Compaq nc6400 External Devices - Windows Vista
Compaq nc6400 - Notebook PC Manual
View all Compaq nc6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq nc6400 manual content summary:
- Compaq nc6400 | External Devices - Windows Vista - Page 1
External Devices User Guide - Compaq nc6400 | External Devices - Windows Vista - Page 2
© Copyright 2007 Hewlett-Packard Development Company, L.P. Windows is a U.S. registered trademark of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements - Compaq nc6400 | External Devices - Windows Vista - Page 3
Table of contents 1 Using a USB device Connecting a USB device ...2 Stopping a USB device ...2 Required USB software ...2 USB legacy support ...3 2 Using the docking connector 3 Using the infrared port Index ...6 ENWW iii - Compaq nc6400 | External Devices - Windows Vista - Page 4
iv ENWW - Compaq nc6400 | External Devices - Windows Vista - Page 5
Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub, to the computer or to an optional expansion product. A hub provides additional USB ports for the system and can be connected - Compaq nc6400 | External Devices - Windows Vista - Page 6
stop the device before you remove it. 3. Click Stop, and then click OK. Required USB software Some USB devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the user guide for the device. 2 Chapter - Compaq nc6400 | External Devices - Windows Vista - Page 7
keys to enable or disable USB legacy support, and then press f10. 4. To save your preferences and exit Computer Setup, use the arrow keys to select File > Save changes and exit. Then follow the instructions on the screen. Your preferences go into effect when the computer restarts. ENWW USB legacy - Compaq nc6400 | External Devices - Windows Vista - Page 8
2 Using the docking connector The docking connector allows you to connect the computer to an optional docking device. An optional docking device provides additional ports and connectors that can be used with the computer. 4 Chapter 2 Using the docking connector ENWW - Compaq nc6400 | External Devices - Windows Vista - Page 9
port The computer is IrDA compliant-4 megabits per second (Mbps) standard-and can communicate with another infrared-equipped device that is also IrDA compliant. The infrared port supports both low-speed connections of up to 115 kilobits per second (Kbps) and highspeed connections of up to 4 Mbps - Compaq nc6400 | External Devices - Windows Vista - Page 10
Index C cables USB 2 D docking connector 4 H hubs 1 I infrared 5 P ports infrared 5 USB 1 S software USB devices 2 U USB cable, connecting 2 USB devices connecting 2 description 1 required software 2 stopping 2 USB hubs 1 USB legacy support 3 USB ports, identifying 1 USB software 2 6 Index ENWW - Compaq nc6400 | External Devices - Windows Vista - Page 11
External Devices
User Guide