Home » Cub Cadet Manuals » Lawn Mowers » Cub Cadet PRO Z 772S KW » Manual Viewer

Cub Cadet PRO Z 772S KW Owners Manual

Cub Cadet PRO Z 772S KW Manual

View all Cub Cadet PRO Z 772S KW manuals

Add to My Manuals
Save this manual to your list of manuals

Cub Cadet PRO Z 772S KW manual content summary:

Cub Cadet PRO Z 772S KW | Owners Manual - Page 1
Practices 2 Assembly & Set-Up 10 Controls & Operation 14 Service 20 Troubleshooting 28 Replacement Parts 29 Attachments & Accessories 29 Warranties 30 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH
Cub Cadet PRO Z 772S KW | Owners Manual - Page 2
Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 361131, Cleveland, Ohio 44136-
Cub Cadet PRO Z 772S KW | Owners Manual - Page 3
safety signs. 3. All operators and mechanics should be trained to operate or service the equipment. The owner is responsible for training them. 4. Never let , and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep this manual in a safe place
Cub Cadet PRO Z 772S KW | Owners Manual - Page 4
machine by the machine manufacturer. Read, understand and follow all instructions provided with the approved accessory or attachment. 32. Data which are not covered in this manual use care and good judgement. Contact your customer service representative for assistance. Slope Operation Slopes
Cub Cadet PRO Z 772S KW | Owners Manual - Page 5
machine. Children 16 and over should read and understand the about the operator's waist at all times, except when the instructions and safe operation practices in this manual and on ROPS are: the machine and should be trained and supervised by an adult. a. Not properly installed and/or
Cub Cadet PRO Z 772S KW | Owners Manual - Page 6
devices. 5. Regularly check the safety interlock system for proper function, as described later in this manual. If the safety interlock system does not function properly, have your machine serviced. 6. Check brake operation frequently as it is subjected to wear during normal operation. Adjust and
Cub Cadet PRO Z 772S KW | Owners Manual - Page 7
may also include a carbon canister. Please contact Customer Support for information regarding the evaporative emission control configuration for your follow the warnings and instructions in this manual and on the machine. SAVE THESE INSTRUCTIONS! Section 2 - Important Safe Operation Practices
Cub Cadet PRO Z 772S KW | Owners Manual - Page 8
on the machine before attempting to assemble and operate. Symbol Description READ THE OPERATOR'S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate WARNING- ROTATING BLADES Do not put hands or feet near rotating parts or
Cub Cadet PRO Z 772S KW | Owners Manual - Page 9
9 Slope Gauge Section 2 - Safe Operation Practices (OK) Figure 1 20° Slope (TOO STEEP) Figure 2 20° dashed line USE THIS SLOPE GAUGE TO DETERMINE IF A SLOPE IS TOO STEEP FOR SAFE OPERATION! To check the slope, proceed as follows: 1. Remove this page and fold along the dashed line. 2. Locate a
Cub Cadet PRO Z 772S KW | Owners Manual - Page 10
. Please read this entire manual prior to operating the equipment. It instructs you how to safely and problems or questions concerning the machine, phone your local authorized service dealer or contact us directly. We want to ensure your complete satisfaction at all times. Throughout this manual
Cub Cadet PRO Z 772S KW | Owners Manual - Page 11
and secure the seat into place with the hardware as shown in Figure 2-6. 3. Remove the shoulder screw (a) and flange lock nut (b) from manual bag and install the seat lockout bracket (c) as shown in Figure 2-7. (b) (a) (c) Figure 2-7 4. Insert the wiring harness (a) into the bottom of the seat
Cub Cadet PRO Z 772S KW | Owners Manual - Page 12
counter-clockwise to decrease. See Figure 2-14. Figure 2-14 To vary the lumbar support (700 and 900 series) move the lever on the right of the seat up Grease Points Before operating the tractor, refer to the Service section of this manual to check the lubrication and grease points. Grease and lubricate if
Cub Cadet PRO Z 772S KW | Owners Manual - Page 13
in place with the seat prop. Remove the bolts and hex nuts from the manual bag. NOTE: The positive battery terminal is marked POS. (+) (a). The negative hex nut (f). See Figure 2-18. NOTE: If the battery is put into service after the date shown on top/side of battery, charge the battery prior to
Cub Cadet PRO Z 772S KW | Owners Manual - Page 14
display. The hour meter and service minder is activated whenever the ignition switch is turned to the "ON" position. Keep a record of the actual hours of operation to assure all maintenance procedures are completed according to the instructions in this Operator's Manual and the Engine Operator
Cub Cadet PRO Z 772S KW | Owners Manual - Page 15
seat back. Refer to the Assembly & Set-Up section for instructions on adjusting the lumbar support. Seat Prop (Not Shown) The seat prop is located on Your Machine 1. Before you operate the tractor, study this manual carefully to familiarize yourself with the operation of all the instruments
Cub Cadet PRO Z 772S KW | Owners Manual - Page 16
Service section. 11. Adjust the seat for operator's maximum comfort, visibility and for maintaining complete control of the machine. Refer to the Assembly & Set-Up section for instructions /EFI (Electronic Fuel Injection) Engines section. Manual Throttle/Choke or Throttle/Automatic EFI (Electronic
Cub Cadet PRO Z 772S KW | Owners Manual - Page 17
the operator's seat to the most comfortable position that allows you to operate the controls. Refer to the Assembly & Set-Up section for instructions on adjusting the seat. 4. Adjust the steering wheel tilt with the steering column adjustment lever. 5. Release the parking brake. 6. Move the throttle
Cub Cadet PRO Z 772S KW | Owners Manual - Page 18
Executing a Zero Turn 1. A zero turn maneuver can be executed while the machine is moving in the forward or reverse directions if the steering wheel is turned completely in the one direction. 2. To turn clockwise when going forward, turn the steering wheel clockwise and depress the forward drive
Cub Cadet PRO Z 772S KW | Owners Manual - Page 19
Standard set-up Stems (Dandelion, Bahia, Buckhorn, etc.) Very Lush &/or tall grass Low cut height (1 to 2") Mulch Material collection Abrasive (sandy), dry Wet Reconfigurable Mower Inner Baffle Installed Discharge Baffle Installed Cutting Blades Gauge Wheels Hi-lift Low = 3 to 5" Removed
Cub Cadet PRO Z 772S KW | Owners Manual - Page 20
Service Maintenance Schedule Check gasoline level Check hydraulic hoses for leaks Check tires & tire pressure Check deck, mower and hydro drive belts Check blades and blade
Cub Cadet PRO Z 772S KW | Owners Manual - Page 21
Engine Oil • Shell Rotella® T Triple Protection™ 15W40 • Shell Rimula® 15W40 • Reference your engine manual for other approved options Hydrostatic Fluid • Cub Drive System Fluid Plus (Shell TT-SB) • Castrol applications, and has excellent lubrication and corrosion protection. Section 4 - Service 21
Cub Cadet PRO Z 772S KW | Owners Manual - Page 22
skin. Exercise caution to avoid burns. Maintain oil level as instructed in Engine Operator's Manual. Be careful not to spill oil on any of the belts been run flat or seriously under inflated. Have it inspected and serviced by a qualified tire mechanic. Battery Information Warning! • Should battery
Cub Cadet PRO Z 772S KW | Owners Manual - Page 23
. 4. Recharge the battery before returning to service. Although the tractor may start, the engine a bypass rod that will allow you to manually move the tractor short distances. Warning! Do not will cause serious starting problems. • Read the product manufacturer's instructions and recommendations. •
Cub Cadet PRO Z 772S KW | Owners Manual - Page 24
fuel in the carburetor has been exhausted. • Referring to the Engine Operator's Manual, drain the fuel from the carburetor bowl. 3. Clean the engine and the engine. The use of water will result in shortened life and reduce serviceability. Removing The Tractor From Storage 1. Check the engine oil. 2.
Cub Cadet PRO Z 772S KW | Owners Manual - Page 25
disabled tractor following the normal starting instructions previously provided; then disconnect the clutch must be repaired. See your Cub Cadet Service Dealer. Parking Brake Switch • Sit in the This electric clutch is a normally trouble free device. If a problem develops and the blades do not turn
Cub Cadet PRO Z 772S KW | Owners Manual - Page 26
the key from the switch. Protect your hands by using heavy gloves when handling the blades. When servicing the mower deck, be careful not to cut yourself on the sharpened blades. 1. Remove the deck as instructed in the Deck Removal section on page 24. 2. Jack up the front of the mowing deck
Cub Cadet PRO Z 772S KW | Owners Manual - Page 27
nut to between 100 lbs-ft and 120 lbs-ft. Changing the Spindle Assembly 1. Remove the deck as instructed in the Deck Removal section on page 24. 2. Jack up the front of the mowing deck about one the neutral position. If your mower creeps, see your Cub Cadet service dealer. Section 4 - Service 27
Cub Cadet PRO Z 772S KW | Owners Manual - Page 28
Troubleshooting Problem Excessive vibration Uneven cut Mower will not mulch grass (If Equipped w/Mulching Kit) Cause 1. Cutting blade loose or unbalanced. 2. Damaged or bent cutting blade. 1. Deck
Cub Cadet PRO Z 772S KW | Owners Manual - Page 29
Tool Tire Sealant Oil Filter Wrench Armortek Non-Stick Spray Carburetor & Choke Cleaner Phone (800) 965-4CUB to order replacement parts or a complete Parts Manual (have your full model number and serial number ready). Parts Manual downloads are also available free of charge at www.cubcadet.com. 29
Cub Cadet PRO Z 772S KW | Owners Manual - Page 30
manual problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have a question regarding your warranty coverage, you should contact the MTD Consumer Group Inc Service Department at 1-800-800-7310 or at http://support written instructions
Cub Cadet PRO Z 772S KW | Owners Manual - Page 31
WARRANTED PARTS: The repair or replacement of any warranted part otherwise eligible for warranty coverage may be excluded from such warranty coverage if MTD Consumer Group Inc demonstrates that the outdoor equipment has been abused, neglected, or improperly maintained, and that such abuse, neglect,
Cub Cadet PRO Z 772S KW | Owners Manual - Page 32
warranty coverage owner must present an original proof of purchase and applicable maintenance records to the servicing dealer. Please see the operator's manual for information on required maintenance and service intervals. The limited warranty set forth below is given by Cub Cadet LLC with respect