Compaq nx7400 Computer Setup - Windows XP and Windows Vista
Compaq nx7400 - Notebook PC Manual
View all Compaq nx7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq nx7400 manual content summary:
- Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 1
Computer Setup User Guide - Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 2
Company, L.P. Windows is a U.S. registered trademark of Microsoft Corporation. Bluetooth is a trademark HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP - Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 3
Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. ENWW iii - Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 4
iv Product notice ENWW - Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 5
Table of contents 1 Starting Computer Setup 2 Using Computer Setup Navigating and selecting in Computer Setup 2 Restoring factory settings in Computer Setup 3 3 Computer Setup menus File menu ...4 Security menu ...5 Diagnostics menu ...6 System Configuration menu ...6 Index ...8 ENWW v - Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 6
vi ENWW - Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 7
. You must use the keyboard to navigate and make selections. NOTE: An external keyboard connected by USB can be used with Computer Setup only if USB legacy support is enabled. To start Computer Setup, follow these steps: 1. Turn on or restart the computer. 2. Before Windows® opens and while the "F10 - Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 8
turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. Because Computer Setup is not Windows-based, it does not support the TouchPad. Navigation Exit. Then follow the instructions on the screen. ● - Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 9
were set at the factory, follow these steps: 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = Then follow the instructions on the screen. Your preferences go into effect when the computer restarts. NOTE: Your password settings and security - Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 10
computer and the batteries in the system. ● View specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version. Replace the configuration settings in Computer Setup with the original factory settings. (Password settings and security - Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 11
drive and on optional MultiBay hard drives. ● Change a DriveLock user password or master password. NOTE: DriveLock settings are accessible only when you enter Computer Setup by turning on (not restarting) the computer. Enable/disable support for smart card and Java™ Card poweron authentication. NOTE - Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 12
drive. Run a comprehensive check on system memory. Verify the system components needed for starting support. When enabled, USB legacy support allows the following: ● Use of a USB keyboard, mouse, and hub in Computer Setup even when a Windows BIOS DMA data transfers. 6 Chapter 3 Computer Setup - Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 13
power by turning off the LAN when not in use. ● Enable/disable SATA Native Mode. ● Enable/disable Dual Core CPU. ● Enable/disable Secondary Battery Fast Charge. ● Choose Bit-shift or LBA assisted HDD Translation Mode. ● Enable/disable Windows direct application launcher. ● Enable/disable HP Lockout - Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 14
smart card security 5 startup check 6 stringent security 5 System Configuration menu 6 system fan 7 system information 4 U USB legacy support 1, 6 F File menu 4 H hard drive test 6 L LAN Power Save 7 language, changing in Computer Setup 6 legacy support, USB 1, 6 M memory check 6 8 Index ENWW - Compaq nx7400 | Computer Setup - Windows XP and Windows Vista - Page 15
Computer Setup
User Guide