Home > Compaq Manuals > Desktops > Compaq dc7900 > Manual Viewer

Compaq dc7900 Troubleshooting Guide - Page 62

Compaq dc7900 - Convertible Minitower PC Manual

Page 62 highlights

Table A-1 Numeric Codes and Text Messages (continued) Control panel message Description Recommended action cord, restore the original memory configuration, and reboot the computer. 4. 2204-Inventory error during MEBx execution BIOS information passed to the MEBx resulted in a failure. 1. 2. If the error persists, replace the system board. Reboot the computer. If the error persists, update to the latest BIOS version. If the error still persists, replace the system board. Reboot the computer. If the error persists, update to the latest BIOS version. If the error still persists, replace the system board. 3. 2205-Interface error during MEBx execution MEBx operation experienced a hardware error during communication with ME. 1. 2. 3. 2211-Memory not configured correctly for proper MEBx execution. Invalid Electronic Serial Number Network Server Mode Active and No Keyboard Attached DIMM1 is not installed. Make sure there is a memory module in the black DIMM1 socket and that it is properly seated. Enter the correct serial number in Computer Setup. 1. Reconnect keyboard with computer turned off. Check connector for bent or missing pins. Ensure that none of the keys are depressed. Replace keyboard. Electronic serial number is missing. Keyboard failure while Network Server Mode enabled. 2. 3. 4. Parity Check 2 Parity RAM failure. Run Computer Setup and Diagnostic utilities. 56 Appendix A POST Error Messages ENWW




Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Compaq dc7900 - Convertible Minitower PC Manual