Cub Cadet CS 2210 CS 2210 Operator's Manual

Cub Cadet CS 2210 Manual

Get Cub Cadet CS 2210 PDF manuals and user guides View all Cub Cadet CS 2210 manuals
Add to My Manuals
Save this manual to your list of manuals

Cub Cadet CS 2210 manual content summary:

  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 1
    Operation Practices • Set-Up • Operation • Maintenance • Service • Troubleshooting • Warranty Operator's Manual Model Series CS 2310 Chipper Shredder - Model Series CS 2310 & CS 3310 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 2
    1 Thank You Thank you for purchasing a Chipper Shredder manufactured by Cub Cadet. It was carefully engineered to provide excellent performance when properly operated and maintained. Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 3
    or death. Training 1. Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference and for ordering replacement parts. 2. Be familiar with all controls and their proper
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 4
    intake or discharge opening while the engine is running. Shut the engine off, wait until all moving parts have stopped, disconnect the spark plug wire and ground it against the engine before clearing debris. 9. Never operate without the shredder hopper, chipper chute, or chute deflector properly
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 5
    or grass-covered land unless the heater, furnace, clothes dryer, etc. engine's exhaust system is equipped with a spark 8. Allow machine to cool at least 5 minutes before storing. 9. Always refer to the operator's manual for proper instructions on off-season storage. 10. If the fuel tank has to be
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 6
    on the machine before attempting to assemble and operate. Symbol Description READ THE OPERATOR'S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate WARNING- ROTATING BLADES Keep hands out of inlet and discharge openings while
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 7
    One Safety Glasses Assembly NOTE: This unit is shipped without gasoline or oil in the engine. Fill up gasoline and oil as instructed in the accompanying engine manual BEFORE operating your chipper shredder. Chipper Chute (Model Series CS 3310 Only) For shipping reasons, the unit is crated with its
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 8
    and Oil Fill-Up Refer to the separate engine owner's manual for additional engine information. 1. Add oil provided before starting unit for the first time out of the box. 2. Service the engine with gasoline as instructed in the separate engine owner's manual. WARNING: Use extreme care when handling
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 9
    WARNING: Never operate the chipper shredder with the chipper chute in the raised position. Use the spring latch to lower the chipper chute into the operating position before starting the engine. Lock Rod (Model Series CS 3310 Only) The lock rod is located on the chipper chute support. It is used to
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 10
    this unit or eye shields before chipping or shredding and while performing any adjustments or repairs. Starting Engine IMPORTANT: Because this manual covers several different model units, different starting instructions may apply to your particular engine. Some engines may have a fuel petcock, some
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 11
    , follow instructions under the heading Cleaning the Reduction Chamber in the "Maintainenance & Adjustments" section of this manual. Chipping WARNING: Never operate the chipper shredder without chipper chute lowered into the operating position. Branches up to two inches (model series CS 2310
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 12
    the pivot points on the chute deflector with light oil once a season. 3. Follow the separate engine manual packed with your unit for engine lubrication instructions. Equipment Care • Clean the chipper shredder thoroughly after each use. • Wash bag periodically with water. Allow to dry thoroughly in
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 13
    the surrounding area. To do so, proceed as follows: 1. Stop engine, disconnect spark plug, and make certain the 6. chipper shredder has come to a complete stop. WARNING: The muffler and surrounding area will be hot if the engine has been running. Use caution 7. and protect your hands if working
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 14
    that all moving parts have come to a complete stop. 2. Remove the two flange nuts (and hex bolts) which secure the hopper support bracket to the impeller housing. Retain the hardware. See Figure 7-3. C B A Model Series CS 3310 Shown Figure 7-2 4. Remove the chipper chute by removing three
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 15
    and equipment. Follow lubrication recommendations. Refer to engine manual for correct engine storage instructions. Store equipment in a clean, dry area. Do not store in an area where equipment is present that may use a pilot light or has a component that can create a spark. Section 7 - Service 15
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 16
    in impeller. 3. Low engine RPM. 1. Low engine RPM. 2. Chipper blade dull. 1. Move throttle lever to FAST or START position. 2. Connect wire to spark plug. 3. Move choke lever to CHOKE position. 4. Fill tank with clean, fresh gasoline. 5. Prime engine as instructed in Engine Manual. 6. Clean, adjust
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 17
    Notes 9 17
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 18
    18 Section 9 - Notes
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 19
    Description 942-04050 Shredder Blade 942-0544B Chipper Blade 719-04308 Flail Blade (3 total) 634-04627 10 x 4.0 Pneumatic Wheel Phone (800) 965-4CUB to order replacement parts or a complete Parts Manual (have your full model number and serial number ready). Parts Manual downloads are also
  • Cub Cadet CS 2210 | CS 2210 Operator's Manual - Page 20
    LLC MANUFACTURER'S LIMITED WARRANTY FOR SNOW THROWERS, CHIPPER-SHREDDERS, CHIPPER-SHREDDER VACUUMS, LOG SPLITTERS AND JET SWEEPS The limited warranty set forth below is given by Cub Cadet LLC with respect to new merchandise purchased and used in the United States, its possessions and territories
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
O
PERATOR
’
S
M
ANUAL
Safe Operation Practices • Set-Up • Operation •
Maintenance • Service • Troubleshooting •
Warranty
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
Form No. 769-08249
(June 8, 2012)
Chipper Shredder — Model Series CS 2310 & CS 3310
Model Series CS 2310