Compaq nc6400 Memory Modules

Compaq nc6400 - Notebook PC Manual

Get Compaq nc6400 - Notebook PC PDF manuals and user guides View all Compaq nc6400 manuals
Add to My Manuals
Save this manual to your list of manuals

Compaq nc6400 manual content summary:

  • Compaq nc6400 | Memory Modules - Page 1
    Memory Modules User Guide
  • Compaq nc6400 | Memory Modules - Page 2
    in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: May 2006 Document Part Number: 406746-001
  • Compaq nc6400 | Memory Modules - Page 3
    Table of contents 1 Adding or replacing memory modules Adding a memory module to the expansion memory module slot 2 Upgrading a memory module in the primary memory module slot 6 2 Effects of increasing memory Index ...13 ENWW iii
  • Compaq nc6400 | Memory Modules - Page 4
    iv ENWW
  • Compaq nc6400 | Memory Modules - Page 5
    memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION
  • Compaq nc6400 | Memory Modules - Page 6
    3. Disconnect all external devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the memory module compartment cover screw (1). 8. Lift the memory module compartment cover
  • Compaq nc6400 | Memory Modules - Page 7
    b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. (To protect a memory module after removal, place it in an electrostatic-safe container.) 10. To insert a memory module: CAUTION To prevent damage to the memory module, be sure that you do not bend
  • Compaq nc6400 | Memory Modules - Page 8
    edges of the memory module, until the retention clips snap into place. 11. Align the tabs (1) on the memory module compartment cover with the notches on the computer. 12. Close the cover (2). 13. Tighten the memory module compartment cover screw (3). 14. Replace the battery. 4 Chapter 1 Adding or
  • Compaq nc6400 | Memory Modules - Page 9
    15. Reconnect external power and external devices. 16. Turn on the computer. ENWW Adding a memory module to the expansion memory module slot 5
  • Compaq nc6400 | Memory Modules - Page 10
    devices connected to the computer. 4. Unplug the power cord from the AC outlet. 5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Remove the 3 keyboard screws. 8. Turn the computer over and open it. 6 Chapter 1 Adding or replacing memory modules
  • Compaq nc6400 | Memory Modules - Page 11
    tilt the keyboard over until it rests on the palm rest of the computer. 11. Remove the memory module from the memory module slot: a. Pull away the retention clips (1) on each side of the memory module . (The memory module tilts up.) ENWW Upgrading a memory module in the primary memory module slot
  • Compaq nc6400 | Memory Modules - Page 12
    b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. (To protect a memory module after removal, place it in an electrostatic-safe container.) 12. To insert a memory module: CAUTION To prevent damage to the memory module, be sure that you do not bend
  • Compaq nc6400 | Memory Modules - Page 13
    c. Press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. 13. Return the keyboard to its previous position. ENWW Upgrading a memory module in the primary memory module slot 9
  • Compaq nc6400 | Memory Modules - Page 14
    the 4 keyboard release latches to lock the keyboard. 15. Turn the computer upside down on a flat surface. 16. Replace the keyboard screws. 17. Replace the battery. 18. Reconnect external power and external devices. 19. Turn on the computer. 10 Chapter 1 Adding or replacing memory modules ENWW
  • Compaq nc6400 | Memory Modules - Page 15
    you experience problems with hibernation after increasing memory, verify that the hard drive has enough free space to accommodate a larger hibernation file. To display the amount of space required by the hibernation file: ▲ Select Start > Control Panel > Performance and Maintenance > Power Options
  • Compaq nc6400 | Memory Modules - Page 16
    12 Chapter 2 Effects of increasing memory ENWW
  • Compaq nc6400 | Memory Modules - Page 17
    Index H hard drive, displaying free space 11 hibernation file 11 K keyboard screws removing 6 replacing 10 M memory displaying free space 11 increasing 11 replacing memory modules 2, 6 memory module inserting 8 removing 2, 7 replacing 2, 6 upgrading primary 6 memory module compartment cover removing
  • Compaq nc6400 | Memory Modules - Page 18
    14 Index ENWW
  • Compaq nc6400 | Memory Modules - Page 19
  • Compaq nc6400 | Memory Modules - Page 20
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
Memory Modules
User Guide