Home » Cub Cadet Manuals » Lawn Mowers » Cub Cadet TANK L 60 KW » Manual Viewer

Cub Cadet TANK L 60 KW TANK L 60 KW Operator's Manual

Cub Cadet TANK L 60 KW Manual

View all Cub Cadet TANK L 60 KW manuals

Add to My Manuals
Save this manual to your list of manuals

Cub Cadet TANK L 60 KW manual content summary:

Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 1
• Maintenance • Service • Troubleshooting • Warranty Operator's Manual Tank LZ WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. Printed In USA CUB CADET LLC
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 2
engine manufacturer's Owner's/Operator's Manual, packed separately with your machine, for more information. Table of Contents Safe Operation Practices 3 Assembly & Set-Up 11 Controls & Features 15 Operation 18 Maintenance & Adjustment 25 Service 33 Troubleshooting 38 Replacement Parts 39
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 3
instructions in this manual before attempting to operate this machine. Failure to comply with these instructions owner's manual for information regarding US Environmental Protection Agency (EPA) and California Air resources Board (CARB) regulations relating to emission control systems, maintenance
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 4
the age of the operator. 5. The owner/operator can prevent and is responsible for accidents or injuries occurring to them, other people or property. General Operation 1. Read, understand, and follow all instructions on the machine and in the manual(s) before attempting to assemble and operate. Keep
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 5
instructions provided with the approved accessory or attachment. 32. Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower manual use care and good judgement. Contact your customer service gauge included as part of this manual to measure slopes
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 6
operator's waist at all times, except when the instructions and safe operation practices in this manual and on ROPS are: the machine and should exposure (sunlight, rain, etc.). The ROPS and seat belt are integral parts of this machine and should not be tampered with, modified in any manner
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 7
. h. Never over fill fuel tank. Fill tank to no more than ½ inch manual. "Use of parts which do not meet the original equipment specifications may lead to improper performance and compromise safety!" 8. Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 8
safety and instruction labels, owner's manual is supplied by the engine manufacturer, and provides additional information relating to the emission system, warranty, maintenance tanks for evaporative emission control. California models may also include a carbon canister. Please contact Customer Support
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 9
assemble and operate. Symbol Description READ THE OPERATOR'S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate WARNING- ROTATING BLADES Do not put hands or feet near rotating parts or under the cutting deck. Contact with the blade
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 10
Slope Gauge (OK) Figure 1 15° Slope (TOO STEEP) Figure 2 15° Slope 15° dashed line USE THIS SLOPE GAUGE TO DETERMINE IF A SLOPE IS TOO STEEP FOR SAFE OPERATION! To check the slope, proceed as follows: 1. Remove this page and fold along the dashed line. 2. Locate a vertical object on or behind
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 11
only. Exceptions, if any, will be specified. 3. The two hydrostatic transmissions are equipped with a bypass valve that will allow you to manually move the tractor short distances. 4. Engage the transmission bypass valves by engaging the parking brake. See Figure 3-2. The tractor will still not
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 12
access can be gained by reaching in from the sides over the tires fuel tanks. 9. Reset the parking brake, and resintall the clevis pin, spacer, 3. parking brake handle. 10. Remove the deck wash system nozzle adapter from the manual bag and store for future use. Cut the wire tie holding the chute
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 13
4. Install the upper ROPS section onto the lower ROPS "posts". 8. Move the upper ROPS section to the upright position, and Install the bolts and nuts. See Figure 3-5. insert the locking pins with their retainer hairpin clips. See Figure 3-7. Retaining Washer Bolt Locking Pin Lock Nuts
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 14
ft-lbs. 4. The same adjustments should be made to both sides of the mower. To adjust the front-to-rear angle of the drive control levers: 1. Loosen the shoulder screw and flange lock nut from the the support cable and install the support cable with the previously removed hardware. See Figure 3-11.
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 15
when the seat is in the desired position. See Figure 3-13. Lumbar Support Suspension Mechanism Figure 3-14 The seat tilt is controlled by the knob on the forward to tilt the seat forward. See Figure 3-14. To vary the lumbar support move the lever on the right of the seat up and down. See Figure
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 16
. 4. Attach the black cable to the negative battery terminal (-) with the bolt and hex nut. See Figure 3-15. NOTE: If the battery is put into service after the date shown on top/side of battery, charge the battery prior to operating the tractor. 16 Section 2- Assembly & Set-Up
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 17
Choke Knob Transmission Bypass Lever Accessory Switch Receptacles Fuel Gauge Fuel Tank Cap Fuel Tank Cap NOTE: References to LEFT, RIGHT, FRONT, and and will take some practice to master. Refer to Operation for instructions on using the control levers. Ignition Switch The ignition switch is
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 18
and service reminders (oil, lube) in the digital display. The tachometer/hour meter is activated whenever the ignition switch is turned to the "ON" position. Keep a record of the actual hours of operation to assure all maintenance procedures are completed according to the instructions in this manual
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 19
foot platform, and is used to raise and lower the mower deck. To raise the mowing deck to the transport position top of each of the two fuel tanks and measures the fuel level in each tank. Fuel Valve The fuel valve is located instructions on using the bypass feature. Section 4 - Controls &
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 20
-Up section for instructions on adjusting the seat. Safety Interlock System This machine is equipped with a safety interlock system for the protection of the operator. If the interlock system should ever malfunction, do not operate the machine. Contact your authorized Cub Cadet Dealer. • The safety
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 21
. Follow all federal, state and local guidelines regarding the use of personal protective equipment. Carefully practice maneuvering the machine using the instructions in the following section "Driving the Tractor." Practice until you are confident that you can safely operate the tractor. Driving the
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 22
5. Move the throttle control lever forward to the full throttle (FAST) position. NOTE: Although the tractor's engine is designed to run at full throttle, when performing a practice session the tractor must be operated at less than full throttle. This only applies to practice. WARNING! Always
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 23
3. The greater the fore-to-aft distance between the two levers, the sharper the tractor will turn. 4. To execute a "pivot turn," move the turn side drive control lever to the neutral position, while moving the other control lever forward. NOTE: Making a "pivot turn" on grass will greatly increase
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 24
Executing a Zero Turn WARNING! When executing a zero turn, the tractor MUST BE STOPPED. Executing a zero turn while the tractor is moving can significantly reduce your control of the tractor and will cause severe turf defacement to occur. 1. Stop the forward or reverse motion of the tractor by
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 25
. Fully raise the deck or move to a non grassy area before engaging the mower deck. 1. Use the deck lift pedal to raise the deck to its highest clevis pin in the desired position and secure with the clevis pin. Lower the mower deck to the desired height setting. 6. Slowly and evenly push the RH and
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 26
removed, and grass conditions are generally dry. NOTE: Refer to the attachment and accessories section for a list of part numbers. Reconfigurable Mower Standard set-up Stems (Dandelion, Bahia, Buckhorn, etc.) Inner Baffle Installed Discharge Baffle Installed Removed Installed Cutting Blades
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 27
6 Maintenance Schedule Check gasoline level Check tires & tire pressure Check deck, mower and hydro drive belts Check blades and blade bolt tightness Check safety switches for proper operation Check fluid level in transmission oil expansion reservoir Check engine intake screen/cover Clean mower
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 28
Shaft Assembly Pivots Grass Collection System Lid Hinges (If Mower is so equipped) LUBRICATION CHART Use a grease-gun filled • Shell Rimula® 15W40 • Reference your engine manual for other approved options Hydrostatic Fluid • Cub Drive System Fluid Plus (Shell TT-SB) • 6- Maintenance & Adjustments
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 29
, see an authorized Cub Cadet Dealer. Engine Refer to the Engine Operator's Manual for all engine maintenance intervals, procedures, specifications and instructions. NOTE: Maintenance, repair, or replacement of the emission control devices and systems which are being done at owner's expense may be
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 30
the mower off the jack and continue mowing. 30 Section 6- Maintenance tank indoors or in poorly ventilated enclosures, where fuel fumes may reach an open flame, spark or pilot light as on a furnace, water heater, clothes dryer, etc. 2. Service the engine as instructed in the seperate engine manual
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 31
Park the mower on a instructions on adjusting the seat. Adjusting Drive Control Levers Refer to the Assembly & Set-Up section for instructions on adjusting the drive control levers. Jam Nuts Eyebolt Figure 6-2 4. Once the proper adjustment is made, re-tighten the jam nuts. Section 6 - Maintenance
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 32
and adjust the other deck wheel to the same height as instructed in step 3. Parking Brake Handle The parking brake handle should feature of the deck and are not designed to support the weight of the cutting deck. The mower deck cutting height can be set using the Maintenance & Adjustments Figure 6-4
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 33
adjust the brake shoes proceed as follows: NOTE: If the brakes need replaced, please see your Cub Cadet Service Dealer. 1. There is an access hole on the lower inside of the backing plate inside the secured. Adjusting Star Contract Expand Figure 6-6 Section 6 - Maintenance & Adjustments 33
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 34
possible. 3. Start the disabled tractor following the normal starting instructions previously provided; then disconnect the jumper cables in the exact reverse problems. If you have a recurring problem with blown fuses, have the tractor's electrical system checked by your Cub Cadet Service
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 35
the PTO is engaged. This electric clutch is a normally trouble free device. If a problem develops and the blades do not turn, first check the 25 clutch is still not working properly, see an authorized service dealer. Deck Removal Remove the mower deck from the tractor as follows: 1. Lower the
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 36
and rotate the idler clockwise on the 60" and 54" decks and counter-clockwise as instructed on page 34. Replacing the Blades WARNING! Before performing any maintenance, disengage servicing the mower deck, be careful not to cut yourself on the sharpened blades. 1. Remove the deck as instructed
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 37
''Bottom'' or "Grass Side" (or with a part number stamped in it) facing the ground when the mower is in the operating position. WARNING! Never mow with of the blade marked ''Bottom'' (or with a part number stamped in it) facing the ground when the mower is in the operating position. WARNING! Use a
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 38
instructed Support Plate Cub Cadet dealer to have the transmission drive belt replaced. Tractor Creeping Creeping is the slight forward or backward movement of the mower when the throttle is on and the speed control levers are in the neutral position. If your mower creeps, see an authorized service
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 39
Troubleshooting Problem Excessive vibration Uneven cut Mower will not mulch grass (If Equipped w/Mulching Kit) Cause 1. Cutting blade loose or unbalanced. 2. Damaged or bent cutting blade. 1. Deck not leveled properly. 2. Dull blade. 3.
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 40
Parts Component 40 10 Part Number and Description 954-04323 754-04327 754-04319 Deck Belt (LZ-48) Deck Belt (LZ-54) Deck Belt (LZ-60) 954-04326 754-04328 754-04296 PTO Belt (LZ-48) PTO Belt (LZ-54) PTO Belt (LZ-60) 954-04320 Drive Belt 942-04417 942-04416 942-04415 Hi-Lift Blade, 17.0 (LZ
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 41
Component Part Number and Description 946-04812 Choke Control 746-05103 Park Brake Cable 925-1745A Ignition Key 631-05176 Discharge Chute Assembly 634-05087 634-05088 Wheel Assembly (LZ-48), 24 x 9.5-12 Wheel Assembly (LZ-54 & LZ-60), 24 x 12-12 634-04750 Wheel Assembly, 13 x 6.50-6
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 42
Cub Cadet Tank tractor. See your Cub Cadet dealer or the retailer from which you purchased your tractor for information regarding price 850-0005 490-850-0008 Part Power Assist Triple Bagger * Weight Kit Power Assist Clam Shell Bagger 54" Mulch Kit 60" Mulch Kit Light Kit (ROPS mount) 72" Snow Blade
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 43
Notes 11 43
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 44
44 Section 11- Notes
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 45
Section 11 - Notes 45
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 46
purchaser or first placed into service. Subject to certain conditions and exclusions as stated below, the warranty on emission-related parts is as follows: 1. Any warranted part that is not scheduled for replacement as required maintenance in the written instructions supplied is warranted for the
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 47
abuse, neglect, or improper maintenance was the direct cause of the need for repair or replacement of the part. That notwithstanding, any adjustment system (soft choke) • Carburetor and internal parts (or fuel injection system) • Fuel pump • Fuel tank 2. Air Induction System • Air cleaner • Intake
Cub Cadet TANK L 60 KW | TANK L 60 KW Operator's Manual - Page 48
CUB CADET LLC MANUFACTURER'S LIMITED WARRANTY FOR TANK LZ/SZ ZERO-TURN COMMERCIAL RIDING MOWER IMPORTANT: To obtain warranty coverage owner must present an original proof of purchase and applicable maintenance records to the servicing dealer. Please see the operator's manual for information on