Compaq nx7400 External Devices - Windows Vista

Compaq nx7400 - Notebook PC Manual

Get Compaq nx7400 - Notebook PC PDF manuals and user guides View all Compaq nx7400 manuals
Add to My Manuals
Save this manual to your list of manuals

Compaq nx7400 manual content summary:

  • Compaq nx7400 | External Devices - Windows Vista - Page 1
    External Devices Document Part Number: 419432-001 January 2007 This guide explains how to use optional external devices with the computer.
  • Compaq nx7400 | External Devices - Windows Vista - Page 2
    Contents 1 Using a USB device Connecting a USB device 1-2 Stopping a USB device 1-2 Required USB software 1-3 USB legacy support 1-3 2 Using a 1394 device Connecting a 1394 device 2-1 Stopping a 1394 device 2-2 Required 1394 software 2-2 3 Using the docking connector External Devices ii
  • Compaq nx7400 | External Devices - Windows Vista - Page 3
    Bus (USB) is a hardware interface that can be used to connect an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub, to the computer or to an optional docking device. A hub provides additional USB ports for the system and can be connected to the computer or to
  • Compaq nx7400 | External Devices - Windows Vista - Page 4
    ✎ The first time you connect a USB device, the "Installing device driver software" message is displayed in the notification area, at the far right system, stop a USB device before removing it. To stop a USB device: 1. Double-click the Safely Remove Hardware icon in the notification area, at
  • Compaq nx7400 | External Devices - Windows Vista - Page 5
    with the device. For more information about device-specific software, refer to the manufacturer's instructions included with the device. USB legacy support USB legacy support (enabled by default) allows you to ■ Use a keyboard, mouse, or hub connected to a USB port on the computer during startup or
  • Compaq nx7400 | External Devices - Windows Vista - Page 6
    to the computer. Scanners, digital cameras, and digital camcorders often require a 1394 connection. The computer 1394 port, illustrated below, also supports IEEE 1394a devices. Connecting a 1394 device Ä CAUTION: To prevent damage to the 1394 port connectors, use minimal force to connect a 1394
  • Compaq nx7400 | External Devices - Windows Vista - Page 7
    stop the device before you remove it. 3. Click Stop, and then click OK. Required 1394 software Some 1394 devices may require additional software, usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions included with the device
  • Compaq nx7400 | External Devices - Windows Vista - Page 8
    3 Using the docking connector The docking connector on the bottom of the computer allows you to connect the computer to an optional docking device. An optional docking device provides additional ports and connectors that can be used with the computer. External Devices 3-1
  • Compaq nx7400 | External Devices - Windows Vista - Page 9
    2007 Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
External Devices
Document Part Number: 419432-001
January 2007
This guide explains how to use optional external devices with the
computer.