Craftsman 11483 Operation Manual
Craftsman 11483 - C3 19.2 Volt Impact Driver Manual
 |
View all Craftsman 11483 manuals
Add to My Manuals
Save this manual to your list of manuals |
Craftsman 11483 manual content summary:
- Craftsman 11483 | Operation Manual - Page 1
iMPACT DRIVER VARIABLE SPEED/REVERSIBLE Model No. 315.114831 ,_IL WARNING: To reduce the risk of injury, the user must read and understand the operator's manual IL 60179 USA Visit the Craftsman web page: www.sears.com/craftsman C 983000-987 Save this manual for future reference 04-24-08 (REV:02 - Craftsman 11483 | Operation Manual - Page 2
[] Features ... 7-8 [] Assembly ...[] Operation ...[] Maintenance ... 8 9-12 13 [] Exploded View and Parts List ... 14 [] Parts Ordering/Service ... Back Page ONE-YEAR FULL WARRANTY ON CRAFTSMAN TOOL If this Craftsman tool fails to give complete satisfaction within one year from date of purchase - Craftsman 11483 | Operation Manual - Page 3
do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. [] Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the - Craftsman 11483 | Operation Manual - Page 4
instruction manual. [] When servicing a power tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury. [] Wear ear protectors with impact - Craftsman 11483 | Operation Manual - Page 5
Time Alternating Current Direct Current no No Load Speed [] Class II Tool Type of current Type or a characteristic of current Rotational speed, reduce the risk of injury, user must read and understand operator's manual before using this product. Always wear safety goggles or safety glasses with - Craftsman 11483 | Operation Manual - Page 6
. If you do not understand the warnings and instructions in the operator's manual, do not use this product. Call the Craftsman Consumer Helpline at 1-800-932-3188 for assistance. ,_, WARNING: The operation of any power tool can result in foreign objects being thrown into your eyes, which can result - Craftsman 11483 | Operation Manual - Page 7
PRODUCT SPECiFICATiONS Coupler 1/4 in. Keyless Motor 19.2 Volt DC Switch VSR (Variable Speed Reversible) No Load Speed 0-2,400 r/min. (RPM) Blows Per Minute 0-3,500 BPM* Torque 900 in.lb. *Blows per minute BUILT-IN COUPLER LED WORKLIGNT SWITCH TRIGGER DIRECTIONOF ROTATIONSELECTOR (FORWARD/ - Craftsman 11483 | Operation Manual - Page 8
call 1-800-932-3188 for assistance. PACKING LIST 1/4 in. Impact Driver Single-ended Bits (2) Magnetic Bit Holder 1/4 in. Socket Adapter Operator's Manual _, WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could result - Craftsman 11483 | Operation Manual - Page 9
or safety glasses with side shields when operating tools. Failure to do so could result in objects impact socket This product will accept DieHardo 19.2 V lithium-ion battery packs and Craftsman 19.2 V nickel-cadmium battery packs. For complete charging instructions, refer to the Operator's Manual - Craftsman 11483 | Operation Manual - Page 10
trigger and allow the coupler to come to a complete stop. NOTE: The impact driver will not run unless the direction of rotation selector is pushed fully to the left or right. COUPLER Fig. 4 BUILT-IN COUPLER See Figure 4. The tool has a built-in coupler. The coupler has been designed to accept 1/4 in - Craftsman 11483 | Operation Manual - Page 11
BIT STORAGE See Figure 6. When not in use, bits provided with the tool can be placed in the storage area located at the bottom of the tool handle. ( SCREWDRIVER BiTS INSTALLING THE MAGNETIC BIT HOLDER AND DRILL BIT OR SOCKET ADAPTOR See Figure 8. [] Lock the switch trigger by placing the direction - Craftsman 11483 | Operation Manual - Page 12
in the correct position for the operation. [] Hold the impact driver with one hand. [] Place the bit on the screw impacting will begin. _hL WARNING: Do not drive a screw where there is likely to be hidden wiring behind the surface. Contact with a "live" wire will make exposed metal parts of the tool - Craftsman 11483 | Operation Manual - Page 13
A WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. A WARNING: Always wear safety goggles or safety glasses with side shields when using compressed air to clean tools. If the operation is dusty, also wear a - Craftsman 11483 | Operation Manual - Page 14
_' CRAFTSMAN 19.2 VOLT IMPACT DRIVER - MODEL NUMBER 315.114831 The nmuomdbeel r niunmablel rcowrriellspboendfoeunncde onreagaprldaitneg ayttoaucrheIdMPtAoCtThe DmRoItVoEr Rhooursiwngh,enAlowradyesringmernetpioanir tphaertsm, odel SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS 2 1 Key Pa_ No.
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
 |
 |
PERATOR'S
MANUAL
114
in,,
19,2
VOLT iMPACT
DRIVER
VARIABLE SPEED/REVERSIBLE
Model
No.
315.114831
,_IL
WARNING:
To reduce the risk of
injury,
the user must read and understand
the
operator's
manual before using this
product.
BATTERIES
AND
CHARGERS
SOLD
SEPARATELY
Customer
Help
Line:
1-800-932-3188
Sears,
Roebuck
and
Co., 3333
Beverly
Rd., Hoffman
Estates,
IL 60179
USA
Visit the Craftsman
web page: www.sears.com/craftsman
983000-987
Save
this
manual
for
future
reference
04-24-08
(REV:02)
C