Compaq nc6400 ProtectTools (Select Models Only) - Windows Vista
Compaq nc6400 - Notebook PC Manual
View all Compaq nc6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq nc6400 manual content summary:
- Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 1
HP ProtectTools Getting Started - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 2
by its proprietor and used by Hewlett-Packard Company under license. Java is a US trademark of Sun Microsystems, Inc. SD Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 3
10 Setting and changing the smart card user password 11 Storing the administrator or user card password 12 General tasks ...13 Updating BIOS smart card settings 13 Selecting the smart card reader 13 Changing the smart card PIN 13 Backing up and restoring smart cards 14 Creating a recovery - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 4
HP ProtectTools settings 38 Enabling and disabling smart card or Java Card power-on authentication support ...38 Enabling and disabling power-on authentication support for Embedded Security ...39 Enabling and disabling Automatic DriveLock hard drive protection 40 Managing Computer Setup passwords - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 5
...49 Changing the Windows logon password 49 Changing a token user verification before Single Sign On 62 7 Device Access Manager for HP ProtectTools Starting background service ...64 Simple configuration ...65 Device class configuration (advanced 66 Adding a user or a group 66 Removing a user - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 6
Denying access to a user or group 66 Allowing access to a device class for one user of a group 66 Allowing access to a specific device for one user of a group 67 Glossary ...68 Index ...70 vi ENWW - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 7
requires an optional smart card and reader. HP ProtectTools software modules may be preinstalled, preloaded, or available for download from the HP Web site. Visit http://www.hp.com for more information. NOTE The instructions in this guide are written with the assumption that you have already - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 8
ProtectTools by logging on to Credential Manager directly from the Windows logon screen. For more information, refer to "Logging on to Windows with Credential Manager," in Chapter 6 "Credential Manager for HP ProtectTools." Understanding security roles In managing computer security (particularly for - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 9
or restored from hibernation. It also allows for creating recovery files to restore user or administrator cards. Smart card user password Smart Card Security NOTE Also known as BIOS user card password Used for smart card power-on (BIOS) authentication. Allows access to the computer contents when - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 10
for the embedded security chip. Owner password Credential Manager logon password Embedded Security, by IT administrator Credential Manager Credential Manager recovery file Credential Manager, by IT password administrator Windows logon password Windows Control Panel Protects the system and - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 11
Creating a secure password When creating passwords, you must first follow any specifications that are set by the program. In general, however, consider the following guidelines to help you create strong passwords and reduce the chances of your password being compromised: ● Use passwords with more - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 12
a user to insert the smart card and optionally enter a PIN prior to allowing the operating system to load. ● Set and change the password used to authenticate users of the smart card. ● Back up and restore smart card BIOS passwords stored on the smart card. 6 Chapter 2 Smart Card Security for HP - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 13
: 1. Insert the smart card into the reader. 2. Select Start > All Programs > HP ProtectTools Security Manager. 3. In the left pane, click Smart Card Security, and then click correctly within 5 attempts. The count for these attempts resets after the correct PIN is entered. 7. Click OK to complete the initialization - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 14
power-on authentication support. 2. Enable smart card BIOS security mode in Smart Card Security. Refer to "Enabling smart card BIOS security mode and setting the smart card administrator password and user smart cards. ● Create a recovery file to restore either a user or administrator smart card - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 15
. Refer to "Storing the administrator or user card password" for detailed instructions. ● Creating a recovery file. Refer to "Creating a recovery file" for detailed instructions. Disabling smart card BIOS security mode When disabling smart card BIOS security mode, the smart card administrator and - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 16
Changing the smart card administrator password The smart card administrator password is set as part of the process for enabling smart card BIOS security mode. You can change the smart card administrator password after it has been set. Refer to "Smart card BIOS security mode," earlier in this chapter - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 17
user password on the card, the BIOS Password Wizard opens. 6. In the BIOS Password Wizard, you can either ● Enter a password manually. ● Generate a random 32-byte password. NOTE Using a known password enables you to create duplicate cards without using a recovery file. Generating a random password - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 18
4. In the right pane, under BIOS Password on Smart Card, click Store. 5. In the BIOS Password Wizard, you can either ● Enter a password manually. ● Generate a random 32-byte password. NOTE Using a known password enables you to create duplicate cards without using a recovery file. Generating a random - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 19
card PIN when you restart the computer: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Smart Card Security, and then click BIOS. 3. In the right pane, under Smart Card BIOS Password Properties, click Settings. 4. select the check box to require a PIN at - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 20
, do not save the recovery file on the computer hard drive; you will not be able to access the file without the smart card. Also, a recovery file saved on the hard drive may be accessible to others, posing a security risk. 6. Set and confirm a recovery file password, and then click OK. CAUTION - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 21
will need the following: ● Access to a computer with Smart Card Security software installed ● Smart card recovery file ● Smart card recovery file password ● Smart card To restore a smart card: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Smart Card - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 22
," earlier in this chapter. To create a replacement smart card with a manually generated smart card password: 1. Initialize a new smart card. For instructions, refer to "Initializing the smart card," earlier in this chapter. 2. Store the administrator or user card password on the new smart card. For - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 23
3 Java Card Security for HP ProtectTools Java Card Security for HP ProtectTools manages the Java Card setup to enable Java Card authentication in a power-on environment, and to configure separate Java Cards for an administrator and a user. This requires a user to insert the Java Card and enter - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 24
Java Card PIN To change a Java Card PIN: NOTE The Java Card PIN must be between 4 and 8 numeric characters. 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Java Card Security, and then click General. 3. Insert a Java Card (with an existing PIN) into the - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 25
a Java Card ● Set power-on authentication ● Back up and restore Java Cards NOTE You must have a Computer Setup setup password in order to get to power-on authentication. To assign a Java Card PIN: NOTE The Java Card PIN must be between 4 and 8 numeric characters. 1. Select Start > All Programs > HP - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 26
to "Enabling and disabling smart card or Java Card power-on authentication support," in Chapter 5, "BIOS Configuration for HP ProtectTools." 2. Enable Java Card power-on authentication in Java Card Security. Refer to "Enabling Java Card power-on authentication and creating an administrator Java Card - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 27
computer. b. If applicable, enter your DriveLock user password in the DriveLock password box, and then enter it again in the Confirm password box. c. Enter the Java Card PIN. d. Click OK. 7. When you are prompted to create a recovery file, refer to "Creating a recovery file," or you can click Cancel - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 28
NOTE Power-on authentication and an administrator card must be set up in order to create a user Java Card. To create a user Java Card: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Java Card Security, and then click Advanced. 3. When the Setup Password - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 29
to access the file without the Java Card. Also, a recovery file saved on the hard drive may be accessible to others, posing a security risk. 6. Enter a recovery file password in the Recovery file password box, and then enter it again in the Confirm password box. 7. Enter the Java Card PIN, and then - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 30
software installed ● Java Card recovery file ● Java Card recovery file password ● Java Card To restore a Java Card: 1. Select Start > All Programs > HP purposes. To create a replacement Java Card: ▲ Insert a Java Card into the reader, and then load the appropriate recovery file onto it. For more - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 31
secure drive (PSD) for protecting user data ● Data management functions, such as backing up and restoring the key hierarchy ● Support for third-party applications (such as Microsoft® Outlook and Internet Explorer) for protected digital certificate operations when using the Embedded Security software - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 32
of the computer and gaining control over the owner tasks, such as handling the emergency recovery archive, and configuring user access settings. Follow the steps in the following Save Changes and Exit. Then follow the on-screen instructions. 26 Chapter 4 Embedded Security for HP ProtectTools ENWW - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 33
will ● Set an owner password for the embedded security chip that protects access to all owner functions on the embedded security chip. ● Set up the emergency recovery archive, which is a protected storage area that allows reencryption of the Basic User Keys for all users. To initialize the embedded - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 34
User Key password to protect the Basic User Key. ● Sets up a personal secure drive (PSD) for storing encrypted files and folders. CAUTION Safeguard the Basic User Key password authority. For instructions on configuring your and then click Next. 10. Select the drive letter and label for the - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 35
Drive After setting up the PSD, you are prompted to enter the Basic User Key password at the next logon. If the Basic User Key password is entered correctly, you can access the PSD directly from Windows keys, you will be able to use a recovery agent to decrypt your information. To encrypt files and - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 36
Changing the Basic User Key password To change the Basic User Key password: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Embedded Security, and then click User Settings. 3. In the right pane, under Basic User Key password, click Change. 4. Type the - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 37
file: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, . 5. Select whether to add the emergency recovery archive to the backup information. 6. Click screen instructions to complete the initialization. For more information, refer to "Setting up the basic user - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 38
click Advanced. 3. In the right pane, under Owner Password, click Change. 4. Type the old owner password, and then set and confirm the new owner password. 5. Click OK. Resetting a user password An administrator can help a user to reset a forgotten password. For more information, refer to the online - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 39
Migrating keys with the Migration Wizard Migration is an advanced administrator task that allows the management, restoration, and transfer of keys and certificates. For details on migration, refer to the Embedded Security online Help. ENWW Advanced tasks 33 - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 40
. With BIOS Configuration, you can ● Manage power-on passwords and administrator passwords. ● Configure other power-on authentication features, such as enabling smart card passwords and embedded security authentication support. ● Enable and disable hardware features, such as CD-ROM boot or different - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 41
you turn on or restart the computer. To manage boot options: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click BIOS Configuration. 3. Enter your Computer Setup administrator password at the BIOS administrator password prompt, and then click OK. NOTE The - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 42
Boot Popup Delay (Sec) ● CD-ROM Boot ● Floppy Boot ● Internal Network Adapter Boot ● Internal Network Adapter Boot Mode (PXE or RPL) ● Boot Order ● Device Configurations ● NumLock at Boot ● Swapping fn/Ctrl Keys ● Multiple Pointing Devices ● USB Legacy Support 36 Chapter 5 BIOS Configuration for HP - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 43
AC Power ● BIOS DMA Data Transfers ● Intel or AMD PSAE Execution Disable ● Built-In Device Options ● Embedded WLAN Device Radio ● Embedded WWAN Device Radio ● Embedded Bluetooth® Device Radio ● LAN/WLAN Switching ● Wake on LAN from Off 5. Click Apply, and then click OK in the HP ProtectTools window - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 44
module. To enable smart card power-on authentication support: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click BIOS Configuration. 3. Enter your Computer Setup administrator password at the BIOS administrator password prompt, and then click OK - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 45
module. To enable power-on authentication support for embedded security: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click BIOS Configuration. 3. Enter your Computer Setup administrator password at the BIOS administrator password prompt, and then - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 46
" page in BIOS Configuration are saved immediately upon clicking the Apply or OK button in the HP ProtectTools window. Make sure you remember what password you have set, because you will not be able to undo a password setting without supplying the previous password. The power-on password can protect - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 47
be prompted for the password before opening the BIOS Configuration portion of HP ProtectTools. NOTE After you have set a setup password, the Set button on the "Passwords" page is replaced by a Change button. Setting the power-on password To set the power-on password: 1. Select Start > All Programs - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 48
to enhance security by requiring users to enter a power-on, TPM, or smart card password when Windows restarts. To enable or disable power-on authentication on Windows restart: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click BIOS Configuration, and then - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 49
3. In the right pane, under Password Options, enable or disable Require password on restart. 4. Click Apply, and then click OK in the HP ProtectTools window to save your changes. ENWW Advanced tasks 43 - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 50
6 Credential Manager for HP ProtectTools Credential Manager for HP ProtectTools has security features that provide protection against unauthorized access to your computer. These features include the following: ● Alternatives to passwords when logging on to Windows, such as using a smart card or - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 51
-clicking the HP ProtectTools Security Manager icon ● From the "Credential Manager" page of ProtectTools Security Manager, by clicking the Log On link in the upper-right corner of the window 2. Click Next. 3. Type your user name in the User name box. 4. Enter a password in the Password box, and - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 52
in the notification area. The HP ProtectTools Security Manager window opens. 2. In the left pane, click Credential Manager, and then click Log On in the upper-right corner of the right pane. The Credential Manager Logon Wizard opens. 3. Type your Windows password in the Password box, and then click - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 53
fingerprint reader for a different Windows user, log on to Windows as that user and then repeat steps 1 through 6. Using your registered fingerprint to log on to Windows 1. Immediately after you have registered your fingerprints, restart Windows. 2. At the Windows Welcome screen, swipe any of your - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 54
click Next. 6. Follow the on-screen instructions to complete the registration. Registering a USB eToken 1. Be sure that the USB eToken drivers are installed. NOTE Refer to the USB eToken user guide for more information. 2. Select Start > All Programs > HP ProtectTools Security Manager. 3. In the - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 55
either on the computer hard drive or in the Windows registry. When you log on with a virtual token, you are asked for a user PIN to complete the a master PIN and a user PIN. 8. Click Finish. Changing the Windows logon password 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 56
Type" page, select the device type you want to use to store the backup, and then click Next. NOTE You will need to know the password or PIN for the device you select for the backup file. 6. Follow the on-screen instructions, and then click Finish. 50 Chapter 6 Credential Manager for - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 57
need to know the password or PIN for the device you select for the backup file. 5. Follow the on-screen instructions, and then click Finish. 6. Click Yes in the confirmation dialog box. Clearing an identity from the system NOTE This does not affect your Windows user account. 1. Select Start > All - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 58
your fingerprint to log on to Windows, click the keyboard icon in the upper-left corner of the screen next to the fingerprint icon. The Credential Manager Logon Wizard opens. 3. Click the User name arrow and click your name. 4. Type your password in the Password box and click Next. 5. Select More - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 59
Click the account you want to remove, and then click Remove. 5. In the confirmation dialog box, click Yes. 6. Click OK. Using Single Sign On Credential Manager has a Single Sign On feature that stores user names and passwords for multiple Internet and Windows programs, and automatically enters logon - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 60
user before submitting credentials. ● Show SSO shortcut for this application. 5. Click Yes to complete the registration. Using manual (drag and drop) registration 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Credential Manager, and then click Services - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 61
Manager, and then click Services and Applications. 3. In the right pane, under Single Sign On, click Manage Applications and Credentials. 4. Click the application entry you want to export. Then click More > Applications > Export Script. 5. Follow the on-screen instructions to complete the export - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 62
any of the following options: ● Applications ● Add New ● Remove ● Properties ● Import Script ● Export Script ● Credentials ● Create New ● View Password NOTE You must authenticate your identity before viewing the password. 6. Follow the on-screen instructions. 7. Click OK to save changes. 56 Chapter - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 63
Properties dialog box. 10. Click OK. Removing protection from an application To remove restrictions from an application: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Credential Manager, and then click Services and Applications. ENWW General - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 64
Service dialog box opens. 4. Select a category of user whose remove, and then click Remove. 6. Click OK. Changing restriction settings for a protected application 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Credential Manager, and then click Services - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 65
Credentials" page, you can specify which type or combination of credentials are required of either users or administrators. To specify how users or administrators log on: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Credential Manager, and then click - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 66
instructions. ● To delete the credential, click Clear, and then click Yes in the confirmation dialog box. ● To modify the credential properties, click Properties, and then follow the on-screen instructions. 5. Click Apply, and then click OK. 60 Chapter 6 Credential Manager for HP ProtectTools - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 67
Sign On works for the current user, such as how it handles detection of logon screens, automatic logon to registered logon dialogs, and password display. ● Services and Applications-Allows you to view the available services and modify the settings for those services. ● Security-Allows you to select - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 68
Example 2-Using the "Advanced Settings" page to require user verification before Single Sign On 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Credential Manager, and then click Settings. 3. In the right pane, click the Single Sign On tab. 4. Under - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 69
to administrators only. Device Access Manager for HP ProtectTools has security features that provide protection against unauthorized access to devices attached to your computer system. These features include the following: ● Device profiles are created for each user to define device access ● Device - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 70
you first attempt to apply device profiles, HP ProtectTools Security Manager opens a dialog box to ask if you would you like to start the background service. Click Yes to start the background service and set it to start automatically whenever the system boots. 64 Chapter 7 Device Access Manager for - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 71
to deny access to the following classes of devices: ● USB devices for all non-administrators ● All removable media (floppy disks, pen drives, etc.) for all non-administrators ● All DVD/CD-ROM drives for all non-administrators ● All serial and parallel ports for all non-administrators To deny access - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 72
dialog box opens. 5. Select Advanced > Find Now to search for users or groups to add. 6. Click a user to be denied access, and then click OK. 7. Click OK. Removing a user or a group 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Device Access Manager - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 73
to the specific device to be allowed for the user in the device list. 7. Click Add. The Select Users or Groups dialog box opens. 8. Select Advanced > Find Now to search for users or groups to add. 9. Click a user to be allowed access, and then click OK. 10. Click Allow to grant this user access. 11 - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 74
Security feature that links the hard drive to a user and requires the user to correctly enter the DriveLock password when the computer starts up. Emergency recovery archive Protected storage area that allows the re-encryption of basic user keys from one platform owner key to another. Encryption - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 75
, it is used to authenticate the owner to a computer. Virtual token Security feature that works very much like a smart card and reader. The token is saved either on the computer hard drive or in the Windows registry. When you log on with a virtual token, you are asked for a user PIN to complete the - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 76
changing 10 definition 3 BIOS administrator password 3 BIOS Configuration for HP ProtectTools Automatic DriveLock 40 boot options 35 HP ProtectTools settings, managing 38 Java Card power-on authentication 38 password options, setting 42 power-on authentication 39 power-on authentication on Windows - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 77
folders 29 initializing chip 27 migrating keys 33 owner password, changing 32 password 3 permanently disabling 32 Personal Secure Drive 29 resetting user password 32 setup procedures 26 emergency recovery 27 emergency recovery token password definition 4 setting 27 enabling Automatic DriveLock 40 - Compaq nc6400 | ProtectTools (Select Models Only) - Windows Vista - Page 78
27 recovery file 14 resetting user 32 secure, creating 5 setting options 42 setting power-on 41 setting setup 41 smart card administrator 9 smart card administrator, changing 10 smart card user, setting and changing 11 storing administrator or user card 12 Windows logon 49 personal secure drive (PSD
HP ProtectTools
Getting Started