Compaq nx6115 Computer Setup
Compaq nx6115 - Notebook PC Manual
 |
View all Compaq nx6115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq nx6115 manual content summary:
- Compaq nx6115 | Computer Setup - Page 1
Computer Setup Document Part Number: 383705-001 May 2005 - Compaq nx6115 | Computer Setup - Page 2
Contents Computer Setup Computer Setup Access 1 Computer Setup Defaults 2 File Menu 3 Security Menu 4 Tools Menu 5 Advanced Menu 5 Index Computer Setup ii - Compaq nx6115 | Computer Setup - Page 3
you exit Computer Setup. ✎ Pointing devices are not supported in Computer Setup. You must use the keyboard to navigate and make selections. ✎ An external keyboard connected by USB can be used with Computer Setup only if USB legacy support is enabled. The menu tables later in this guide provide an - Compaq nx6115 | Computer Setup - Page 4
File, Security, Tools, or Advanced menu. 3. To exit Computer Setup, choose one of the following methods: ❏ To exit Computer Setup without saving your preferences, use the arrow keys to select File > Ignore Changes and Exit. Then follow the instructions on the screen. ❏ To save your preferences and - Compaq nx6115 | Computer Setup - Page 5
preferences and exit Computer Setup, use the arrow keys to select File > Save Changes and Exit. Then follow the instructions on the screen. Your preferences are in effect when the computer restarts. ✎ Your password- and security-related settings are not changed when you restore the factory default - Compaq nx6115 | Computer Setup - Page 6
, cache and memory size, video revision, keyboard controller version, and system ROM. Save system configuration settings to a diskette. Restore system configuration settings from a diskette. Replace the configuration settings in Computer Setup with factory default settings. (Password- and security - Compaq nx6115 | Computer Setup - Page 7
■ Enable/disable DriveLock on the computer hard drive(s). ■ Change a DriveLock user or master password. ✎ DriveLock settings are accessible only when you enter Computer Setup by turning on (not restarting) the computer. Enable/disable support for smart card power-on authentication. ✎ This feature is - Compaq nx6115 | Computer Setup - Page 8
To Do This Run a comprehensive self-test on any hard drive in the system. View battery status information. Run a comprehensive check on system memory. Advanced Menu Select Language (or press f2) Boot options To Do This Change the Computer Setup language. ■ Set f10 and f12 delay when starting up - Compaq nx6115 | Computer Setup - Page 9
select Disable.) ■ Enable/disable USB legacy support for a USB keyboard, mouse, and hub. ❐ A USB keyboard, mouse, and hub work even when a Windows operating system is not loaded. ❐ The computer starts from a boot hard drive, diskette drive diskette (select models only), or optical disc inserted into - Compaq nx6115 | Computer Setup - Page 10
B battery information 6 Bluetooth Device Radio 7 boot options 6 boot order 6 C Computer Setup accessing 2 Advanced menu 6 File menu 4 restoring defaults 3 Security menu 5 Tools menu 6 D drives, boot order 6 E Execution Disable 7 F File menu 4 H hard drive test 6 I Intel SpeedStep 7 L LAN Power Save - Compaq nx6115 | Computer Setup - Page 11
S Security menu 5 serial number, computer 4 Setup utility accessing 2 Advanced menu 6 File menu 4 restoring default settings 3 Security menu 5 Tools menu 6 SpeedStep Technology 7 system fan 7 system information 4 T Tools menu 6 U USB legacy support 7 W WLAN Device Radio 7 Index-2 Computer Setup - Compaq nx6115 | Computer Setup - Page 12
Windows are U.S. registered trademarks of Microsoft Corporation. Bluetooth services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Computer Setup First Edition May 2005 Document Part
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Computer Setup
Document Part Number: 383705-001
May 2005