialog Box 30 3-12 76 10-9 Select Window Options Dialog Box 76 - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 317
Serial Cable on Com1 (or Com2) Dialog Box 122 18-1 Internet Explorer Setup Dialog Box 126 19-1 Edit Connection Details Dialog Box 127 19-2 Application Properties Sheet 130 19-3 Logon Properties Sheet 131 19-4 Window Properties Sheet 132 19-5 Options Properties Sheet 134 19-6 Title Properties Sheet - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 318
Parallel Download Cable Connectors 205 35-1 Upgrade Properties Sheet 208 35-2 Firmware Upgrade Dialog Box 1 211 35-3 Firmware Upgrade Dialog Box 2 211 36-1 SNMP Network Administration Dialog Box 214 37-1 Change DHCP Option IDs Dialog Box 220 38-1 Security Properties Sheet 228 40-1 Add User Account - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 319
xxvi 2 User Interface Menu Control xxvii 1-1 T1000 Terminal Back Panel Connectors 5 2-1 T1010 Terminal Back Panel Connectors 11 3-1 Desktop and Keyboard Settings Dialog Box 23 5-1 Network Properties Sheet 45 6-1 Web Properties Sheet 49 7-1 Apps Properties Sheet 52 8-1 Default Hotkeys Properties - Compaq T1010 | T1000/T1010 Series Windows-based Terminal Administrator's Guide - Page 320
Network Administration Dialog Box 215 37-1 Change DHCP Option IDs Dialog Box 221 38-1 Security Properties Sheet 229 40-1 Add User Account Dialog Box 239 41-1 Modify User Account Dialog Box 245 44-1 Winterm Model T1000 Terminal Specifications 258 44-2 Winterm Model T1010 Terminal Specifications 262
T1000/T1010 Series Windows
®
-based Terminal
Administrators Guide
Software Version 3.5