Compaq nx6330 ProtectTools (Select Models Only) - Windows Vista
Compaq nx6330 - Notebook PC Manual
View all Compaq nx6330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq nx6330 manual content summary:
- Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 1
HP ProtectTools Getting Started - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 2
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: January 2007 Document Part Number: 419699-001 - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 3
the smart card administrator password ...9 Disabling smart card BIOS security mode 9 Changing the smart card administrator password 10 Setting and changing the smart card user password 11 Storing the administrator or user card password 12 General tasks ...13 Updating BIOS smart card settings 13 - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 4
tasks ...38 Managing HP ProtectTools settings 38 Enabling and disabling smart card or Java Card power-on authentication support ...38 Enabling and disabling power-on authentication support for Embedded Security ...39 Enabling and disabling Automatic DriveLock hard drive protection 40 Managing - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 5
the "Advanced Settings" page to allow Windows logon from Credential Manager 61 Example 2-Using the "Advanced Settings" page to require user verification before Single Sign On 62 7 Device Access Manager for HP ProtectTools Starting background service ...64 Simple configuration ...65 Device class - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 6
Denying access to a user or group 66 Allowing access to a device class for one user of a group 66 Allowing access to a specific device for one user of a group 67 Glossary ...68 Index ...70 vi ENWW - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 7
, and Smart Card Security for HP ProtectTools requires an optional smart card and reader. HP ProtectTools software modules may be preinstalled, preloaded, or available for download from the HP Web site. Visit http://www.hp.com for more information. NOTE The instructions in this guide are written - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 8
, visit http://www.hp.com. ● IT administrator-Applies and manages the security features defined by the security officer. Can also enable and disable some features. For example, if the security officer has decided to deploy smart cards, the IT administrator can enable smart card BIOS security mode - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 9
. It also allows for creating recovery files to restore user or administrator cards. Smart card user password Smart Card Security NOTE Also known as BIOS user card password Used for smart card power-on (BIOS) authentication. Allows access to the computer contents when the computer is turned - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 10
Set in this HP ProtectTools Function module Emergency Windows. ● It can be used in place of the Windows logon process, allowing access to Windows and Credential Manager simultaneously. Protects access to the Credential Manager recovery file. Can be used in manual logon or saved on the smart card - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 11
. ● Do not save the password in a file, such as an e-mail, on the computer. ● Do not share accounts or tell anyone your password. ENWW Managing HP ProtectTools passwords 5 - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 12
so that it can be used with other HP ProtectTools modules, such as Credential Manager for HP ProtectTools. ● Work with the Computer Setup utility to enable smart card authentication in a power-on environment, and to configure separate smart cards for an administrator and a user. This requires a user - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 13
using it. To initialize the smart card: 1. Insert the smart card into the reader. 2. Select Start > All Programs > HP ProtectTools Security Manager. 3. In the left pane, click Smart Card Security, and then click Smart Card. 4. In the right pane, click Initialize. 5. Type your name in the first box - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 14
mode involves the following steps: 1. Enable Smart Card Power-on Authentication Support in BIOS Configuration. Refer to "Enabling and disabling smart card or Java Card power-on authentication support," in Chapter 5, "BIOS Configuration for HP ProtectTools." NOTE Enabling this setting allows you to - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 15
. 3. In the right pane, under BIOS Security Mode, click Enable. 4. Click Next. 5. Enter the Computer Setup setup password at the prompt, and then click Next. 6. Insert the new administrator smart card, and follow the on-screen instructions. The instructions vary and may include the following tasks - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 16
BIOS. 3. In the right pane, under BIOS Security Mode, next to BIOS administrator card, click Change. 4. Enter the smart card PIN and click Next. 5. Insert the new administrator card and click Next. 6. Enter the smart card PIN and click Finish. 10 Chapter 2 Smart Card Security for HP ProtectTools - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 17
is already a user password on the card, the Finish dialog box is displayed. Omit steps 6 through 8 and go to step 9. ● If there is no user password on the card, the BIOS Password Wizard opens. 6. In the BIOS Password Wizard, you can either ● Enter a password manually. ● Generate a random 32-byte - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 18
Start > All Programs > HP ProtectTools Security Manager. 3. In the left pane, click Smart Card Security, and then click BIOS. 4. In the right pane, under BIOS Password on Smart Card, click Store. 5. In the BIOS Password Wizard, you can either ● Enter a password manually. ● Generate a random 32 - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 19
General tasks Updating BIOS smart card settings To require a smart card PIN when you restart the computer: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Smart Card Security, and then click BIOS. 3. In the right pane, under Smart Card BIOS Password - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 20
loss of access to the computer, do not save the recovery file on the computer hard drive; you will not be able to access the file without the smart card. Also, a recovery file saved on the hard drive may be accessible to others, posing a security risk. 6. Set and confirm a recovery file password - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 21
or other media containing the smart card recovery file. 4. Insert a smart card into the reader. If the card is not initialized, you will be prompted to initialize it. For detailed instructions on initializing the smart card, refer to "Initializing the smart card," earlier in this chapter. 5. In the - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 22
it. For more information, refer to "Restoring smart card data," earlier in this chapter. To create a replacement smart card with a manually generated smart card password: 1. Initialize a new smart card. For instructions, refer to "Initializing the smart card," earlier in this chapter. 2. Store the - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 23
Java Card Security for HP ProtectTools manages the Java Card setup and configuration for computers equipped with an optional smart card reader. With Java Card Security, you can ● Access Java Card security features. ● Work with the Computer Setup utility to enable Java Card authentication in a power - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 24
features may be unavailable or incorrectly displayed. To select the smart card reader: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Java Card Security, and then click General. 3. Insert the Java Card into the smart card reader. 4. In the right pane - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 25
before it can be used for power-on authentication. To assign a Java Card PIN: NOTE The Java Card PIN must be between 4 and 8 numeric characters. 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Java Card Security, and then click General. 3. Insert a new - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 26
Computer Setup. Refer to "Enabling and disabling smart card or Java Card power-on authentication support," in Chapter 5, "BIOS Configuration for HP ProtectTools." 2. Enable Java Card power-on authentication in Java Card Security. Refer to "Enabling Java Card power-on authentication and creating an - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 27
and creating an administrator Java Card To enable Java Card power-on authentication: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Java Card Security, and then click Advanced. 3. When the Computer Setup Password dialog box displays, enter your Computer - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 28
disable Java Card power-on authentication, the use of the Java Card is no longer needed to access the computer. 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Java Card Security, and then click Advanced. 3. When the Setup Password dialog box displays - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 29
avoid loss of access to the computer, do not save the recovery file on the computer hard drive; you will not be able to access the file without the Java Card. Also, a recovery file saved on the hard drive may be accessible to others, posing a security risk. 6. Enter a recovery file password in the - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 30
box displays, enter your Computer Setup setup password, and then click OK. 4. Insert the diskette or other media containing the Java Card recovery file. 5. Insert a Java Card into the reader. If the card has not been assigned a PIN, you will be prompted to create a PIN. For detailed instructions on - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 31
Encryption File System (EFS) file and folder encryption ● Creation of a personal secure drive (PSD) for protecting user data ● Data management functions, such as backing up and restoring the key hierarchy ● Support for third-party applications (such as Microsoft® Outlook and Internet Explorer) for - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 32
in BIOS Configuration for HP displayed in the lower-left corner of the screen. 2. If you have not set an administrator password, use the arrow keys to select Security > Setup password, and then press enter. 3. Type screen instructions. 26 Chapter 4 Embedded Security for HP ProtectTools ENWW - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 33
users. To initialize the embedded security chip: 1. Right-click the HP ProtectTools Security Manager icon in the notification area, at the far right click Finish. You can start the wizard manually to set up a basic user account at any time by following the instructions in the next section. ● If you - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 34
open, select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane one from a certification authority. For instructions on configuring your e-mail and obtaining select the appropriate certificate, and then click Next. 10. Select the drive letter and label for the PSD, and then - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 35
and folders ● Sending and receiving encrypted e-mail Using the Personal Secure Drive After setting up the PSD, you are prompted to enter the Basic password is entered correctly, you can access the PSD directly from Windows Explorer. Encrypting files and folders When working with encrypted files, - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 36
the Basic User Key password: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Embedded Security, and then click User Settings. 3. In the right pane, under Basic User Key password, click Change. 4. Type the old password, and then set and confirm the new - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 37
To create a backup file: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Embedded Security, and the initialization wizard, click Finish, and then follow the on-screen instructions to complete the initialization. For more information, refer to "Setting - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 38
HP ProtectTools Security Manager. 2. In the left pane, click Embedded Security, and then click Advanced. 3. In the right pane, under Owner Password, click Change. 4. Type disabled at 2 different levels: ● Temporary disabling-With this option, embedded security is automatically reenabled on Windows - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 39
Migrating keys with the Migration Wizard Migration is an advanced administrator task that allows the management, restoration, and transfer of keys and certificates. For details on migration, refer to the Embedded Security online Help. ENWW Advanced tasks 33 - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 40
managed by Computer Setup. With BIOS Configuration, you can ● Manage power-on passwords and administrator passwords. ● Configure other power-on authentication features, such as enabling smart card passwords and embedded security authentication support. ● Enable and disable hardware features, such as - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 41
HP ProtectTools Security Manager. 2. In the left pane, click BIOS Configuration. 3. Enter your Computer Setup administrator password at the BIOS administrator password prompt, and then click OK. NOTE The BIOS administrator password prompt is displayed (Sec). 6. Enable or disable MultiBoot. 7. If you - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 42
NOTE Some of the items listed below may not be supported by your computer. To enable or disable devices or security options: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click BIOS Configuration. 3. Enter your Computer Setup administrator password at the - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 43
Core CPU ● Automatic Intel® SpeedStep Functionality Support ● Fan Always on While on AC Power ● BIOS DMA Data Transfers ● Intel or AMD PSAE Execution Disable ● Built-In Device Options ● Embedded WLAN Device Radio ● Embedded WWAN Device Radio ● Embedded Bluetooth® Device Radio ● LAN/WLAN Switching - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 44
settings Some of the features of HP ProtectTools Security Manager can be managed in BIOS Configuration. Enabling and disabling smart card or Java Card power-on authentication support Enabling this option allows you to use the smart card or the Java Card for user authentication when you turn - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 45
4. In the left pane, click Security. 5. Under Embedded Security, click Enable Power-on Authentication Support. NOTE To disable power-on authentication for Embedded Security, click Disable. 6. Click Apply, and then click OK in the HP ProtectTools window to save your changes. ENWW Advanced tasks 39 - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 46
the Apply or OK button in the HP ProtectTools window. Make sure you remember what password you have set, because you will not be able to undo a password setting without supplying the previous password. The power-on password can protect your notebook from unauthorized use. NOTE After you have - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 47
is replaced by a Change button. Setting the power-on password To set the power-on password: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click BIOS Configuration, and then click Security. 3. In the right pane, next to Power-On Password, click Set. 4. Type - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 48
OK in the HP ProtectTools window to save your changes. Enabling and disabling power-on authentication on Windows restart This option allows you to enhance security by requiring users to enter a power-on, TPM, or smart card password when Windows restarts. To enable or disable power-on authentication - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 49
3. In the right pane, under Password Options, enable or disable Require password on restart. 4. Click Apply, and then click OK in the HP ProtectTools window to save your changes. ENWW Advanced tasks 43 - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 50
using a smart card or biometric reader to log on to Windows. For additional information, refer to "Registering credentials," later in this chapter. ● Single Sign On feature that automatically remembers credentials for Web sites, applications, and protected network resources. ● Support for optional - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 51
logon screen ● From the notification area, by double-clicking the HP ProtectTools Security Manager icon ● From the "Credential Manager" page of ProtectTools Security Manager, by clicking the Log On link in the upper-right corner of the window 2. Click Next. 3. Type your user name in the User name - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 52
icon in the notification area. The HP ProtectTools Security Manager window opens. 2. In the left pane, click Credential Manager, and then click Log On in the upper-right corner of the right pane. The Credential Manager Logon Wizard opens. 3. Type your Windows password in the Password box, and - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 53
the fingerprint registration process, right-click the highlighted finger on the screen and then click Clear or Clear All. 4. Follow the instructions in the wizard to register a second finger. NOTE If you click Finish before registering at least two fingers, an error message is displayed. Click - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 54
click Next. 6. Follow the on-screen instructions to complete the registration. Registering a USB eToken 1. Be sure that the USB eToken drivers are installed. NOTE Refer to the USB eToken user guide for more information. 2. Select Start > All Programs > HP ProtectTools Security Manager. 3. In the - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 55
card or USB token. The token is saved either on the computer hard drive or in the Windows registry Windows logon password 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Credential Manager. 3. In the right pane, click Change Windows Password. 4. Type - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 56
page, select the device type you want to use to store the backup, and then click Next. NOTE You will need to know the password or PIN for the device you select for the backup file. 6. Follow the on-screen instructions, and then click Finish. 50 Chapter 6 Credential Manager for HP ProtectTools ENWW - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 57
for the backup file. 5. Follow the on-screen instructions, and then click Finish. 6. Click Yes in the confirmation dialog box. Clearing an identity from the system NOTE This does not affect your Windows user account. 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 58
2. If you have not registered your fingerprint to log on to Windows, click the keyboard icon in the upper-left corner of the screen next to the fingerprint icon. The Credential Manager Logon Wizard opens. 3. Click the User name arrow and click your name. 4. Type your password in the Password box and - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 59
HP ProtectTools Security Manager. 2. In the left pane, click Credential Manager, and then click Services and Applications. 3. In the right pane, click Windows Logon, and then click Add a Network Account. The Add Network Account Wizard opens. 4. Type card, fingerprint manually. ENWW General tasks 53 - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 60
manual (drag and drop) registration 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Credential Manager, and then click Services Click Finish. 9. Type the logon credential-for example, the user name and password-into the application box. 10. In the - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 61
Manager, and then click Services and Applications. 3. In the right pane, under Single Sign On, click Manage Applications and Credentials. 4. Click the application entry you want to export. Then click More > Applications > Export Script. 5. Follow the on-screen instructions to complete the export - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 62
> Import Script. 5. Follow the on-screen instructions to complete the import. 6. Click OK. Modifying credentials 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Credential Manager, and then click Services and Applications. 3. In the right pane - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 63
HP ProtectTools Security Manager. 2. In the left pane, click Credential Manager, and then click Services General tab. Select one of the following settings: ● Disabled (Cannot be used) ● Enabled (Can be used the application Properties dialog box. 10. Click OK. Removing protection from an application To - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 64
> All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Credential Manager, and then click Services and Applications. 3. opens. 6. Click the General tab. Select one of the following settings: ● Disabled (Cannot be used) ● Enabled (Can be used without restrictions) ● Restricted - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 65
the "Authentication and Credentials" page, you can specify which type or combination of credentials are required of either users or administrators how users or administrators log on: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Credential Manager, and - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 66
methods each time they log on.) 9. Click OK. 10. Click Apply, and then click OK to save your : 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left type you want to modify: ● To register the credential, click Register, and then follow the on-screen instructions - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 67
of logon screens, automatic logon to registered logon dialogs, and password display. ● Services and Applications-Allows you to view the available services and modify the settings for those services. ● Security-Allows you to select the fingerprint reader software and adjust the security level of the - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 68
Example 2-Using the "Advanced Settings" page to require user verification before Single Sign On 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Credential Manager, and then click Settings. 3. In the right pane, click the Single Sign On tab. 4. Under - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 69
This security tool is available to administrators only. Device Access Manager for HP ProtectTools has security features that provide protection against unauthorized access to devices attached to your computer system. These features include the following: ● Device profiles are - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 70
you first attempt to apply device profiles, HP ProtectTools Security Manager opens a dialog box to ask if you would you like to start the background service. Click Yes to start the background service and set it to start automatically whenever the system boots. 64 Chapter 7 Device Access Manager for - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 71
deny access to the following classes of devices: ● USB devices for all non-administrators ● All removable media (floppy disks, pen drives, etc.) for all non-administrators ● All DVD/CD-ROM drives for all non-administrators ● All serial and parallel ports for all non-administrators To deny access to - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 72
granted or denied access to types of devices. Adding a user or a group 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. OK. Denying access to a user or group 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Device Access Manager, and - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 73
for one user but not the group: 1. Select Start > All Programs > HP ProtectTools Security Manager. 2. In the left pane, click Device Access Manager, and a user to be allowed access, and then click OK. 10. Click Allow to grant this user access. 11. Click Apply, and then click OK. - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 74
BIOS unlocks the hard drive for the user. Biometric Category of authentication credentials that use a physical feature, such as a fingerprint, to identify a user. BIOS profile Group of BIOS There are many types of data encryption, and they are the basis of network security. Common types include Data - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 75
, it is used to authenticate the owner to a computer. Virtual token Security feature that works very much like a smart card and reader. The token is saved either on the computer hard drive or in the Windows registry. When you log on with a virtual token, you are asked for a user PIN to complete the - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 76
30 setting 28 biometric readers 47 BIOS administrator card password changing 10 definition 3 BIOS administrator password 3 BIOS Configuration for HP ProtectTools Automatic DriveLock 40 boot options 35 HP ProtectTools settings, managing 38 Java Card power-on authentication 38 password options - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 77
49 Windows Logon 52 Windows logon 52 Windows logon password, changing 49 Windows logon, allow 61 D Device Access Manager background service 64 device disable 32 Java Card power-on authentication 21 power-on authentication 38 smart card authentication 38 smart card BIOS security 8 smart card BIOS - Compaq nx6330 | ProtectTools (Select Models Only) - Windows Vista - Page 78
power-on 41 setting setup 41 smart card administrator 9 smart card administrator, changing 10 smart card user, setting and changing 11 storing administrator or user card 12 Windows logon 49 personal secure drive (PSD) 29 power-on authentication enabling and disabling 38 on Windows restart 42 power
HP ProtectTools
Getting Started