CyberPower CP1500PFCLCD User Manual

CyberPower CP1500PFCLCD Manual

CyberPower CP1500PFCLCD manual content summary:

  • CyberPower CP1500PFCLCD | User Manual - Page 1
    YOUR ULTIMATE ALLY IN POWER PFC SINEWAVE UPS SERIES CP1350PFCLCD/1500PFCLCD USER MANUAL FEATURES 1. Power Switch 2. Power On Indicator 3. LCD Module Display 4. Down/Display Button 5. Up/Mute Button 6. Enter/Setup Button 7. USB charge ports (Except for CP1350PFCLCD) 8. Battery
  • CyberPower CP1500PFCLCD | User Manual - Page 2
    you to free technical support. Register your product now to receive the benefits of CyberPower ownership. IMPORTANT SAFETY WARNINGS (SAVE THESE INSTRUCTIONS) This manual contains important safety instructions. Please read and follow all instructions carefully during installation and operation
  • CyberPower CP1500PFCLCD | User Manual - Page 3
    User's manual (c) USB A+B Type cable (d) Function Setup Guide PowerPanel® software is available on our website. Please visit www.cyberpowersystems. com and go to the Software Section for a free download. SUPPORTS Active PFC POWER SUPPLIES This CyberPower UPS system supports
  • CyberPower CP1500PFCLCD | User Manual - Page 4
    3 wire grounded receptacle (wall outlet). Make sure the wall branch outlet is protected by a fuse or circuit breaker and does not service equipment with large electrical demands (e.g. air conditioner, refrigerator, copier, etc.). The warranty prohibits the use of extension cords, outlet strips, and
  • CyberPower CP1500PFCLCD | User Manual - Page 5
    more information about the Down/Display Button, please refer to the Function Setup Guide. 5. Up/Mute Button Short press the button to scroll up the function This LED indicator will illuminate to warn the user that a wiring problem exists, such as bad ground, missing ground or reversed wiring. If
  • CyberPower CP1500PFCLCD | User Manual - Page 6
    REPLACING THE BATTERY Replacement of batteries located in an OPERATOR ACCESS AREA 1. When replacing batteries, replace with the same number of the following battery: CyberPower / RB1270X2C for the CP1350PFCLCD; CyberPower / RB1290X2 for the CP1500PFCLCD. 2. CAUTION! Risk of Energy Hazard, 24 V,
  • CyberPower CP1500PFCLCD | User Manual - Page 7
    for support.) E02: Charger Fault - No Charge (Contact CyberPower Systems for support.) E11: Battery Overvoltage (Contact CyberPower Systems for support.) E21 appears whenever the UPS is in silent mode. However, when there is a problem with the UPS, the alarm will still beep even in silent mode. 12.
  • CyberPower CP1500PFCLCD | User Manual - Page 8
    about functions setup, please refer to the Function Setup Guide. TROUBLESHOOTING Problem Circuit breaker button is projecting from the back of plugged in. Contact CyberPower Systems about replacement batteries at: cyberpowersystems.com/support. Turn the UPS off. Wait 10 seconds and then turn the
  • CyberPower CP1500PFCLCD | User Manual - Page 9
    TROUBLESHOOTING Problem PowerPanel® is inactive (all icons are gray). The USB power ports USB power port and then turn the UPS on. Additional troubleshooting information can be found at "Support" at www.CyberPowerSystems.com TECHNICAL SPECIFICATIONS Model CP1350PFCLCDa CP1500PFCLCDa Capacity
  • CyberPower CP1500PFCLCD | User Manual - Page 10
    if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, (877) 297-6937; or submit a web ticket online at cyberpowersystems.com/support. Cyber Power Systems (USA), Inc. encourages environmentally sound methods for disposal and
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

PFC SINEWAVE UPS SERIES
CP1350PFCLCD/1500PFCLCD
USER MANUAL
YOUR ULTIMATE ALLY IN POWER
Cyber Power Systems (USA), Inc.
4241 12th Avenue East, Suite 400
|
Shakopee, MN 55379
|
CyberPowerSystems.com
FEATURES
1. Power Switch
2. Power On Indicator
3. LCD Module Display
4. Down/Display Button
5. Up/Mute Button
6. Enter/Setup Button
7. USB charge ports
(Except for CP1350PFCLCD)
8. Battery and Surge Protected Outlets
9. Full-Time Surge Protection Outlets
10. Circuit Breaker
11. DB9/USB Ports to PC
12. Wiring Fault Indicator (red)
13. Communication Protection Ports (RJ45)
14. SNMP/HTTP Network Slot
(Except for CP1350PFCLCD)
15. Widely-Spaced Outlets Designed
for AC Adapters