Cub Cadet 3X 30 HD 3X 26034 Operator's Manual

Cub Cadet 3X 30 HD Manual

Get Cub Cadet 3X 30 HD PDF manuals and user guides View all Cub Cadet 3X 30 HD manuals
Add to My Manuals
Save this manual to your list of manuals

Cub Cadet 3X 30 HD manual content summary:

  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 1
    Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty Operator's Manual Three Stage Snow Thrower - 3X 26, 3X 26 HD, 3X 28, & 3X 30 HD WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 2
    To The Owner 1 Thank You Thank you for purchasing a Cub Cadet Snow Thrower. It was carefully engineered to provide excellent performance when properly operated and maintained. Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 3
    or death. Training 1. Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts. 2. Be familiar with all controls and their proper
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 4
    rim accessories approved by the manufacturer (e.g. wheel weights, tire chains, cabs etc.). 20. When starting engine manual, use and automatically return to the disengaged position when care and good judgment. Contact Customer Support for released. assistance and the name of your nearest servicing
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 5
    engine. 5. Snow thrower shave plates and skid shoes are subject to wear and damage. For your safety protection, frequently check all components and replace with original equipment manufacturer's (OEM) parts only. "Use of parts manual for instructions. 7. Maintain or replace safety and instruction
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 6
    HOT SURFACE Engine parts, especially the muffler, become extremely hot during operation. Allow engine and muffler to cool before touching. WARNING! Your Responsibility-Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in this manual and
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 7
    Contents of Carton • Snow Thrower • Replacement Auger Shear Pins • Chute Control Rod or Flex Shaft • Engine Manual • Snow Thrower Operator's Manual • Chute Assembly (above), see page 8 for assembly instructions. If your product resembles the image on the right (above), see page 10 for
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 8
    3. Observe the lower rear area of the snow thrower to be sure both cables are aligned with roller guides before pivoting the handle upward. Pivot the head and clevis pin and bow-tie cotter pin from chute support bracket. See Figure 3-3. Chute Control Head Chute Support Bracket Chute Chute
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 9
    : The chute will not rotate without squeezing the trigger on the joystick. Figure 3-8 NOTE: The chute control rod will fit snuggly into the pinion gear. Support the rear of the dash panel with one hand while inserting the rod with your other hand to ensure the rod is inserted all the
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 10
    -tie cotter pin 3. Cut zip ties securing flex shaft to the lower handle and set the flex shaft aside. removed in step 1. See Figure 3-3. 4. Remove rubber bands securing cables to carriage screws 9. Check that all cables are properly routed through the cable guide on top of the engine. See Figure
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 11
    NOTE: Make certain the cables are seated properly in the roller guides. See Figure 3-13. Chute Assembly 1. Remove the lock nuts and hex screws from chute support bracket. Position the chute assembly over the chute base. See Figure 3-15. Chute Control Head 1 2 Figure 3-13 5. Reattach the two
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 12
    that all cables are properly routed through the cable guide on top of the engine. See Figure 3-10. Set-Up Shear Pins Storage Replacement auger shear pins and bow tie cotter pins are included with your snow thrower. Store them in your snow thrower's dash panel until needed. See Figure 3-20. Figure
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 13
    when seating beads may cause tire/rim assembly to burst with force sufficient to cause serious injury. Refer to sidewall of tire for recommended pressure. The tires are over-inflated for shipping purposes. Check the tire pressure before operating the snow thrower. Refer to the tire side wall
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 14
    off the engine. Wait for ALL moving parts to stop snow thrower, carefully read and follow all instructions below. Perform all adjustments to verify your snow thrower snow thrower engine. Refer to your Engine Operator's Manual. 3. While standing in the operator's position (behind the snow thrower
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 15
    Shoe † If Equipped Figure 4-1 Snow thrower controls and features are described based on surface conditions. Adjust upward for hard-packed snow. Adjust downward when operating on gravel or crushed rock augers rotate and draw snow into the auger housing. Chute Assembly Snow drawn into the auger
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 16
    handle. Squeeze the control grip against the handle to engage the augers and start snow throwing action. Release to stop. Drive Control / Auger Clutch Lock To activate the control to turn left. CAUTION: Operate the snow thrower in open areas until you are familiar with these controls. 16 Section 4
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 17
    Maneuver the snow thrower so that the cutters penetrate a high standing snow drift to assist snow falling into the augers for throwing. Chute Clean-Out Tool WARNING! Never use your hands to clear a clogged chute assembly. Shut off engine and remain behind handles until all moving parts have stopped
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 18
    replace the auger shear pins with anything other than OEM Part No.738-04124A replacement shear pins. Any damage to the auger gearbox or other components as a result of failing to do so will NOT be covered by your snow thrower's warranty. WARNING! Always turn off the snow thrower's engine and remove
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 19
    Maintenance & Adjustments 6 Maintenance 3. Engine Refer to the Engine Operator's Manual. 4. Tire Pressure Refer to Assembly and Set-up section for information regarding tire pressure. Shave Plate and Skid Shoes The shave plate and skid shoes on the bottom of the snow thrower are subject to
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 20
    wheels. Auger Shaft At least once a season, remove the shear pins from the auger shafts. Spray lubricant inside the shafts and around five (25) hours of operation. 1. Allow the engine to run until it is out of fuel. 2. Carefully pivot the snow thrower up and forward so that it rests on the
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 21
    the washer and cotter pin. Shift Cable (If Equipped snow thrower forward. The wheels should not turn. The unit should not roll freely. If any of the above tests failed, the drive cable is in need of adjustment. Proceed as follows: 1. Shut off the engine as instructed in the separate engine manual
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 22
    to coat the snow thrower. 4. Clean the exterior of the engine and the snow thrower. IMPORTANT: When storing unit or when it is not being serviced, it is to remain in the operating position with both wheel and auger housing on the ground. NOTE: Refer to the Engine Operator's Manual for information on
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 23
    auger housing. 5. Remove the frame cover from the underside of the snow thrower by removing the self-tapping screws which secure it. See Figure 7-3. 1. Allow the engine to run until it is out of fuel. Do not attempt to pour fuel from the engine. 2. Remove the plastic belt cover on the front of the
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 24
    in order to replace the snow thrower's friction wheel rubber. See your authorized service dealer to have the friction wheel rubber replaced or phone Customer Support as instructed on page 2 for assistance. To inspect the friction wheel, proceed as follows: 1. Allow the engine to run until it is
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 25
    Troubleshooting 8 Problem Cause Remedy Engine fails to start Engine running erratically/ inconsistent RPM (hunting or surging) Engine overheats Excessive vibration Loss of power Unit fails to propel itself Unit fails to discharge snow Chute fails to easily rotate 180 degrees 1. Choke not in
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 26
    790-00550 Shave Plate (3X 26) Shave Plate (3X 26 HD) Shave Plate (3X 28) Shave Plate (3X 30 HD) 951-10630 Key 951-10292 Spark Plug Phone (800) 965-4CUB to order replacement parts or a complete Parts Manual (have your full model number and serial number ready). Parts Manual downloads are also
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 27
    10 The following attachments and accessories are available for your Cub Cadet snow thrower. See your Cub Cadet dealer or the retailer from which you purchased your snow thrower for information regarding price and availability. Model Number Description 929-0071A Extension Cord, 110V 753
  • Cub Cadet 3X 30 HD | 3X 26034 Operator's Manual - Page 28
    tires. Auger Gearbox - Cub Cadet warrants the auger gearbox (on threestage snow thrower models only) against defects in material and workmanship for a period of five (5) years, commencing on the date of the snow thrower's original purchase. HOW TO OBTAIN SERVICE: Warranty service is available, WITH
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
O
PERATOR
’
S
M
ANUAL
Safe Operation Practices • Set-Up • Operation •
Maintenance • Service • Troubleshooting •
Warranty
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
Form No. 769-08980A
(July 2, 2013)
Three Stage Snow Thrower — 3X 26, 3X 26 HD, 3X 28,
& 3X 30 HD