Craftsman 11726 Operation Manual
Craftsman 11726 - 3 x 21 in. Belt Sander Manual
 |
View all Craftsman 11726 manuals
Add to My Manuals
Save this manual to your list of manuals |
Craftsman 11726 manual content summary:
- Craftsman 11726 | Operation Manual - Page 1
Operator's Manual [CRRFTSMRNq Belt Sander Double Insulated Model No. 315.117260 Save this manual for future reference. _, WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and - Craftsman 11726 | Operation Manual - Page 2
to state. Sears, Roebuck and Co., Dept. 817 WA, Hoffman Estates, IL 60179 Your belt sander has many manual. Pay close attention to the safety rules, including Dangers, Warnings, and Cautions. If you use this product properly and only as intended, you will enjoy years of safe, reliable service - Craftsman 11726 | Operation Manual - Page 3
injury. SAVE THESE INSTRUCTIONS WORK AREA • • Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control If damaged, have the tool serviced before using. Many accidents are recommended by the manufacturer for your model. Accessories that may be suitable - Craftsman 11726 | Operation Manual - Page 4
personnel could result in a risk of injury. • When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury. • Hold - Craftsman 11726 | Operation Manual - Page 5
. It may also be used to alert against unsafe practices that may cause property damage. Important: Advises you of important information or instructions vital to the operation or maintenance of the equipment. Note: Advises you of additional information concerning the operation or maintenance of the - Craftsman 11726 | Operation Manual - Page 6
. When servicing, use only identical Craftsman replacement parts. _, intendedWARpNrToIhNteeGct:dothuebleutsoeinrsufrloamtedshsoycsktemresuislting from a break in the tool's internal wiring. Observe alt normal safety precautions to avoid electrical shock. ELECTRICAL CONNECTION The belt sander has - Craftsman 11726 | Operation Manual - Page 7
INSTRUCTIONS Your belt sander has been shipped completely assembled. • Carefully remove the tool damaged or missing, please call 1-800-932-3188 for assistance. PACKING LIST Belt Sander Sanding Belt Dust Collection Bag Operator's Manual ,_ WARNING: If any parts are missing, do not operate your tool - Craftsman 11726 | Operation Manual - Page 8
. Careless actions, for even a fraction of a second, can result in serious personal injury. Your new belt sander is equipped with the following features. See Figure 1. LOCK-ON The lock-on feature allows you to lock the trigger switch in the ON position. - Craftsman 11726 | Operation Manual - Page 9
DUST COLLECTIONBAG REAR HANDLE FRONT HANDLE TENSION RELEASELEVER TRACKING KNOB SANDING BELT LOCK-ON BUTTON TRIGGER SWITCH BLOWER EXHAUSTHOLE 9 Fig. 1 - Craftsman 11726 | Operation Manual - Page 10
steps to install or change sanding belts. • Unplug the sander. • Raise the tension release lever. Note: If you are changing sanding belts, remove the old sanding belt at this time. Install the sanding belt. A CAUTION: If the sanding belt is not a bidirectional belt, ensure that the arrow inside the - Craftsman 11726 | Operation Manual - Page 11
tracking. When correctly adjusted, the outer edge of the sanding belt should be even with the outer edge of the base of the sander. When you install a new sanding belt, you may need to adjust the sanding belt tracking several times until the belt becomes pliable. Follow these steps to adjust sanding - Craftsman 11726 | Operation Manual - Page 12
See Figure 7. • Zip up the dust bag. • Replace the dust collection bag. Follow these steps to attach the dust collection bag. • Unplug the sander. Note: Periodically, you should turn the dust bag inside-out and thoroughly clean it. _ WARNING: Failure to unplug the tool could result in serious - Craftsman 11726 | Operation Manual - Page 13
slowly over the work surface, using the rear handle to control the sander and the front handle to guide the sander. Note: Allowing the sander to remain in one place will result in an uneven surface. _, WARNING: Keep a firm grip on the sander with both hands at all times. Failure to do so could - Craftsman 11726 | Operation Manual - Page 14
two-handed operation, which aids in maintaining control, keeping the sanding area level with the workpiece, and keeping hands clear of the sanding belt. When operating the sander, always hold the front handle with your left hand and the rear handle with your right hand. ,1_ WARNING: Keep hands and - Craftsman 11726 | Operation Manual - Page 15
servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. ,_ WARNING: The belt sander of the double insulation system and should be serviced only by a qualified Sears service technician. Avoid using solvents when cleaning plastic - Craftsman 11726 | Operation Manual - Page 16
-- CRAFTSMAN BELT SANDER - MODEL NUMBER 315.117260 -- SEE NOTE 8 5 10 \ 14 4 3 9 Note: The assembly shown represents an important part of the double insulated system. To avoid the possibility of alteration or damage to the system, service should be performed by your nearest Sears repair center - Craftsman 11726 | Operation Manual - Page 17
-- CRAFTSMAN BELT SANDER - MODEL NUMBER 315.117260 -- I The model number wilt be found on a plate attached to the motor housing. Always mention the model ! number in all correspondence regarding your BELT SANDER or when ordering repair parts. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS Key No. - Craftsman 11726 | Operation Manual - Page 18
replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and pour service en fran_:ais: 1-800-LE-FOYER Mc (1-800-533-6937) www.sears.ca ® Registered Trademark / TM Trademark / SM Service Mark of Sears, Roebuck
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
 |
 |
Operator's Manual
[CRRFTSMRNq
Belt Sander
Double Insulated
Model No.
315.117260
Save this manual
for future
reference.
_,
WARNING:
To reduce
the risk of injury,
the user
must
read and
understand
the operator's
manual
before
using this
product.
Customer
Help
Line:
1-800-932-3188
Sears,
Roebuck
and
Co.,
3333
Beverly
Rd.,
Hoffman
Estates,
IL 60179
USA
Visit
the Craftsman
Web
page:
www.sears.com/craftsman
COUS
983000-260
9-03