Cub Cadet GTX 2000 Garden Tractor GTX 2100 Operator's Manual

Cub Cadet GTX 2000 Garden Tractor Manual

Get Cub Cadet GTX 2000 Garden Tractor PDF manuals and user guides View all Cub Cadet GTX 2000 Garden Tractor manuals
Add to My Manuals
Save this manual to your list of manuals

Cub Cadet GTX 2000 Garden Tractor manual content summary:

  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 1
    • Troubleshooting • Warranty Operator's Manual GT 2000, GTX 2000 & GTX 2100 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. Printed In USA CUB CADET LLC
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 2
    The Owner 1 Thank You Thank you for purchasing a Cub Cadet Garden Tractor. It was carefully engineered to provide excellent performance when properly operated and maintained. Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 3
    wire, bones, toys, and other 1. Read, understand, and follow all instructions on the foreign objects which could be picked up and thrown by machine and in the manual shirts. Loose fitting clothes and jewelry can be instruction. caught in movable parts. Never operate this machine in 5. To help
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 4
    included as part of this manual to tree branches, wires, door the slope. Tires may lose traction instructions provided with the approved accessory or attachment. 6. 28. Data manual, use care and good judgment. Contact your customer service tractor and may cause you to loose control (e.g. tractor
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 5
    over should read and understand the instructions and safe operation practices in this manual and on the machine and should not shift to neutral and coast downhill. Service Safe Handling of Gasoline: 1. To avoid and all moving parts have stopped. Disconnect the spark plug wire and ground against
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 6
    serviced professionally by an authorized Cub Cadet Service manual. "Use of parts servicing them. models may also include a carbon canister. Please contact Customer Support spark plug wire(s) and ground instructions in this manual and on the machine. SAVE THESE INSTRUCTIONS! 6 Section
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 7
    Description READ THE OPERATOR'S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to assemble -over accident. WARNING- ROTATING BLADES Do not put hands or feet near rotating parts or under the cutting deck. Contact with the blade(s) can amputate hands and
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 8
    8 Slope Gauge Section 2 - Important Safe Operation Practices (OK) Figure 1 15° Slope (TOO STEEP) Figure 2 15° Slope 15° dashed line USE THIS SLOPE GAUGE TO DETERMINE IF A SLOPE IS TOO STEEP FOR SAFE OPERATION! To check the slope, proceed as follows: 1. Remove this page and fold along the
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 9
    the red rubber boot over the positive (+) battery terminal to help protect it from corrosion. NOTE: If the battery is put into service after the date shown on top or side of battery, charge the battery as instructed in the Maintenance section your Operator's Manual prior to operating the tractor. 9
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 10
    cigars, pipes and other sources of ignition. NOTE: Your tractor is shipped with oil in the engine. However, you MUST check the oil level before operating. CAUTION: Always check the engine oil level before each use as instructed in the Kohler Owner's Manual. Add oil as necessary. Failure to do so may
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 11
    Hour Meter/Service Indicator PTO/Blade Engage Lever Ignition Switch Module Forward Drive Pedal Reverse Drive Pedal Electric Lift Switch Manual Lift Handle Cutting Height Lever Hydrostatic Transmission Dipstick/Fill Tube Low Gas Window Transmission Bypass Rod Garden Tractor controls and features
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 12
    , refer to both Safety Interlock Switches and Starting The Engine in the Operation section of this manual for detailed instructions regarding the Ignition Switch Module and operating the tractor in REVERSE CAUTION MODE . Forward Drive Pedal The forward drive pedal is located on the right side
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 13
    out. Return the rod to its normal position prior to operating the tractor. If the tractor will not move when pushing on the forward/reverse pedals, or . Charge the battery as instructed in the Service section of this manual or have the charging system checked by your Cub Cadet dealer. Section 4 -
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 14
    malfunction, do not operate tractor. Contact your Cub Cadet dealer. • The safety interlock stop the engine and disconnect the spark plug wire(s). Thoroughly inspect the machine for any damage. section of this manual for Gasoline and Oil fill-up instructions. 1. Insert the tractor key into the
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 15
    immediately if someone enters the area. To use the REVERSE CAUTION MODE : NOTE: The operator MUST be seated in the tractor seat. 1. Start the engine as previously instructed on the previous page. 2. Turn the key from the NORMAL MOWING (Green) position to the REVERSE CAUTION MODE (Yellow
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 16
    pedal with the ball of your foot to travel in reverse. Using the Lift Lever Manual Lift Lever (If so equipped) To raise or lower the cutting deck, move the lift lever. CAUTION: Failure to follow these instructions when operating the tractor's electric lift switch will result in premature wear of the
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 17
    lever to the FAST position. 2. Pull the PTO/Blade Engage lever position. See Figure 5-3. upward into the ON Figure 5-3 NOTE: When operating the tractor be certain that the throttle lever is always in the FAST (rabbit) position. Operating with the throttle at less than full throttle may lead to
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 18
    may vary by model. Not all features in this manual are applicable to all tractor models and the tractor depicted may differ from yours. Engine Refer to the Kohler Owner's Manual for all engine maintenance procedures and instructions. WARNING! Before performing any maintenance or repairs, disengage
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 19
    Manual for refilling instructions, oil type and amount. NOTE: Maintenance, repair, or replacement of the emission control devices and systems which are being done at owner's expense may be performed by any engine repair establishment or individual. Warranty repairs must be performed by a Cub Cadet
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 20
    transmission's cooling fan or on any other part of the machine. Cleaning the Engine Intake the filter base on the transmission housing, tighten the filter an additional 1⁄2- tractor creeps forward or rearward when neither the forward nor reverse pedal is depressed, contact your local Cub Cadet
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 21
    before performing any deck leveling adjustments. Refer to Tires on page 10 for information regarding tire pressure. Seat Adjustment Refer to the Assembly & Set-Up section of this manual for seat adjustment instructions. WARNING! Before operating the tractor, make sure the seat is engaged in the
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 22
    and adjust the pivot axle as follows: 1. Raise the front of the tractor and set it on jack stands, so the front wheels are suspended above the from the steering arms by removing the hex lock nuts. Refer to Figure 6-7. Manually move each wheel to achieve the required toe-in and equal D measurements.
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 23
    the spring is extended the furthest. The bolt can be accessed from the rear of the tractor, inside the left rear wheel. Turning adjusting bolt clockwise will decrease the manual effort required for lifting attachments; turning counterclockwise will increase the effort needed to lift the attachment
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 24
    Service 7 Battery Common Causes For Battery Failure 1. Overcharging 2. Undercharging 3. Loose and/or to unhook from the battery tray. 5. Lift the battery out off the battery tray and remove from the tractor. 6. Position the new battery and lower into the battery tray. 7. Hook the hold-down rod into
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 25
    raise the hood of the tractor. 2. Unplug the wire harness leads from the headlight socket terminals. Note which wire connects to each terminal before disconnecting. 3. Rotate the socket assembly approximately 1⁄4 turn to align the socket tab with the reflector housing notch; then withdraw the bulb
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 26
    Troubleshooting Problem Excessive vibration Mower will not mulch grass (If equipped) Cause 1. high grass. Uneven cut 4. Dull blade. 1. Deck not leveled properly. 2. Dull blade. 3. Uneven tire pressure. 8 Remedy 1. Tighten blade and spindle. 2. Replace blade. 1. Place throttle in FAST (rabbit)
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 27
    Cable 946-04771A Throttle Control Cable 925-2054A Ignition Key 925-0963 12V Bulb Phone (800) 965-4CUB to order replacement parts or a complete Parts Manual (have your full model number and serial number ready). Parts Manual downloads are also available free of charge at www.cubcadet.com. 27
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 28
    are compatible for Cub Cadet GT2000. See your Cub Cadet dealer or the retailer from which you purchased your tractor for information Kit 54" Stamped Mulch Kit Twin Bagger Triple Bagger Weight Kits Tire Chains Oil Siphon Blade Removal Tool 19A40012100 19A40013100 19A40014100 19A40022100 19A40019100
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 29
    Notes 11 29
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 30
    placed into service. The warranty period is two years. Subject to certain conditions and exclusions as stated below, the warranty on emission-related parts is as follows: 1. Any warranted part that is not scheduled for replacement as required maintenance in the written instructions supplied, is
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 31
    , and that such abuse, neglect, or improper maintenance was the direct cause of the need for repair or replacement of the part. That notwithstanding, any adjustment of a component that has a factory installed, and properly operating, adjustment limiting device is still eligible for warranty
  • Cub Cadet GTX 2000 Garden Tractor | GTX 2100 Operator's Manual - Page 32
    by Cub Cadet for use with the product(s) covered by this manual will void your warranty as to any resulting damage. In addition, Cub Cadet may deny warranty coverage if the hour meter, or any part thereof, is altered, modified, disconnected or otherwise tampered with. HOW TO OBTAIN SERVICE: Warranty
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
O
PERATOR
’
S
M
ANUAL
Safe Operation Practices • Set-Up • Operation •
Maintenance • Service • Troubleshooting •
Warranty
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
GT 2000, GTX 2000 & GTX 2100
Form No. 769-08611
(November 2, 2012)