Compaq nc6400 Memory Modules - Windows Vista

Compaq nc6400 - Notebook PC Manual

Get Compaq nc6400 - Notebook PC PDF manuals and user guides View all Compaq nc6400 manuals
Add to My Manuals
Save this manual to your list of manuals

Compaq nc6400 manual content summary:

  • Compaq nc6400 | Memory Modules - Windows Vista - Page 1
    Memory Modules User Guide
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 2
    in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: January 2007 Document Part Number: 430283-001
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 3
    Table of contents Adding or replacing memory modules Adding a memory module to the expansion memory module slot 2 Upgrading a memory module in the primary memory module slot 6 Index ...12 ENWW iii
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 4
    iv ENWW
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 5
    memory module to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 6
    4. Disconnect all external devices connected to the computer. 5. Unplug the power cord from the AC outlet. 6. Turn the computer upside down on a flat surface. 7. Remove the battery from the computer. 8. Loosen the memory module compartment cover screw (1). 9. Lift the memory module compartment cover
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 7
    b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. (To protect a memory module after removal, place it in an electrostatic-safe container.) 11. To insert a memory module: CAUTION To prevent damage to the memory module, be sure that you do not bend
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 8
    of the memory module, until the retention clips snap into place. 12. Align the tabs (1) on the memory module compartment cover with the notches on the computer. 13. Close the cover (2). 14. Tighten the memory module compartment cover screw (3). 15. Replace the battery. 4 Adding or replacing memory
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 9
    16. Reconnect external power and external devices. 17. Turn on the computer. If the computer displays a message indicating that the size or configuration of the memory has changed, press f1 to save the changes. ENWW Adding a memory module to the expansion memory module slot 5
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 10
    external devices connected to the computer. 5. Unplug the power cord from the AC outlet. 6. Turn the computer upside down on a flat surface. 7. Remove the battery from the computer. 8. Remove the 3 keyboard screws. 9. Turn the computer over and open it. 6 Adding or replacing memory modules ENWW
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 11
    tilt the keyboard over until it rests on the palm rest of the computer. 12. Remove the memory module from the memory module slot: a. Pull away the retention clips (1) on each side of the memory module. (The memory module tilts up.) ENWW Upgrading a memory module in the primary memory module slot
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 12
    b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. (To protect a memory module after removal, place it in an electrostatic-safe container.) 13. To insert a memory module: CAUTION To prevent damage to the memory module, be sure that you do not bend
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 13
    c. Press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. 14. Return the keyboard to its previous position. ENWW Upgrading a memory module in the primary memory module slot 9
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 14
    15. Slide the 4 keyboard release latches to lock the keyboard. 16. Turn the computer upside down on a flat surface. 17. Replace the keyboard screws. 18. Replace the battery. 19. Reconnect external power and external devices. 20. Turn on the computer. 10 Adding or replacing memory modules ENWW
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 15
    If the computer displays a message indicating that the size or configuration of the memory has changed, press f1 to save the changes. ENWW Upgrading a memory module in the primary memory module slot 11
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 16
    Index K keyboard screws removing 6 replacing 10 M memory replacing memory modules 2, 6 memory module inserting 8 removing 2, 7 replacing 2, 6 upgrading primary 6 memory module compartment cover removing 2 replacing 4 12 Index ENWW
  • Compaq nc6400 | Memory Modules - Windows Vista - Page 17
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
Memory Modules
User Guide