Compaq nx7400 Memory Modules - Windows Vista

Compaq nx7400 - Notebook PC Manual

Get Compaq nx7400 - Notebook PC PDF manuals and user guides View all Compaq nx7400 manuals
Add to My Manuals
Save this manual to your list of manuals

Compaq nx7400 manual content summary:

  • Compaq nx7400 | Memory Modules - Windows Vista - Page 1
    Memory Modules Document Part Number: 419435-001 January 2007 This guide explains how to replace and upgrade memory in the computer.
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 2
    Contents Adding or replacing memory modules Adding a memory module to the expansion memory module slot 2 Upgrading a memory module in the primary memory module slot 7 Index Memory Modules ii
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 3
    can be increased by replacing the existing memory module in the primary memory module slot or the expansion memory module slot. Å WARNING: To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. Ä CAUTION
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 4
    or replacing memory modules Adding a memory module to the expansion memory module slot To replace or add a memory module in the expansion memory module slot: the power cord from the AC outlet. 6. Turn the computer upside down on a flat surface. 7. Remove the battery from the computer. 2 Memory
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 5
    Adding or replacing memory modules 8. Loosen the memory module compartment cover screw 1. 9. Lift the memory module compartment cover 2 away from the computer. Memory Modules 3
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 6
    module tilts up. Ä To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components of the memory module. b. Grasp the edge of the memory module 2, and gently pull the module out of the memory slot. To protect a memory module after removal, place it in an
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 7
    replacing memory modules 11. Insert a new memory module: a. Align the notched edge 1 of the memory module with the tab in the memory module slot. Ä To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. With the memory
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 8
    module compartment cover with the notches on the computer. 13. Close the cover 2. 14. Tighten the memory module compartment cover screw 3. 15. Replace the battery. 16. Reconnect external power and external devices. 17. Turn on the computer. If the computer displays a message indicating that the
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 9
    or replacing memory modules Upgrading a memory module in the primary memory module slot To upgrade a memory module in the primary memory module slot: 1. the power cord from the AC outlet. 6. Turn the computer upside down on a flat surface. 7. Remove the battery from the computer. Memory Modules
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 10
    Adding or replacing memory modules 8. Remove the 2 keyboard screws. 9. Turn the computer over and open it. 8 Memory Modules
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 11
    or replacing memory modules 10. Slide the 4 keyboard latches 1 to release the keyboard. Ä To avoid damage to the computer, do not disengage the keyboard connector or pointing stick cable. 11. Gently lift the top edge of the keyboard 2 and rotate it toward the front of the computer until the keyboard
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 12
    Adding or replacing memory modules 12. Remove the memory module from the memory module slot: a. Pull away the retention clips 1 on each side of the memory module. The memory module tilts up. Ä To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 13
    or replacing memory modules 13. To insert a memory module: a. Align the notched edge 1 of the memory module with the tab in the memory module slot. Ä To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. With the memory
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 14
    Adding or replacing memory modules 14. Return the keyboard to its previous position 1 and slide the 4 keyboard latches 2 to lock the keyboard. 12 Memory Modules
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 15
    computer upside down on a flat surface. 16. Replace the keyboard screws. 17. Replace the battery. 18. Reconnect external power and external devices. 19. Turn on the computer. If the computer displays a message indicating that the size or configuration of the memory has changed, press f1 to save the
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 16
    C compartment, memory module 1 E electrostatic discharge (ESD) 1 ESD (electrostatic discharge) 1 M memory module compartment 1 memory module compartment, expansion 2 memory module, removing or inserting 2 Index Memory Modules Index-1
  • Compaq nx7400 | Memory Modules - Windows Vista - Page 17
    warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Memory Modules First Edition: January 2007 Document Part Number: 419435-001
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
Memory Modules
Document Part Number: 419435-001
January 2007
This guide explains how to replace and upgrade memory in the
computer.